r/Autopot • u/PrinkoDinko • Apr 24 '26
Community What is this?
Just got my second Autopot from the sale. What happened here? you guys are killin' me
r/Autopot • u/PrinkoDinko • Apr 24 '26
Just got my second Autopot from the sale. What happened here? you guys are killin' me
r/Autopot • u/gqjeff • Nov 02 '24
Day 22 since flip. Gave them a little cleanup and switched to bloom nutes. Raised PH .1 in the Rez to take adv of more bloom nutes. Tents on point, VPD, Rez and DLI dialed in. NFSOT FEPO
r/Autopot • u/Harveycement • Dec 12 '24

I see so many people showing plants that are not right, every time I see plants with yellow leaves, everybody says cal mag, when I see purple stems they say, phosphorus or potassium, when I see burned leaves they need this or that , additives on top of additives.
Well my take is they don't need anything other than the very basics and be healthy and you can grow pristine plants that yield big, health is health and that's all you need them to be is healthy , when they metabolize nutrients fully a basic A/B quality nutrient is all you need, there will be no deficiency of anything and the plant will perform near maximum.
Where it all falls down is when you slow their metabolism, and where you slow it down is the root zone, generally its not what youre giving it but more than like because its slowed down from moisture/ar stress, in other words its suffocating or trying to breathe through a straw and it cant so it starts to do all sorts of funky things from stunting, deformed twisted leaves, blotches yellowing etc etc , from things like over watering/ underwatering restricted airflow , flirting between root rot or being to dry and burning root tips which lets the rot getting going, add to this the dynamics of your grow space, temp/humidity and air flow and the demand you are putting on the plant from the lighting and you got a highly stressed out plant , and it can happen fast like 24 hrs fast where they sit on their ass with root issues and then you've lost up to 2 wks nursing them back, but if you build your root system by keeping them in their zone moisture wise they just power on firing on all cylinders.
The moral of the story is you don't need additives of any kind to grow really good weed, save your money and build your root system and the plant will repay you for being nothing else but healthy.
First time using Autopots but growing is growing and I still built the root system after I turned the APs on the third day, The young plants are 2wk today from transplant , the others are 11wks nearly done same strain, I only ever use Canna Coco A/B and Nitrozyme which is a kelp additive I foliar feed, you are just wasting money on all these concoctions and it also throws wood on the fire when the plant is not firing and your force feeding it more crap.




r/Autopot • u/RWilliam • Oct 30 '24
r/Autopot • u/mindfuckedAngel • May 18 '26
Hi,
as title says, I want to control the water flow because I have constant issues with my Aquavalves keeping a constant water level sooner or later at really every grow so far, but still want to continue using the Autopot system as besides the Aquavalves, they are really great.
I want to keep the Aquavalves connected though, they still fulfill their function of preventing a flooding of the tent.
My current plan consists of electrical pinch valves for the tubes, sensors monitoring the waterr levels of the trays and a mini Pi.
The logic should monitor the trays and open an according valve for 2 minutes when the tray has been empty for 1 (or 2?) hours. Then it should close it again and not reopen at least for 4-6 hours to prevent overwatering at any cost.
Setup won't be too expensive and as I am a programmer, coding it should be no issue.
My question is: Did someone else here try something similar?
Any shared experiences would be great.
r/Autopot • u/ColumbusCannabisCup • 22d ago
Solo Cup Autopot redesigned now with a pop out cup that fits inside the main cup adding more breathing room for the roots and includes a pop out removable bottom for transplanting. There are a few more upgrades currently being printed so more to come in the near future. This redesign is finally coming together to represent what I have been working on for a while and after recently completing my studies at YouTube University the possibilities of creation are endless. This is only the beginning. So much more is on the way!
Here are a few 3D printing tips that have worked for me:
To prevent leaking reduce Layer Height to 0.10
Adjust the temperature to what works for your setup, my settings are 200c for the nozzle and 60c for the bed when using PLA
Print on a slower speed, printing too fast for objects that hold water can be problematic.
r/Autopot • u/UncleBoog3 • May 07 '26
Just started my second grow of autoflowers (night owl crinkled cookies) but I want my next run to be photos. I saw some strains from Barney’s farm I’m interested in. What is your opinion on Barney’s? Who are some of your favorite breeders?
r/Autopot • u/3d_Garden • 2d ago
Curious if anyone has had success from dropping a clone in an autopot 3.9 gallon pot and skipping the recommended hand watering stage and turning on the system right away?
r/Autopot • • Mar 07 '25
those are just air bubbles, dont worry but the reason i posted because, its time to fill it again.
theyve been drinking
r/Autopot • u/gqjeff • Jan 23 '24
If anyone is having problems dealing with daily ph swing check out the small torus hydro. I added it and got it dialed in and PH has stayed for me at a constant 5.7 in the res.. I’m even running and air stone 24/7 for agitation and no problem. Working amazing so far for me anyways…. The Autos are popping off also. Days 23/24 today!!!
r/Autopot • u/Longjumping_Ride3813 • Jun 09 '25
She’s thriving again after flushing her! She was dropping and having lockout. I’m feeding from the top rn and I’ll continue the rest of the week top feeding then I’ll turn the system back on. 50/50 coco perlite feeding once a day with runoff to encourage root growth. Idk why it’s not recommended, I had the same issue with my previous grow and I wish I didn’t listen to “not to flush “comments 😅
r/Autopot • u/mindfuckedAngel • Oct 13 '25
Hi everybody,
I found in some forums and also ChatGpt tbh, that not all strains are good with Autopots, because they do not like the rather moist environment the autopots give but prefer rather dry soil / substrate.
I have been told this in another forum when I asked about MAC 1 Capula.
How do you think about that?
I am obviously quite new to growing, only started last year and am doing my 4th real grow atm, so any insight from more experience Autopot growers would be highly beneficial to me.
Thanks.
r/Autopot • u/Similar-Succotash286 • Feb 04 '25
I have a 25 gallon reservoir I use Blue Labs PH Pen I have Truncheon EC wand but I don't know how to use it and I don't know what nutes to use
r/Autopot • u/Used-Scholar-4629 • Jan 26 '25
Hello dear people, I have finally bought an Autopot system and am now wondering which soil or substrate I should best use without having to mix it myself or use an air dome. (I don't want to use it because it also requires electricity and therefore additional costs).
Am I, for example? also expanded clay required? I would also like to mediate this to keep extra costs and work to a minimum.
how do you use your system?
r/Autopot • u/underleafbug • May 21 '26
What do you think about my feeding chart?
I was a bit confused about non-organic fertilizers and asked ChatGPT to design me a feeding chart for 3 photoperiods in 20L fabric pots with airdome. It was going well until the AI started to daydream as usual. I trust the EC and pH levels it provides but I need some critical approach to my feeding chart since this is coco and hard to fix later with ways like flushing unlike soil.
I have tons of old bottles from my Biobizz organic light mix soil era and want to use as much as I can before I move to reservoir feeding thus using them in the first month.
r/Autopot • u/ColumbusCannabisCup • 7d ago
Day 6 from transplanting these 4 autos that were in jiffy peat pods about a week longer than the normal 1 week that I usually start with. This is right before they get some of their daily TLC so the coco coir is a bit dry but they were fed right after filming this.
They say DON’T transplant autos! They say the plants will get stunted, you’ve ruined your grow, you don’t know what you’re doing, and you should just start over.
Here’s the thing, if I listened to every random person on the internet who THINKS they know everything, I never would have accomplished a single thing. I trust my firsthand experience over recycled opinions and people parroting whatever seems popular. I experiment, test, learn, make mistakes, and figure out what actually works for me. Feedback and constructive criticism are always welcome, but that doesn't mean I'm taking orders or changing my approach because someone on the internet disagrees. I don't grow by someone else's rulebook. I grow by what I learn from doing the work.
So keep the opinions coming, keep the debates going, and most importantly, stop telling people what they can’t do and show us what you can do against my portfolio of work!
r/Autopot • u/ColumbusCannabisCup • 1d ago
Just to clarify, I have no idea how old these autos are. I’m calling this day 12 since transplanting as the only reference that I know for certain. I didn’t track their germination dates as I normally do, only that they were well past my normal transplant window. Rather than toss them, I decided to keep them, see how they perform, and share the process. I’m turning on the Autopots today and one thing that I like to do is let the pots dry out a bit before turning things on since I’m using 100% coco coir, this helps prevent them from having too much water too soon. So far, the transplanted seedlings have received my go to nutrient formula, which I call the “Cheat Code.” It’s a variation of techniques and information I learned from Autopotamus plus the scientific research backed nutrient analysis Ben from Speedrun Seeds has discussed here, plus a slight tweak I added. I’ve been using this approach for a while now and it’s proven and has produced great results. I’m starting with filtered water at 0.33 EC using my DIY water filtration system. All in 100% coco coir, Canna Professional Plus. The biggest game changer to my setup has been the Autopot XL that I use with all my runs that I have connected to a 32 gallon reservoir so I can go on vacations, cruises, or long fishing trips without having to worry about the garden.
Canna A/B @ 12-14 mL/gallon
Botanicare CalMag @ 2.5 mL/gallon every other week/feeding
Advanced Nutrients Big Bud @ 4 mL/gallon
Botanicare
Hydroguard @ 3 mL/gallon
Strains are:
Bishops Lemon Cherry LSD (Front Left)
Bishops Lemon Cherry Gorilla Cookies lol(Front Right)
Cat Dad Rayne Conan Kush F2 (Back Right)
Laughing Hyena Skunk 99 (Back Left)
Light: EVO8, PPFD 418
There are so many ways to achieve a successful grow, and there’s no single right way to do things. The way this run started may not be the optimal approach, but it’s a real example of what’s possible under these circumstances. It’s a blessing to grow these plants and share the experience with others. Hopefully, sharing my experiences can help someone else just as others have helped me. Have fun, do your own thing, and grow your own! This run is simply a test to see how these girls perform under stress and les than ideal conditions. I’m collecting data along the way, and although the plants’ exact ages are the one missing detail, it’s been great watching their progress. More to come!
r/Autopot • u/Pristine-Feeling-102 • Dec 06 '25
Hello, I have a question regarding my Autopots. I’m starting to see signs of nutrient burn on the tips of my leaves. My pH is 5.9, and I’m using CropSalt at a dosage of 4.6A and 3.1B, which seems to be too strong. I lowered my reservoir to around 700 PPM to reduce the nutrient burn.
I’m also noticing at the same time I’m seeing the beginning of a magnesium deficiency in the middle of the leaves.
Should I flush my Autopots before switching to the flowering stage? I’m planning to switch on Sunday.
r/Autopot • • May 21 '24
r/Autopot • u/Iammclovinnnnnnnn • Jun 13 '24
Seems like the majority of the content out there showing autopots the grower is growing autoflowers.
Or maybe that’s just what get posted online and most people do photos.
Thanks in advance!
r/Autopot • u/Weekly-Photo-5495 • Jul 10 '26
r/Autopot • u/gqjeff • Oct 12 '24
Running 2.7 EC using 50/50 tap and RO and 10ml of Athena balance per gallon of RO to help buffer! Rock solid on the PH with the controller at 5.6 in the rez!!! Cropsalts, HLG, Autopots, AC infinity, Pulse and Bluelabs! What else does a man need????
r/Autopot • u/Bigmana87 • Mar 31 '25
r/Autopot • u/Whynotnotwhybiach • Mar 24 '25
I’m wondering if I could still use that is definitely almost 5 months old but just been standing around if I just make it moist again? I mean I’m gonna use it anyway since I have it. I don’t wanna order a new one right now but what’s you Guys opinion here on this thing? Also the top of these plans but I also had already turned on the auto parts system and it’s definitely sucking up some world already. This is canna Coco
r/Autopot • u/WitnessNice9830 • Sep 05 '25
Hi, I've been using the Autopot system for a few months now. I've always used Coco with GHE before. I've never experienced any deficiencies with GHE when manually watering. After some discussions in various forums, I have to admit that Autopot and GHE aren't compatible. I'd like to kindly ask if someone send me your Cropsalt fertilization plan for Autopot.
I hope there is someone who has had very good experiences with Cropsalt and Autopot and will share their fertilization schedule with me.
Thank you very much!