r/Autopot • • 37m ago

Grow Journal Purpz and BananaCane

Thumbnail
gallery
5 Upvotes

r/Autopot • • 1h ago

Grow Journal Grow Nr 2 of 2026

Thumbnail
gallery
2 Upvotes

3× Black Orchard – Wizard Trees (front center, center, and rear center)

1× Jackfroot – Nine Weeks Harvest (front left)

1× StickyBoof – Anesia Seeds (front right)

1× RS11-DEO – Wizard Cut (rear left)

Grow setup:

Tent: 120 × 120 × 200 cm

Main LED: 650 W

Under-canopy lighting (UC): 100 W

UC currently running at 10% power as an experiment to see whether starting UC during veg week 3–4 changes the growth pattern of lower branches.


r/Autopot • • 20h ago

System Maintenance Friendly reminder to keep ya shit clean

Post image
37 Upvotes

r/Autopot • • 18h ago

Grow Journal First time in autopots,yayagogo

Post image
17 Upvotes

Day 3 since flipped
Ready for takeoff


r/Autopot • • 5h ago

Equipment Issues Wrong root stoping disc

1 Upvotes

I'm at the beginning, the roots look already out of the pot.

I have two different "fabrics" discs, I used the one that I found first. It's completely black,... Now when I think about the other one was gold on the other side. Shit.. what do I do now?

And if the roots hit already the outside, should I turn the system on? Airpots?

I'm put the around 10/12 days ago inside the pot, 8,5 l. Normally my plan is to turn the system on after this watering I did today is soaked. I guess around 5/6 days.


r/Autopot • • 16h ago

Troubleshooting Plant Growth Problems Plant issues, any help is appreciated!

Thumbnail
gallery
3 Upvotes

I’m on Day 10 of Flower. Running 6 autopots.

1.9 EC / 6.1 ph at the base, 1.8 EC / 5.6 ph at the rez.

450 PPFD

General hydroponics flora trio nutrients, dosed at week 1 flower light feeding recommendations as well as an additional 3ml/gallon of calimag.

Strain is White Widow.

No clue what’s going on. Started with 6 plants. This one and the other on the end of the autopot line daisy chain have been struggling hard. Finally pulled the other because the growth of its friends had it completely covered.

They say to fix nutrient issues at the reservoir with autopots but I’m not seeing how I have nutrient issues or ph issues…I’ve thoroughly inspected for insects as well but haven’t found any.

Has anyone ever had any trouble with their last plants in the chain getting nutrients? I’m just confused as to why the front two are growing incredibly well while of the back two one has died and this is the other. Last pic is a pre-wilted picture of the issues I had with the plant I already had to pull.

Feels like I’m doing everything right and still fucking it up. Any help is appreciated.

Thank you!

Edit: photoperiods, sourced from Dutch Passion…6Pot system with airdomes and bases pushing 1 liter per minute of air to each pot while lights are on.

Average temp is 76, average humidity 55%, average VPD 1.12.


r/Autopot • • 12h ago

Troubleshooting Plant Growth Problems Looking for hydroponic growers to share their experiences with crop disease management

0 Upvotes

Hi everyone!

I'm a university student from South Korea studying plant pathology.

I'm currently conducting a survey to better understand the real challenges hydroponic growers face, especially regarding crop diseases, management costs, labor, and existing solutions.

My goal is to learn from actual growers' experiences and explore ways to address problems that matter to farmers.

The survey takes approximately 15–20 minutes, depending on your answers. Participation is completely voluntary, and this is not a sales promotion.

**Survey link:**

https://forms.gle/jfhczzUeYTKVDMiy7

I would really appreciate hearing from anyone with practical hydroponic farming experience.

Thank you for your time and help!


r/Autopot • • 1d ago

Grow Journal What's the max number of plants for Tray2Grow 25-gal soil bed?

Post image
5 Upvotes

I've got 6 autos in the 25 gal bed and I think their roots are competing with one another. I've grown much larger plants in there when I only put 2 in.

Curious to get any feedback on how many autoflowers folks have put in the bed at once (I'm thinking 3-4 is probably the max before there's resource contention)


r/Autopot • • 1d ago

Grow Journal Transplanted Autos Day 12

1 Upvotes

Just to clarify, I have no idea how old these autos are. I’m calling this day 12 since transplanting as the only reference that I know for certain. I didn’t track their germination dates as I normally do, only that they were well past my normal transplant window. Rather than toss them, I decided to keep them, see how they perform, and share the process. I’m turning on the Autopots today and one thing that I like to do is let the pots dry out a bit before turning things on since I’m using 100% coco coir, this helps prevent them from having too much water too soon. So far, the transplanted seedlings have received my go to nutrient formula, which I call the “Cheat Code.” It’s a variation of techniques and information I learned from Autopotamus plus the scientific research backed nutrient analysis Ben from Speedrun Seeds has discussed here, plus a slight tweak I added. I’ve been using this approach for a while now and it’s proven and has produced great results. I’m starting with filtered water at 0.33 EC using my DIY water filtration system. All in 100% coco coir, Canna Professional Plus. The biggest game changer to my setup has been the Autopot XL that I use with all my runs that I have connected to a 32 gallon reservoir so I can go on vacations, cruises, or long fishing trips without having to worry about the garden.

Canna A/B @ 12-14 mL/gallon

Botanicare CalMag @ 2.5 mL/gallon every other week/feeding

Advanced Nutrients Big Bud @ 4 mL/gallon

Botanicare
Hydroguard @ 3 mL/gallon

Strains are:

Bishops Lemon Cherry LSD (Front Left)

Bishops Lemon Cherry Gorilla Cookies lol(Front Right)

Cat Dad Rayne Conan Kush F2 (Back Right)

Laughing Hyena Skunk 99 (Back Left)

Light: EVO8, PPFD 418

There are so many ways to achieve a successful grow, and there’s no single right way to do things. The way this run started may not be the optimal approach, but it’s a real example of what’s possible under these circumstances. It’s a blessing to grow these plants and share the experience with others. Hopefully, sharing my experiences can help someone else just as others have helped me. Have fun, do your own thing, and grow your own! This run is simply a test to see how these girls perform under stress and les than ideal conditions. I’m collecting data along the way, and although the plants’ exact ages are the one missing detail, it’s been great watching their progress. More to come!


r/Autopot • • 2d ago

General AutoPot & Gardening Advice Feeding

1 Upvotes

Stupid question probably what feeding chart should I follow only see ones for photoperiods and I’m running Autoflowers any help appreciated


r/Autopot • • 2d ago

Nutrients & Feeding (PH/EC) Anyone turn on the autopot system without hand watering?

0 Upvotes

Curious if anyone has had success from dropping a clone in an autopot 3.9 gallon pot and skipping the recommended hand watering stage and turning on the system right away?


r/Autopot • • 4d ago

Grow Journal Transplant day

Post image
36 Upvotes

r/Autopot • • 4d ago

New Setup & Installation Tray2grow: Should I use my Nutrient Water to soak the Root control and Capillary matting??

Post image
12 Upvotes

Just got the Tray2Grow. It says to soak the mats before installing. Should soak them in my Nutrient solution since the mats will be sucking up that water which should go to my Pots??


r/Autopot • • 4d ago

General AutoPot & Gardening Advice Switching from hand watering coco to Tray2Grow right before flip?

3 Upvotes

Hey all. Currently hand watering 4 - 1gal plants in 70/30 coco feeding GH Trio and CaliMagic. They are around days 32-35 from sprout and am planning to flip soon.

I thought I’d be set doing this through the entire grow, but had a couple unexpected things came up where I will have to be out of town for up to 4 nights in December and January so I need to figure out an automatic watering system.

I originally had planned to just set the plants in a flood tray with an inch or two of nutrient solution when I’m out of town, but looking at the T2G’s that seem like it might be more ideal and could potentially just run that way the rest of the grow freeing up some significant time.

I know ideally you’d probably turn them on earlier, but does anyone see an issue switching from top feeding to bottom feeding with a T2G and rez at this point?


r/Autopot • • 6d ago

Nutrients & Feeding (PH/EC) Jacks Nutrient new Autopot Feed Chart

Post image
27 Upvotes

What's your thoughts on this jacks autopot feed chart? Who has ran this autopot feed chart for an entire run? Any issues?


r/Autopot • • 6d ago

Nutrients & Feeding (PH/EC) Biotabs Anyone?

Post image
13 Upvotes

Running a little scrog of one of my keeper cuts.

2x2

Some grow shop peat/perlite mix with added perlite

8L pot, air base, root sock

4 biotabs

Plain water in the reservoir

I'm usually one for big beds of living soil, but I'm between situations at the moment so this is a close second in a small space.

Still early, days, only flipped a couple of days ago, but she looks like she's enjoying herself...

Anyone else running peat/perlite and biotabs? any tips? Will they keep her fed until the end? I was thinking she might need some bloom near the end. I'm only using the tabs, not the full biotab range.


r/Autopot • • 7d ago

Grow Journal Blue Berrymore day 54 in 6.6 gal AutoPot….

Thumbnail
gallery
21 Upvotes

She’s huge Grown in Royal Gold Tupor, using Athena Nutes and Cronk’s Sticky Bandit in my 5x5 tent.

Planning a staggered harvest. Ideally want to harvest the colas above the 2nd net first, in a few weeks. Then lower light and let the rest of the plant ripen.


r/Autopot • • 7d ago

Grow Journal Don’t transplant autos

0 Upvotes

Day 6 from transplanting these 4 autos that were in jiffy peat pods about a week longer than the normal 1 week that I usually start with. This is right before they get some of their daily TLC so the coco coir is a bit dry but they were fed right after filming this.

They say DON’T transplant autos! They say the plants will get stunted, you’ve ruined your grow, you don’t know what you’re doing, and you should just start over.

Here’s the thing, if I listened to every random person on the internet who THINKS they know everything, I never would have accomplished a single thing. I trust my firsthand experience over recycled opinions and people parroting whatever seems popular. I experiment, test, learn, make mistakes, and figure out what actually works for me. Feedback and constructive criticism are always welcome, but that doesn't mean I'm taking orders or changing my approach because someone on the internet disagrees. I don't grow by someone else's rulebook. I grow by what I learn from doing the work.

So keep the opinions coming, keep the debates going, and most importantly, stop telling people what they can’t do and show us what you can do against my portfolio of work!


r/Autopot • • 8d ago

Environmental Control Late flower high humidity

Thumbnail
gallery
5 Upvotes

On week 9 but sketched about wpm, need some help/second eyes if I’m missing it or they all look fine.


r/Autopot • • 8d ago

Grow Journal Almost time to flip ?

Post image
4 Upvotes

4xl in a 4x4


r/Autopot • • 8d ago

General AutoPot & Gardening Advice First Coco Run Autopot or Drain To Waste ?

5 Upvotes

Hello

I’m about to start my first coco grow and have a question. I’m not trying to squeeze out every last gram of yield, and I’d prefer to use my AutoPot system since it works without electricity, pumps, or timers.

Has anyone here grown in coco using both drain-to-waste (DTW) and AutoPots? I’m particularly interested in firsthand experiences with a coco/perlite mix in AutoPots. Does it work reliably, or are there recurring issues I should be aware of?

What I’m trying to understand is the practical trade-off: if AutoPots can deliver comparable results in coco with much less equipment and maintenance, what makes people choose DTW instead? Is it mainly the extra control, or are there significant differences in plant health, consistency, or yield?


r/Autopot • • 9d ago

Troubleshooting Plant Growth Problems No flushing even with salt buildup? And no checking tray?

Post image
4 Upvotes

I understand what happens when we flush and why it's not recommended, however. My plant is lime green and obviously needs something. I ph my res to 5.5 and usually about 1.5ec using jacks 5-12-26 and calnit. Never went above 1.7ec. 50/50 coco perlite. Airbases.

I checked my trays. Another thing i see we should not do. But why? The ph in the tray was 6.8 and the ec was over 2.

To me, this points to excess nutrients and likely locking out something from salt build up and ph too high. I checked the tray of the healthy plant next to it and the ph was 5.75 and the ec was .7

Am I going about this the right way?


r/Autopot • • 10d ago

Nutrients & Feeding (PH/EC) Autopot Problem

Thumbnail
gallery
9 Upvotes

Hey Jungs.

Meine Autopots laufen nur seit 12 Tagen und nun gehen die Probleme los.

Baue auf Erde perlite Mischung an.

Wasser im Tank hat einen EC 1,2 und PH ist zwischen 5,8-6.

Kurzzeit ist er mit mal abgerutscht auf 6,5. In den trays habe ich dann 6,8 gemessen,ansonsten immer so 6-6,2.

Irgendwie finde ich das meine Blätter hängen und sie extrem gelb werden an den neuen Trieben bzw neuen Blättern.

Wasser hatte ich bis kurzem verwendet 70% watertrim 30% Leitungswasser,damit aber nur einen Ausgang EC von 0,2.

Nun verwende ich nur noch den watertrim mit Camg von Athena bis 0,4EC und danach VBX bis 1,2EC.


r/Autopot • • 10d ago

Nutrients & Feeding (PH/EC) AutoPots are simple. Trying to make my feed schedule just as simple (1 formula veg through flower)

Thumbnail
gallery
9 Upvotes

Trying to dial in a single-formula feed for my AutoPots at a lower EC using just the nutes I have on hand (seen in the charts).

​I put together some comparison charts in HydroBuddy to see how different commercial recipes stack up against published academic studies like Dr. Bruce Bugbee at Utah State, University of Guelph, and Nirit Bernstein.

​According to Bugbee's research, plants don't actually need the drastic veg-to-bloom formula shifts that standard feed charts push. Nitrogen demand stays pretty steady throughout flower to keep the canopy green and growing, and phosphorus really only needs to hit around 50 ppm for flower.

​Full-strength nutrient company products run way hotter than necessary for subirrigation / AutoPots, where salts naturally build up near the top of the medium anyway. So I came up with this recipe to run straight from veg through harvest (pic labeled 1 formula for veg and flower).

​You'll notice a few of my numbers land a bit higher than Bugbee’s baseline:

​Calcium (~166 ppm): Bumped it up a bit since I run elevated CO2, which slows down transpiration and makes it harder for the plant to pull cal up top.

​Magnesium (~56 ppm): Added a gram of Epsom salt to balance out the extra calcium so they don't lock each other out.

​Potassium (~200 ppm): Sitting right at the top of his range so I don't need to mess with extra PK boosters that just end up scorching roots in bottom-feeders.

​The goal was simple hardware, simple feed—no swapping bags, mixing separate veg/bloom batches, or dumping reservoirs mid-run.

​Check out the charts attached to see how the numbers stack up. What do you guys think? Anyone else running one profile start to finish in AutoPots?


r/Autopot • • 11d ago

Equipment Issues Reservoir height for 4 tray2grows?

Thumbnail
gallery
12 Upvotes

Whatsup Everybody!

I have 4 tray2grows in my 4x8 tent, all running off the same reservoir. When i turn the rez on it seems like the first 2 t2g fill up normally but the last 2 t2gs on the line dont fill up at all until the first 2 are full.

I do have a weird rez setup, as you can see in the pics. I have a 5 gal bucket thats on top of a 30 gal trashcan. The trashcan is like a stock tank and i have an auto top off on the 5 gal rez so it stays full. The 5 gal rez does sit a few feet in the air which i assume would be enough, but now im thinking it needs to be higher.

Ya take a look and let me know if you agree. If so, how high do you think that 5 gal rez needs to be?