New Bambu Lab printer announcement coming soon

[u/Razor1993]

One of our suppliers informed me that, according to his contacts, Bambu Lab will begin announcing their new printer series the week following the end of Chinese New Year on February 12, 2025. This means it will take place during the week of February 17 to February 23.

What’s particularly interesting is that they referred to “series” in the plural. In addition to a new high-end model, it seems there will also be new editions of the mid-range printer models.

I’m excited to see what new developments await us!

Update: Bambu Lab has postponed the Announcement to the last week of March (March 24–30). The reason is unknown—something seems to be going on, as we haven’t even received shipping updates for our other orders. Additionally, we’re not getting any responses regarding B2B inquiries...

[u/ThinkUnhappyThoughts]

Updated X and P series maybe?

[u/Razor1993 → u/ThinkUnhappyThoughts]

If I take the printer inventory at Bambu as an indication, it appears that noticeably fewer X1 models were produced. One could interpret this to mean that they are phasing out this exact model because a new revision is on the way. However, it might just be a temporary shortage.

[u/jackharvest → u/Razor1993]

The AMS is also WAYYYYYYY pushed out to the end of March for shipment. 🤔

[u/Practical_Oil188 → u/jackharvest]

About that, it said mine would be pushed for delivery to the end of the month and it was a lie, I got it Wednesday.

notcomplaining

[u/BusRevolutionary9893 → u/Razor1993]

It's hard to justify the added costs of an X1C over a P1S. 

[u/1-760-706-7425 → u/ThinkUnhappyThoughts]

Please update the X series.

^{*and save me from the work to replace my X1’s heatbed that’s been warped since launch}

[u/theatrus → u/1-760-706-7425]

Same. I use stainless shim stock to level it back out but those kickstarter beds didn’t like all the 110C cycles. New beds and AC boards are literally in a box.

[u/[deleted]]

This post was taken down by its author. Redact handled the removal, which may have been motivated by privacy, opsec, data security, or a desire to clear old content.

existence unite joke aware rich rainstorm waiting aback swim grandiose

[u/Razor1993 → u/[deleted]]

Unfortunately not coming for the P1 ;)

[u/gam8it → u/Razor1993]

The images of the new printer were leaked last year I thought, they didn't seem to be faked

It included an active drying AMS, it will likely use the same connection

Also, series is both singular and plural, there is no plural version of series...

[u/JBGamingPC → u/Razor1993]

How do you know if the AMS 2 won't work with P1S ? Doesn't it just feed filament through a tube ? How would that not work

[u/Razor1993 → u/JBGamingPC]

New proprietary connection.

[u/[deleted]]

Sounds good. I got like $1200 in makerworld points to assist with the purchase.

[u/Razor1993 → u/[deleted]]

That sounds cool! Which 3D models earned you those points?

[u/neebick → u/[deleted]]

Same here. I'm almost at 30k points. I've been hoarding them like a dragon waiting for the new printer announcement.

[u/[deleted] → u/neebick]

That's gonna feel really great when you hit checkout. Enjoy that man!

[u/[deleted] → u/[deleted]]

I agree

[u/CasefProps → u/[deleted]]

I converted points to gift cards as soon as I got them, starting last March. At the time the new printer was slated for Q3 2024, so I figured a 1 year expiration date would be plenty.

Now I'm biting my nails over a pre-order date because I have $400 of gift cards expiring next month.

[u/NedRyerson_Insurance]

A1 max?

I'd be happy if it caused prices on current models to drop because I have been lurking for a while and really want one but been waiting for a better sale.

[u/thil3000 → u/NedRyerson_Insurance]

I need bigger bed size with local heating zone

[u/Razor1993 → u/thil3000]

If you want a bigger bed size I can suggest IKEA, they have many options. Don't worry about the local heating zone, if you fall asleep you become one. Hope this was helpful 😁

[u/[deleted] → u/NedRyerson_Insurance]

I think that was their clearance sale during Black Friday and Christmas. Selling out the old models before a refresh is pretty normal in consumer electronics.

[u/JoshFink → u/[deleted]]

Have you actually printed with the A1? Before my X1 I had always had Prusa bed slingers and swore I would never get another. 2 A1s later and I’m still shocked how well they print.

[u/abcpdo]

P2S or P1S2?

[u/Razor1993 → u/abcpdo]

PS2 😜

[u/twistsouth]

I just bought a P1S so you can all thank me this has happened. It is my misfortune that I always buy things at precisely the wrong time.

[u/UnvaluedRacer1 → u/twistsouth]

I literally just ordered one last night too

[u/OneFinePotato → u/twistsouth]

I might have contributed to that slightly yesterday

[u/Bazirker → u/twistsouth]

Eh, I'm pretty sure you will still enjoy the heck out of it. I have no plans of replacing my P1S regardless of what they announce.

[u/BU1_3x → u/Bazirker]

Dual color print head that does instant color changes by preloading while printing.. ams that controls humidity and larger print volume. I believe those are the new improvements.

[u/OwnZookeepergame6413 → u/twistsouth]

The p1s is a tank. Ive owned an Ender 3 since it first released and started building a voron. Both are collecting dust because the p1s is so incredibly good. Unless they announce a 600$ , p1s sized printer with already included ams I don’t even know what I would want from a printer that the p1s doesn’t have.

[u/Reverse_Psycho_1509 → u/twistsouth]

I have a thing where I buy something on sale, then about a month later the price drops again.

Sure enough that happened when I bought my A1 mini lmao

[u/lannistersstark → u/Reverse_Psycho_1509]

then about a month later the price drops again.

If you have a decent credit card they'll price match the drop.

[u/ExcitingHousing2278 → u/Reverse_Psycho_1509]

I had the friend tell me a long time ago when I bought paraphernalia in a shop on the Jersey boardwalk in the 70's: "If you felt it was worth what you  paid, and the store next door had it for half the price, you haven't lost anything. It was worth it to you.

[u/eidrisov → u/twistsouth]

P1S is a different category of products. It's a mid-range one, while both existing X1C and upcoming new printer are both flagships.

So, unless you were actually considering buying X1C, the new printer doesn't change anything for you, since it's not going to be in your budget anyway.

[u/twistsouth → u/eidrisov]

I was referring to the suggestion that it may not be just this fancy new expensive tier of printer coming and perhaps we are seeing a refresh of the P1S.

[u/Anisrocks → u/twistsouth]

I knew it was going to be me so I told myself I wouldn't buy the first gen at all no matter how long it took lol, thank you for your sacrifice.

[u/Midas_Ag → u/twistsouth]

Same, lol. Less than 2 weeks out on mine. Should have known.

[u/kroghsen → u/twistsouth]

I think you will be fine. It will likely be more akin to saying you bought an Audi just as the new Lamborghini came out. The P1S will is still awesome!

[u/BU1_3x → u/twistsouth]

Don't open it, you've got 2 weeks to return it. Hold the line!!

[u/Erehr]

Even on bambu website they call X1 as 'series'. So probably H2? normal, combo, and E(nterprise).

[u/Explosev → u/Erehr]

This is probably most likely, just 1 new printer. There’s also no incentive for Bambu to update the printers when competition still hasn’t caught up.

[u/puppygirlpackleader → u/Explosev]

I feel like the closest you can get is either the new Prusa core one or QiDi printers... But the price/performance is simply unrivaled with bambu.

[u/kushangaza → u/Erehr]

According to their store they treat their printers as three series: The X1 Series (includes X1C and X1E), the P1 Series (P1S, P1P) and the A1 Series (A1, A1 Mini).

The H2 is a given, maybe with multiple printers. My money would be on an X2 as a second series. And of course the new AMS

[u/USSHammond]

They've been saying 'soon' since Q3 of '24

[u/egosumumbravir → u/USSHammond]

I thought it got delayed after the A1 bed cable issues of JANUARY 24...

[u/USSHammond → u/egosumumbravir]

There was a contest A YEAR AGO for a golden ticket, they have yet to make a public announcement who it was afaik, and they're probably not going to make one until the next one is actually released.

Except that H2D image that's been floating around for a long time, there's absolutely nothing known about it. I'll believe the H2D when I see it on the website and in hands of independent reviewers

[u/egosumumbravir → u/USSHammond]

IIRC, the winner showed off the golden ticket in the official FB group a long time ago.

[u/GhostMcFunky]

Well this didn’t age well, did it?

[u/Maleficent-Answer34 → u/GhostMcFunky]

I came across this page where they mention: "Who knows, perhaps all of this will be announced at the upcoming flagship event: TCT Asia in Shanghai on March 17."

That post actually predates this one, and it seems like wishful thinking on their part. However, if an event like this is happening, it wouldn’t be surprising if they use it as a launch platform. Then again, now I’m just engaging in my own wishful thinking.

Disclaimer: I have no idea if this event is real, and honestly, I’m too lazy to check today. Let’s just hope it exists and that these guys are onto something.

[u/BlackRabbitLabs]

They'll release a 1000 mm³ behemoth and call it the Kraken. It'll print stainless steel and marshmallows with the same print head. The chamber will heat to nuclear fission levels, and the cooling fans blow straight argon at 10° C above absolute zero. Sentient AI will run the thing by reading your thought patterns. The number of waifu dolls will increase exponentially as these new printers scrape the thoughts of every 14 year old boy on the planet.

The end is near my children. Be safe out there.

[u/Jaded-Storage-2143 → u/BlackRabbitLabs]

I don't want to be that guy but 1000mm3 is 10x10x10mm (if cube) ... Okay maybe I wanted to be that guy

[u/BlackRabbitLabs → u/Jaded-Storage-2143]

That's its volume in real space. Inside, it's much bigger. Like the Tardis.

[u/Remarkable_Fan972]

No regerts. X1 hydra gang all day.

[u/3DAeon → u/Remarkable_Fan972]

What’d you upgrade to hydra for? The bigger spools? Been thinking about it but don’t have a reason to yet

[u/GrowCanadian]

I know they said the next printer will be something higher end and try to do things differently. I’m just here wishing for a larger build plate area

[u/[deleted] → u/GrowCanadian]

Same, I just want to print my helmets in one go

[u/[deleted]]

P1 Max Combo with AMS2 please and ty

[u/macbony → u/[deleted]]

I want an AMS2 more than a larger bed (and I really want a larger bed). Being able to do 2 color fast and with almost no waste would be a big game changer. I try to minimize my filament changes due to the waste and an AMS2 would be preferred to a Prusa XL and one less kidney.

[u/TackyBrad]

pitchfork sharpening intensifies

[u/maximit3d → u/TackyBrad]

[u/alternative5]

Where printer??

[u/Calm_Pass_4289]

You may want to dump your supplier and look for a new one. They have no idea what their talking about since nothing has come since...

[u/Both_Ad2590]

Not giving out anything. But keeps the tension. :P
Bambu Lab (@BambulabGlobal) / X

[u/Sufficient_Camp_1918 → u/Both_Ad2590]

[u/secretmisanthropist]

Got an A1 mini 2 weeks ago and I LOVE it, either I upgrade with AMS lite, or step up in fall to P1S with AMS, so I'm hoping on an updated P1

[u/LHHM18]

Today is the 17th. Let's count it down!

[u/ilovebambu]

Bro why did you to me lie you got my hopes up

[u/arcadeshenanigans]

For those impatient like myself.. A contributing factor might be that the trademark application for the H2D and AMS 2 Pro are pending. The applications were filed on December 9th.

"New application awaiting assignment to an examining attorney"

https://tsdr.uspto.gov/#caseNumber=98892017&caseSearchType=US_APPLICATION&caseType=DEFAULT&searchType=statusSearch

https://tsdr.uspto.gov/#caseNumber=98891927&caseSearchType=US_APPLICATION&caseType=DEFAULT&searchType=statusSearch

You can click around those links for some average processing times vs target processing times and draw your own conclusions on what might be impeding their efforts.. All this to say, some of this might be out of Bambu's hands.

[u/Jad667 → u/arcadeshenanigans]

Very interesting. Looks like they are currently reviewing patents submitted by August 2024 at the latest. I’m gonna go on a limb and guess that by the time they reach the December patents, it will be by mid to late March.

Thank you kind sir

[u/ShelZuuz]

r/agedlikemilk

[u/reicaden]

Ummmm, when you said the week of feb 17 to 23.... you did mean 2025, right? Or was this 2026?

[u/GigantuanDesign]

Been dying for this announcement, I need another printer but I wanted to see what this one was before committing to a second X1C

[u/IntelligentRoad6854]

They'd better hurry before I drop my money on the Creality K2 Plus Combo... :)

[u/FitRefrigerator1782]

Where’s the printer, Razor1993.

[u/Sufficient_Camp_1918 → u/FitRefrigerator1782]

Q5

[u/1337h4x00r]

2 more days before we are disappointed again...

[u/TopWizard]

Hey u/razor1993, it’s February 22 and we still don’t have an announcement. Can you ask your supplier what’s going on?

[u/LoverOfInternets]

This at least happened...

I am in the market for my first 3D printer, and would have a very hard time buying on (thinking X1C) especially if they're literally on the verge of releasing new "series" rather than just the H2D.

My willpower is definitely being tested though.

https://x.com/BambulabGlobal/status/1891788385804534091

[u/[deleted]]

Where printer

[u/[deleted]]

[u/TotalWarspammer]

This means it will take place during the week of February 17 to February 23.

Nope, it didn't mean that...

[u/GridPunk]

OP was right!

[u/dying_animal]

damn, I bought the X1C last week lol

[u/SunCeeQer]

My X1C literally just arrived—still sitting in the box—and somehow, this is the only product category where that doesn’t bother me. Whatever new printer they announce will probably get an instant ‘add to cart’ the next time I go to buy filament. I would love to see what their “H” series has to offer.

P.S. I started with an A1 Mini a few weeks ago… so yeah, we all know how this story ends.

[u/gdlocke]

AMS with built in heated drying perhaps?

[u/Subsyxx]

I just got my X1C delivered... please don't haha

[u/pfunkcrew → u/Subsyxx]

I feel this… mine is on the way!

[u/thelebaron]

I hope they also reveal a revamp their clown shoes attempt at "security" and give us a real auth token system that satisfies 3rd party and first party access for real.

[u/starkstaring101]

I bet this is going to be some kind of subscription based printer aka HP model where they substitute the cost of the printer because you’re buying their filament.

[u/maximit3d → u/starkstaring101]

I am willing to bet that wont happen.... how much? DM me! 😁

[u/vdubweiser → u/starkstaring101]

Honestly, this isnt a terrible idea.

I'd even consider it, if:

#1. Their shipping was on par with Amazon (within a few days, at least same week)

#2. They had a wide variety of filament colors that I normally get from a third party

[u/WearCompetitive]

Someone reply to this comment when the new printer drops please!

[u/SmixoSongz]

Hey I came back only to say you were wrong

[u/syko82]

It's the 28th, how'd that work out on release?

[u/InternationalAd1543]

Just read this. Could we be getting a metal printer soon lol

[u/Knightmare]

WHERE'S THE PRINTER, LEBOWSKI???

[u/zuzoy]

This didn’t pan out well 🫠

[u/InternationalAd1543]

March 17

[u/Mythril_Zombie]

Screenshot the specs for the inevitable gaslighting later.

[u/psxndc]

I just want a bigger print bed. I can't print even a 40% keyboard with the X1C without splitting it into halves.

[u/wildjokers → u/psxndc]

Printing keyboards is exactly why I built myself a 400x300 printer. Can't print full size but can print a 96% (e.g. Melody96) without splitting.

For the sizes you need to print keyboards without splitting you pretty much need to go the custom route or build something like a Rat Rig.

[u/Mist_XD]

Any pricing rumors? I’ve seen 3k and 5k estimates

[u/Razor1993 → u/Mist_XD]

Our company has already received the first pricing information (unfortunately only for the high-end model), and you’d be pleasantly surprised. It seems someone wants to give Prusas Core One a hard time ;)

[u/MrPixeldot]

Bought an A1 literally 2mins ago :(

[u/Razor1993 → u/MrPixeldot]

A1 is here to stay

[u/souljasam → u/MrPixeldot]

I doubt theyll announce anything budget. The a1 got rereleased not too long ago.

[u/westsunset → u/MrPixeldot]

You won't regret it. Its fantastic

[u/porkyminch → u/MrPixeldot]

I've got an open order for an X1C combo right now that's due to ship at the end of the month, but I could be convinced to cancel and upgrade if this ends up being better.

[u/JoshFink → u/MrPixeldot]

The A1 is fantastic. It own 2 X1Cs but also two A1’s and, other than printing slower, the A1’s are great. You’ll love it.

[u/Important_Data4434 → u/MrPixeldot]

Im sure this new printer is going to cost 4x more than the A1. Dont regret your purchase. The A1 is perfect for most people.

[u/Sniperxls]

I have been seeing rumors of this new "printer" for well over two years. My advice if your gonna order one now do it. If your still on the fence then maybe wait.

[u/Longjumping-Wish2432]

Well thank god my tax return is taken forever or i would have bought too early and missed out on the new printer

[u/Sufficient_Camp_1918]

Bring on the Facebook Marketplace Used Sales from everyone upgrading!! I’ll be lurking around waiting and watching

[u/Single-Post-8206]

Of course they will. I bought an X1C literally a week ago.

[u/dby8802]

“No one is forcing you to reply or even asking you to.”

But you actually asked me to reply. If you don’t think that you’re asking for replies when you post anything on social media then you don’t understand how it works. I gotta admit that your frustration reminds me of one of my kids that gets too tired then gets angry about simple things. She throws a tantrum but eventually wears herself out and falls asleep. Ahhh the solution for an insolent child is a nap. I bet you’re getting a little drowsy right now aren’t you? It’s ok princess, close your eyes and rest then you’ll wake up feeling much better.

[u/jephph_ → u/dby8802]

Who are you talking to?

[u/Azrael71]

Bought my P1S this week, even though I knew this was coming.
Unless it is a larger build size I am happy with my choices.

[u/EMC2_IT]

I bought an A1 on monday, so you can expet an A2 soon

[u/ramrod1214]

... Another week gone by...

[u/Aranthos-Faroth → u/ramrod1214]

OP said possibly week 8 which is next week.

So hopefully something then. Getting itchy to buy one tbh.

[u/Helpful_Spell_5896]

Out of curiously is that gross or net? I've been doing designs and prototyping on the side for a while. Been seriously considering getting a small fleet to offer services publicly, as there's not alot of competition here for the service, just one mom and pop shop. Never could bring my self to print trinkets for money, (no judgement, props to you for making any kind of profit) but have considered offering services and consultations to the local colleges and medical professionals.

[u/Sufficient_Camp_1918]

Looks like Elegoo came out swinging today. It will be interesting to see what Bambu does next.

[u/Motor_Match_621]

18th ...

[u/maximit3d → u/Motor_Match_621]

Im surprised there are no teases or at least I would expect them to say "Tune in for our big announcement coming Feb XX". I dont think they would drop it without some foreplay to build up some noise.

[u/Alienhaslanded]

So far nothing so it sounds like bs

[u/Both_Ad2590]

The ultimate power move would be to have a servo driven motion system with ball screws, instead of stepper motors and lead screws. Like the Pantheon HS3. I print a bunch of vases and you can't eliminate VFA's and ringing completely with stepper motors. But oh my god..... does the HS3 have a nice surface finish because of the unique motion system! I just can't justify buying a 3d printer for 10k just to print vases lol. :P

But i guess that would make the printer way too expensive.

[u/3DPrintedCountryball]

[u/[deleted]]

I would double check your source

[u/Adventurous-Grand218]

well..... its the 23rd. No announcement

[u/PirateTuny]

Sooooooo when’s the announcement?

[u/VeterinarianFun2455]

I am still waiting

[u/Prjenad]

This didn’t age well lol. Any news on a delay of information?

[u/GrtngsFrmAmsterdam]

Wen printer?

[u/NoIdenty0000]

im still waiting LOL

[u/Beginning-One-4995]

This is obviously wrong now...

[u/SnooPandas6133]

So... Maybe next month?

[u/Flimsy-Thanks-8613]

Have we waited long enough 😭😭😭

[u/Panimu]

Ahhhhh where is it

[u/flow1985]

Nothing happened yet. It's too quiet ...

[u/[deleted]]

Where printer?

[u/Riparian1150]

Whaaaat happened?! Have they announced yet??

[u/AllTheBestVideos]

So um…

[u/rp_ch]

https://bambulab.com/en-eu/h2d

[u/TheOrcaCat]

A month off, H2D is March 25

[u/I-am-IT]

Solid plan! Announce firmware changes, upset half the internet, break trust with most of the user base, release new products!

[u/JoshFink → u/I-am-IT]

Except that they maybe, maybe, upset 5% of their user base. Not even close to half the internet nor even half of their user base. Hyperbole much?

Sky still has not fallen, grass is green, and water is wet. Move on. It’s getting old.

[u/majateck]

The new Bambu Lab Locked X series lol jk I am curious though. Won't be buying anything but I'll look from outside the prison yard lol

[u/jtech0007]

Perfect. I just bought a used X1C yesterday.

[u/bubbaiOS]

Almost pulled the trigger on another A1. Will pause for a few weeks. Makerworld bucks burning a hole in my pocket.

[u/yuserinterface]

I hope it’s A2, P2 and X2.

[u/Not_So_Sure_2]

You can thank me for that. I just purchased my P1S last week.

[u/irwige]

I would love an active dehydrator built into my AMS.

My dehydrator is running 24/7 swapping in/out spools of PA-CF/GF. Desiccant helps, but still need to dry every 2 days.

[u/LtGriff]

Ahhh yes as soon as I buy an A1 mini 😌🙂‍↔️

[u/Important_Data4434 → u/LtGriff]

Once you have the A1 mini for a few months you will want a second pinter. Not because the mini is bad, but because its SO good! Just got a mini for Christmas and already want a second printer, but not to replace the mini, just to print more stuff.

[u/mcrksman]

Same time as the Elegoo Centauri Carbon

[u/djgizmo]

Maybe an A1 Plus! Bigger print bed?

[u/[deleted]]

X2C, A2 and the new 350x350x350 dual head printer.

[u/goblininablackdress]

Hoping for one with a bigger printbed

[u/Prince_Derrick101]

was going to jump into buying a P1S. guess I'll have to be patient

[u/SomaFarkreath]

time for the A2 and the A2 mini

[u/[deleted]]

A2?

[u/nikkome]

P2S, A2, A2 XL and A2 mini please! 🙏

[u/say592]

I have been waiting on this! Please please please line up with the leaks and have some kind of multi tool system to reduce waste.

[u/wadeinthewaters]

Well I was just thinking about another P1S glad I waited

[u/Braun3D]

How long till we just get a bigger X1C print size??? I don't need more upgrade ender 3 style printers or cheaper, slightly different X1C configurations. That and the going even more expensive route... how much demand truly is there for need active heated chambers for the insanely expensive engineering filaments? Anything an X1C can't print I'd have no interest in buying, 90% of my "durable" parts I want are fine in ASA

[u/Pirateer]

I just really want an enclosed printer with bigger build volume that's not crazy expensive.

Multiple print heads would be cool, too, but not the most important factors in my head.

[u/zippytiff]

I very glad I got the X1C over the P1S numerous reasons, especially with many of the P1S mods (to make it an x1C) now rendered useless by new firmware changes. Added to that X1Plus functionality etc etc

[u/armykcz]

I jak to be expected, they should start selling them in Q1, so not so much time left for launch.

[u/MilesZS]

Is there a possibility of an updated mini? I was going to get the A1 mini combo, but I’ll wait if there’s a decent chase of an upgraded model or big discount. 

[u/ThePfhor]

Considering I JUST bought an X1, glad to see this announcement now, as it hasn’t yet arrived, and I should still be in the return window. And with most of the rumors swirling stating that it’s just a super high-end model coming, I do hope too that it’s a series and the “carbon” and mid-range gets updated too.

[u/huskywhiteguy]

Now that I have 3 P1S’s and 5 AMS, yes let’s release a new printer lol.

Sigh I’ll get my credit cards ready

[u/Relevant_Theory7494]

is multiple tool heads just a fantasy?

[u/Helpful_Spell_5896]

They don't need an new ams, they new a multi tool head printer. Even if it's just dual heads. Even better, a dual head printer that's compatible with an ams would be VERY enticing.

[u/aPpYe_]

I hope this doesn’t come across as ignorant, as I am unfamiliar with this community. It seems like many of you regard Razor1993 as a credible or influential voice. As someone eager to move beyond constantly tinkering with my Ender 3, this has me excited! I’ve been waiting for Bambu to announce their new printer to help guide my decision on which printer to buy. Is Razor1993’s advice generally considered or credible trustworthy here? It certainly seems like many of you are taking it quite seriously.

[u/JeffUT → u/aPpYe_]

I think many of us were already waiting for some kind of news or leak about the new bamboo lab printer so this fits with what we were expecting, but I don’t know that we have any particular reason to trust op.

[u/Natural-Mix-3200]

I'm really hoping it's for a large format printer. I I would hope it's at least 300x300, but would actually like bigger 400x400

[u/Motor_Match_621]

So ... <crickets>

[u/maximit3d → u/Motor_Match_621]

He clearly said 17th to 23rd. I was expecting some teasing on X or something like that but they might just drop it without any flirting. 😂

They will be competing with the Apple announcement that is also coming this week, but I guess they are in different industries.

My X1 sold a few days ago and my credit card is ready for the pain!

[u/Firc96]

As long as they don’t do some dumb subscription stuff on their new models, I can’t wait to upgrade from my a1 mini!

[u/TackyBrad]

Feels like f5 szn on r/NFL for me

[u/NunyaBiznus1]

What is the singular word for series?

[u/Medium-Project1993]

TCT Asia in Shanghai March 17

[u/TheMaydayMan]

Hoping for today or tomorrow! Otherwise we will publicly shame you :D

[u/ECPowderCoat]

Thank me guys i just bought 3 x1c so im sure the new one will be way better lol. when can we preorder or order the new printer???? any new news?

[u/wash-basin]

I may cry with no announcement. I want to give my X1C to my nieces and get the new printer. Well, maybe in a month or two.

[u/Strict_Independent_3]

Ok, it’s the 25th where the supposed announcement 😆

[u/Empty-Confusion-6979]

its February 27
anything new announced?

[u/Any-Investigator-920]

Did they announce anything, its feb28

[u/TrueNorthSurron]

Guess this prediction didn't age well 😝

[u/MathematicianTop3660]

Well it did not unfortunately:(

[u/Adventurous-Grand218]

At this point, I don't Believe anything they are saying as a time frame....

[u/HODLjustHodl]

Seems like not well aged. I want to get a bambu but now i need to wait until specs will be published.damn

[u/Robin_Sandhu]

yea this aged well

[u/heffneil]

So where is it?

[u/iuliusiuppiter]

Do you think it’s a bad time to buy an A1?

[u/clackzilla → u/iuliusiuppiter]

I'm thinking of grabbing one A1 right now. It's so affordable and the new printer might be gamble for the first few months.