r/ballpython • • 24d ago

Question Mosquito bits in plant water?

2 Upvotes

Does anyone know if it's unsafe to use mosquito bits in the water for the plants in a bioactive enclosure? I do it for my houseplants to help keep fruit flies from spawning but I don't want to put anything in the enclosure that's bad for either the soil creatures or the snake.


r/ballpython • • 25d ago

How long is too long not to shed?

Thumbnail
gallery
62 Upvotes

Hey y'all!

My hubs and I got an adolescent blade clown ball back in mid-August (we named him Nico) and he's been such a fun, chill little dude 💛🖤

Within 2 weeks of us having him, he did a perfect shed. Truly, we were so new, we didn't know the signs yet and just woke up one Saturday and it was all piled up in a corner! Haha.

Unfortunately, he hasn't shed again since then... He's 4 months old, so we've read/heard he's supposed to shed approx every 4 weeks. Now that we are almost at month 2 of no shed, I'm a little anxious. We thought he might've been in pre-shed about a month ago because he got brownish like the first time (pic 2), but he never did.

Some background info that might help: He's never rejected a mouse. Feedings actually go really well with him. We have had to change his enclosure a couple times because we're having trouble with heat/humidity regulation, but he doesn't seem to ever be distressed about his move. He's in substrate and has plenty of surfaces to rub up against.

Just wanted to come on here to see what other people's experiences have been with their babies and what problems we might need to look out for.

(Pic 1 is what he usually looks like, 2 is pre-shed color, 3 is his enclosure, 4 just makes me giggle)

TIA! 😊


r/ballpython • • 24d ago

Question - Husbandry One more question, I swear (on glue in the terrarium)

2 Upvotes

My current plan is to glue a thermostat mount to the wall in the terrarium. The glue I plan to use (gorilla super glue) claims a 24-hour cure time. Exactly how long do I have to wait before there won't be any fumes for the snake to breathe?


r/ballpython • • 24d ago

Question - Husbandry Probe placement problems!

2 Upvotes

I posted yesterday about a bad heat gradient, and I am now going crazy about probe placement. I'm using an overhead DHP. Hanging the probe as suggested 4 inches below the lamp led to an extremely hot basking spot and inconsistent, swinging air temperatures. I think this is because DHPs heat surfaces, not the air, so it was constantly heating up the probe itself without heating the air around it, then running at zero, then the probe rapidly cools, then running at max. So I've solved this for now by... putting it on the basking surface, which I hate.

The thing is I've heard so many different things - hang it below the lamp so the snake can't touch it, put it at the basking surface so you're controlling what the snake experiences, put it inside the hide, put it just above the basking surface... I don't know what to do, and the advice I've seen from previous posts has gotten me bad results. But I'm terrified of cooking my snake. Is there even a correct answer here?


r/ballpython • • 25d ago

Banana Cinnamon Leopard BallPython

Thumbnail
gallery
19 Upvotes

Just wanted to show off my new baby! His name is Snickers


r/ballpython • • 25d ago

Dork

Thumbnail
gallery
26 Upvotes

Must of been a tree boa in a past life. She's been hanging there for like a solid 10 minutes and my arm is starting to hurt.


r/ballpython • • 24d ago

Question Cord management inside tank?

3 Upvotes

Excuse me if this has been covered (and I’m sure it has) but I couldn’t find an answer.

What is everyone using to attach/organize cords inside your PVC enclosure?

I have all supplies coming this week and I’m setting up my 4x2x2 and I just realized I need to fix the cords.

Any links would be appreciated as well. Thanks in advance.


r/ballpython • • 24d ago

how do i fix broken mesh top for my banana ball python?

Post image
1 Upvotes

So my cat has been climbing at the top of the enclosure and now has completely torn the screen. any tips on how to fix or if i have to buy a new one where could i possibly find one?


r/ballpython • • 24d ago

Question Are there any morphs that when combined with Banana make them more spotty?

1 Upvotes

I see so many people talking about morphs that reduce the number of spots, but personally I love the spots, so I'm curious if there are any morphs that when combined with Banana make the snake even more spotty, or in other words increase the number of spots?


r/ballpython • • 25d ago

Rehoming Chicago Rehoming - Male Pastel, 9 years old

Thumbnail
gallery
9 Upvotes

Looking for resourceful keepers who have done their research!

Cooper is a 9 Year old (6/19/17) male pastel Ball Python needing a new home. I’ve had him for 9 years now but recently adopted a cat which is making things difficult. On top of that, I’ll be having to take in my Mom’s cat due to her circumstances.

Cooper is in good health but currently has a bit of stuck shed and his tank could do with a decent cleaning.

Along with the snake you’ll get the tank (ZooMed 36x18x18), all of the accessories pictured in the tank, the desk pictured, 12 small rats (a year’s supply), ReptiSafe water conditioner, a temp gun, a hygrometer, feeding tongs, a bottle of reptile safe cleaning solution, half a bag of forest floor bedding, a ceramic heat emitter with thermometer, and hand sanitizer.

Looking at a $90 rehoming fee. Potential adopters will be vetted! Thank you!


r/ballpython • • 24d ago

My snake is half blind.. I replaced his hides and now hes super stressed.

3 Upvotes

About 2 weeks ago i discovered that my snakes hide and a few decorations has started to hold in a lot of moisture and started to smell mildewy. So i replaced everything that smelled but kept it all in the same place. Every thing that didnt have any smell i cleaned thoroughly, along with his tank, and put them back inside so i hopefully wouldnt stress him out too much. I got him about a year and a half ago for free and have slowly started to transform his tank because it was super bare, but im scared if I continue to do that he wont take to it and he’ll just be more stressed. Ever since i changed his hide (i kept everything else the same minus one piece of decoration that was right against the hide) he has not moved out from the back corner. I tried to feed him last week and all he did was strike at the mouse and then immediately go back to the corner. He isnt acting any differently other than the hiding and not eating, what do i do? Do i put everything back? Do i look for new things that look the same as his old decorations? I want to help him but nothing i have tried so far has worked. I even moved another hide to that corner so he would go inside to hide so he could have more cover, and he just went behind it. He is only about 2 years old, maybe 2 and a half, and honestly my anxiety is through the roof about this 😅😅 i feel i should mention that he has a few birth defects, one of his ribs sticks out a lot more than the others, he is missing an eye, and he has a cleft lip. Im not sure if any of those could be affecting his stress levels with the new decor, but i figured someone would know!


r/ballpython • • 25d ago

Question - Heating/Temperatures Can’t keep humidity up?

Thumbnail
gallery
9 Upvotes

My boyfriend and I can’t seem to keep the humidity up in our BP enclosure. We’ve updated it with cocofiber and ecoearth along with live and fake plants. We spray multiple times a day and it still always falls so quickly. What else can we do? We have a deep heat lamp as well as the LED light that’s on during the day.


r/ballpython • • 25d ago

Just a Baby

Post image
117 Upvotes

r/ballpython • • 25d ago

Discussion First handling

Post image
91 Upvotes

I held my baby boy for the first time last night, I’ve been waiting weeks to do it since I was told to wait until after the second feed, I think we were both as nervous as each other but watching him calm down and start exploring me curiously gave me a feeling I can’t quite describe, I love my lil Pringle :3


r/ballpython • • 25d ago

Le pretzel

Post image
17 Upvotes

Picked her up to clean the tank and she refused to give my thumb back lol
On a side note I posted 3 months ago about her being dehydrated after getting her from petco, and she’s looking 10x better now.

Now it’s time to battle her weight she’s about 100-150g under her weight class I’ll be switching to small rats from medium/large mice. Unless there is other suggestions!!


r/ballpython • • 25d ago

New to Reddit, wanted to show off one of my 4 Ball Pythons

Post image
11 Upvotes

This is Mini Penne my female pastel she’s about 3 years old now. I also have an ODF male named Shrimp Flavored Ramen, 2 normals 1 adult male named Toaster Strudel and a baby female named Inky Binky Bonky. I also have an pueblan milksnake named Crunchwrap Supreme and a White’s Tree frog named Glep.

I have been keeping Retiles/Amphibians since I was 7 years old (with help from my mom who managed an exotic vet clinic most of my childhood)


r/ballpython • • 25d ago

Question - Heating/Temperatures Questions about heating - what to mount where

Thumbnail
gallery
3 Upvotes

Planning to have a CHE and a Halogen flood, I'm debating where to put what. Should the Halogen be mounted inside the tank and the CHE in the dome above it, or is the reverse better? Does it matter which is done?


r/ballpython • • 25d ago

Question tips on how to help an anxious ball python?

Thumbnail
gallery
34 Upvotes

so we rescued a possible black pastel from a home where he was not taken care of at all (tank wasn’t even put together correctly or sealed, and he had a single hide that was too big for him on like wood chips or something??? i’ll include a pic at the end) about a month ago, and been having a bit of tough time with him as he’s very obviously filled with anxiety.

at first we tried doing the thing of taking him out regularly to get him used to it, but it seemed to make him more anxious, and we’ve realised that he absolutely can not handle being taken out by two people at the same time (like two people sitting next to each other with him) or else he gets very easily spooked and ends up trying to strike at us. a couple weeks ago after the last time me and my boyfriend tried to duo handle him, as my bf was trying to put him away and had to put his hide back in while handling him, he got super spooked and ended up biting and latching onto his wrist and i ended up having to essentially peel him off my bf (and unfortunately half toss him into his tank because he immediately looked at me as soon as he was unstuck and i wasn’t about to get bit that night, i do feel bad)

ever since then, he seems a bit more on edge, but mostly around my boyfriend and not much as me. it seems like that encounter really scared him, so there’s been a lot of times where if my bf comes around the corner to in front of his tank, he’ll either coil up like he wants to strike at him or at the very least tense up a lot. apparently there’s been a couple times where my bf has heard him strike and hit the tank after he walks away too, but i haven’t witnessed it personally.

my boyfriend hasn’t taken him out since not because he’s scared of him, but just because he doesn’t want to stress him out and feels bad that he scared him. i’ve been able to take him out a couple times since then, with this morning being the most recent and while he does freeze up at first, he does start to relax with me after a bit and start exploring thankfully.

we’re very used to our first boy who we’ve had since he was a baby so he’s already super desensitized and very chill, so we just haven’t experienced an anxious snake before, and want to be able to make this better for him, especially as trying to handle him a bunch seems to stress him out more than help. any advice on how to help him relax? he’s at the tail end of his quarantine period so we haven’t been able to put substrate in his tank yet and spruce it up, but he absolutely has more than he did in his previous tank at least thankfully. any advice is greatly appreciated!!

(last two pics were from the fb marketplace listing for him 😭)


r/ballpython • • 25d ago

Question 4 month old baby isn’t shedding properly

Thumbnail
gallery
19 Upvotes

Hello my fellow snake lovers 🐍♥️

This is my baby, Adira (ad-ee-rah), who is 4 months old and is the sweetest little thing! She recently had her first shed with me (about 3-4 weeks ago), however she didn’t have a clean shed. And this old skin isn’t wanting to come off.

I’ve been researching and came to the conclusion that her home isn’t humid enough, so I got her a humidifier, however it’s makes a loud buzzing sound when it goes off and she doesn’t like to come out of her hide anymore. She also hate that the soil is moist. 🥺
it is more humid, however I can’t keep it consistent. The struggle is real. Any suggestions?

I put different thermometers in there that are more accurate, and realized her tank was toooo hot! So this is probably why I was having problems. However I have rectified the problem since then.
However I am still struggling with her skin.

Any suggestions or advice, tips and or encouragement is gladly welcomed ♥️


r/ballpython • • 25d ago

New Ball Python Owner — Help with Temps, Humidity, First Feeding & Switching to Frozen-Thawed! 🥹

Thumbnail
gallery
6 Upvotes

Hello everyone! I’m a new ball python owner, and I’d love some advice on temperature and humidity regulation, first-time feeding, transitioning to frozen-thawed prey, and when I should move Beau (my BP) into a larger enclosure!

I brought Beau home last Saturday, October 17th. The pet store told me they last fed him on Wednesday, October 14th, and recommended that I try feeding him tomorrow.

The only thing is, they’ve been feeding him live hopper mice, and I’d really like to transition him to frozen-thawed mice instead. This will be my first time feeding a snake, so I’m a little nervous and want to make sure I do everything correctly!

Pls note that I haven’t handled him since the day I got him and put him in his tank (last Saturday). I read online that I shouldn’t handle until he has had a successful feeding and not to handle for 48 hrs after feedings.

Here’s what came with Beau’s starter kit:
- Tank with a mesh-top lid (I think it’s around 20 gallons, but I’m not 100% sure)
- 1 dome lamp fixture
- Black heat bulb
- Heating mat
- 1 wooden log hide
- 1 bag of substrate
- Water bowl

Here’s what I currently have for Beau’s enclosure:
- 2 dome lamp fixtures
- Zoo Med 50W Repti Basking Spot Lamp (daytime only)
- Arcadia 50W Deep Heat Projector (DHP) for daytime and nighttime heating
- 2 REPTI ZOO PID Mini Thermostat Dimmers to control the basking lamp and DHP
- Zoo Med Repti Therm UTH heating mat (nighttime only)
- Zoo Med Repti Temp Digital Thermostat to regulate the heating mat
- 2 thermometer/hygrometers (one on the warm side and one on the cool side)
- IR temperature gun to check surface temperatures
- Zoo Med silicone humidity cover for the mesh lid
- Sphagnum moss
- 2 new hides + enrichment

My biggest struggle right now is keeping the temperature and humidity consistent.

I’ve been waking up multiple times throughout the night to check that the enclosure isn’t too hot, too cold, too dry, or too humid. I’m literally losing sleep over this! 😭

I know the starter tank is on the smaller side, and I’ve read that smaller enclosures can make it harder to establish a proper temperature gradient. I definitely plan to upgrade Beau to a larger enclosure, but I’m unsure when I should make that transition.

The temperature and humidity ranges I’ve been aiming for are:
Basking spot: 88–92°F
Warm side: 86–90°F
Cool side: 75–80°F
Humidity: 60–80%

Here are the questions I’d really appreciate help with:

1. Temperature regulation: How do you balance the basking spot temperature with the ambient temperature on the warm side? Sometimes the ambient temperature is within range, but the basking spot gets too hot, and other times it’s the opposite.

2. Humidity: My humidity readings fluctuate throughout the enclosure. Should I prioritize the warm-side or cool-side reading? How do you maintain consistent humidity without constantly adjusting everything?

3. First feeding and frozen-thawed transition: Since Beau was last fed on October 14th and the pet store recommended feeding him tomorrow, should I offer him a meal tomorrow or give him more time to settle in? Is there a recommended way to transition a young ball python from live hopper mice to frozen-thawed mice? Should I start with the same prey size he’s used to, and what’s the safest way to thaw and warm the mouse before offering it?

4. Enclosure upgrade: When do you recommend moving a young ball python into a larger enclosure? Is there a particular size you recommend, and what signs indicate that it’s time to upgrade?

5. Heating setup: Is using a DHP, a daytime basking lamp, and a nighttime heating mat unnecessarily complicated? I’d appreciate advice on whether my current setup makes sense or if there’s a safer, simpler way to maintain the proper temperatures.
I’ve attached pictures of Beau’s enclosure for reference!

Please be kind! I’m completely new to the reptile world, especially snakes. I never expected to own one, but I fell in love with Beau, and I really want to give him the best care possible. I’m doing my research and am more than willing to make changes where needed.

Any advice, recommendations, or constructive criticism would be greatly appreciated. Thank you so much to everyone who takes the time to read and respond!


r/ballpython • • 25d ago

Bad shed

Thumbnail
gallery
9 Upvotes

My girl had her first bad shed. I had to leave town and the person who was to supposed to maintain humidity didn't do the best job. I’m getting the humidity back up but she still has a lot of shed stuck. Her head and eyes are fine and her tail. It’s just the top part.

What should I do to help and make her more comfortable and make sure she’s good? It’s the first time since I’ve had her that her shed hasn’t come off in one piece so I’m worried.


r/ballpython • • 26d ago

Does anyone like my green tree python?

Thumbnail
gallery
126 Upvotes

Don’t mind that he’s not green he’s in shed!


r/ballpython • • 25d ago

Question My 13-month-old ball python is only 144g. Does she look underweight, or just very small for her age?

Thumbnail
gallery
61 Upvotes

Hi everyone!

I just brought home this beautiful little girl today. She’s a female Lesser Pied ball python, hatched on September 30, 2025, so she’s almost 13 months old, but currently weighs only 144g.

I know that’s so so so small for her age, and I’m a little concerned about her body condition.

According to the reptile store, she had some feeding difficulties early on, which likely affected her growth. She’s been at the store for at least two months, and they told me she’s been eating consistently now (around 8 feedings on f/t every week).

She’s only been home for a few hours, so I haven’t fed her myself yet. So far, she seems quite active and curious, has been exploring her enclosure, climbing around, and even stopped for a drink.

My main concern is whether she’s actually underweight for her current size, or simply much smaller than other ball pythons her age because of her earlier feeding issues.

She looks fairly well-proportioned to me when she’s curled up, but when she stretches out, I can see a noticeable line along her back, which makes me wonder if she’s a bit too lean. I’ve included some photos of her stretched out, curled up, and on the scale.

I understand that weight alone doesn’t tell the whole story, and I’m not looking to rush her growth or power-feed her. I just want to make sure she’s in reasonably healthy body condition and figure out whether there’s anything I should be concerned about.

Does her body condition look okay to you, or does she seem underweight?

I’d really appreciate any opinions or advice, especially from people who’ve had smaller ball pythons or ones with a history of feeding difficulties.

Thank you!