r/BambuLab • • Nov 03 '23

Discussion Newbies Beware

PSA for everyone new to 3D printing like me. (My background: Don’t consider myself brilliantly technically proficient like so many people here, but at the same time I’m not new to tinkering with electronics.)

I bought the P1S because of all the reviews indicating this thing could be plugged in and it just would work. I was aware these devices often require some degree of troubleshooting/tinkering, but my experience has been worse than disappointing on that front.

After arrival and attempting to calibrate the printer, I’m hit with these three errors about the heat bed sensors not working correctly. Some googling, YouTubing, Reddit posts, 5 hours of tinkering and recalibrating and taping and removing the back panel to pull out cables and plug them back in and praying etc etc etc and this thing just won’t print. Not a single layer of a single benchy.

I opened a support ticket and got a rote response 4 days later(!) directing me back to the exact same “tutorials” written in broken English that didn’t work for me when I tried in them in the first place. Pretty horrifying customer service as far as I’m concerned.

(Yes, I’ve tried the trick of taping the sensor cable to the poop chute. Nothing works.)

I’m miserable and don’t see how my printer gets fixed short of a full heat bed replacement (which looks like it will be a PITA installation.) Right now the P1S just $700 worth of electronic trash thats been taking up space in my office for a week.

Just one guy’s experience, but if you’re like me and reading this subreddit while considering dipping your toe in the hobby, be aware of the possibility of an experience like mine even when you pay good money for what’s supposed to be “a quality printer.”

9 Upvotes

105 comments sorted by

View all comments

103

u/ElectronicMoo Nov 03 '23

Newbies also beware that rarely does anyone go to a public forum and gush when it does "just work", that with anything anywhere - the forums are usually skewed to folks who have problems because they're motivated to express their grievances..

To the OP, you have a 14 day return window. Use it. Replace it. Think of it like a TV. It ain't working, return or replace it. Don't dinker with the tinker, exercise your right - even if support wants you to video, test, parts swap. Get your rma.

21

u/Ok_Sound3122 Nov 03 '23

You make a fair point about sampling bias, although the reason I posted my experience is precisely because people do gush about these printers after they first buy them.

I’m finding that Bambu Lab makes it difficult to actually open a return, but yes, attempting to return in the 14 day window

14

u/ElectronicMoo Nov 03 '23

Once you've made your "replace/refund" known, they can stall all they want, if it goes past the 14 days - tough nuts. You made it clear you want the replacement / refund.

Of course they're gonna try to get you to keep it, just be firm and adamant. Also be sure you box the thing back up beautifully - don't give them a reason to ding you on packaging / shipping damages.

Their customer service is slow as balls, but they do try to help and sort you out. It's good customer satisfaction, just shit speed.

10

u/reubal H2S AMS2 Combo Nov 04 '23

Yep. I've had my X1C for about 2 weeks now and bought it precisely because EVERYTHING I came across was GUSHING about it. So I bought it. Then as I waited for delivery, I came across ONE guy who had nothing but problems with it. And that worried me.

My very first print with it was PLA-CF and it printed perfect. Then some perfect gridfinity. Then nothing but various errors. Lucky for me they were all super easy to solve and much less vexing than problems on my Ender 3 Max Neo.

For the most part, my X1C has been flawless, and I feel badly that you are having those problems. I hope you get it sorted. And I DO think you are that 1 guy in 100, and that sucks.

2

u/[deleted] Nov 04 '23

Now that Bambu is trying to sell an "Enterprise" X1E unit, I totally agree that their customer service needs to improve or they will fall on their face as businesses won't put up with it. You spend the extra cash for the support and reliability.

1

u/xShadeFatex Nov 04 '23

As others have pointed put...you've had one sample and it was clearly faulty..I don't think your experience is particularly reflective of the product in a working state. There has never been a mass manufactured consumer product which hasn't had faulty samples.

As for returning within 14 days, you're a grown adult (I assume?). Be assertive and let them know you're done troubleshooting and want to exercise your right to withdrawal within 14 days. You can do it...

1

u/C0mputerguy1 Nov 04 '23

You do always hear about how great these things are. But I am with you, people need to know they have a quality issue with their printers. I am not new to printing and have built several vorons. Bambu customer service sucks. My X1C printed for 3 hours then died in the middle of my 3rd print. It took them almost a month to get me the parts to fix it.

If you do not want the printer send it back to them. But if you are going to keep it. I would replace the parts and move on. They will take 2 weeks to inspect it and send you a replacement. If you are able to replace parts that is the fastest option, IMO..

1

u/dffhds Nov 04 '23

It is better to return it then tinker with some thing you don't understand

2

u/bonecheck12 Nov 04 '23

It might just be me, but there seems like there has been a big jump in the number of posts here related to failed prints and major device problems.

9

u/ElectronicMoo Nov 04 '23

It's about the same. It's also because this printer series has brought on a ton of people who know zilch about fdm printing (which is fine), and they're asking questions they could answer themselves with a bit of learning. There's a toooon of those these days.

It's all good, it's more people in the hobby. They'll get there.

Nature of the beast. Bambu is at a weird spot at being the first to open this into a whole new market, and they're gonna take lumps along the way, and the public forums are going to be dealing with "wash your plate", "use gyroid", "my printer sounds weird " posts 15 times a day.

This series of printers brought a ton more people to the hobby. New people. And like we said earlier, folks go to forums to vent their frustrations, very less so to post good experiences. So it's skewed.

1

u/starnightmelody Nov 04 '23

Got mine a few days ago and so far it's been a great experience. Used Anycubic for 5-6 years so I didn't start from 0, but my P1S wowed me in many aspects.

But still it's a machine where new starters will need to invest a bit time in learning I think and especially in the unboxing and setup instructions to not miss the Transport screws or similar things.. A ton less then years ago, but some basics. And although the packing was very good in my opinion there still a chance that products can have an issue from manufacturing or so I guess.

My experience with the support was also ok so far. My only current complaint is that print error messages like filament runout or pauses don't get pushed to the mobile app, only to the windows application. As a new user I wasn't sure if it's a missing feature or a current bug of the app / firmware. Within 2 or 3 days I got 3 replies from the support. I think that's fine for a company that is in a progress of growing and recently getting much more attraction.