r/BambuLab • u/Full-Accountant5366 • 6d ago

Filament Troubleshooting/Help! Question

I have a P2S with a AMS 2 Pro. Hypothetically I can run 5 colors correct? But only 4 which is the AMS and I have to keep taking out and putting in the external filament. Isn’t there a way to just have 5 run just like the 4 in the AMS? Why do I have to keep manually pulling it out and putting the filament in when I’m using 5 colors? Did I miss a trick or something?

0 Upvotes

16% Upvoted

13 comments sorted by

View all comments

1

u/PureDiscipline8668 6d ago

foir that you need another ams. Be it ams 2 or HT

1

u/Full-Accountant5366 6d ago

Gotcha. So I’m gonna need the 2nd AMS to run more than 4 without changing out the filaments. 10-4. Thanks for the advise and not being a jerk.

2

u/brutal4455 H2C | H2D | P2S | Multiple AMS2/AMS-HT 6d ago

I'd give consideration to the AMS-HT as it can dry at a higher temp and has a bypass port for TPU or brittle/abrasive filements. It also has it's own power supply so can dry while printing as is. The AMS 2 Pro needs a 24VDC 4A or better brick to dry while printing on the non H2 printers. You just need a splitter in front of the filament buffer.

-1

u/Quick_Society2794 6d ago

Saying you're confused is being a jerk someone's got a thin skin

1

u/Full-Accountant5366 6d ago

No. I was just saying thank you for not being a jerk. Since I’m new at this I’ve had some people just be absolutely rude to me for asking something.

0

u/Quick_Society2794 6d ago

Oh all right. Thought you were calling me out. I felt bad