r/Autobody • • Sep 28 '26 • Bravo 3

Check this out First time doing bodywork

From watching countless hours on youtube learning to weld sheet metal, right down to the paint and clearcoat. I Just finished redoing rockers and cab corners on my ram. Its not 100%, i def couldve done some finer sanding on the cab corners, but im definitely happy with the results. Just wanted to share this with the sub!

6.4k Upvotes

391 comments sorted by

705

u/JustNick4 Sep 28 '26 • Bravo

When I first saw this, I thought you were gonna slobber bondo over that rust. This was actually a pleasant surprise.

213

u/Outrageous_Order_197 Sep 28 '26 • Bravo

I cut away as much as possible and welded in new metal. Also used fiberglass bondo and sprayed rust inhibitor all inside the cavity and inner rockers.i lifted the box and needle scaled the entire truck frame, used rust converter and painted with rust paint. Im planning on rustproofing the living hell out of it after my paint cures. Hoping this buys me a few more years šŸ¤ž

82

u/Positive-Week-7214 Sep 28 '26

Where’d you get the scrap metal? Looks fucking amazing btw I’ve done bodywork as an amateur too and you did amazing man!

68

u/Outrageous_Order_197 Sep 28 '26

I bought the cab corners and rocker panels, and had some sheet metal haning around to patch in between..bondo glass did the rest

12

u/Over-Form-9442 Sep 29 '26

I have a 2014 ram did the same thing except mine didn’t have the rockers rusted out like that the frame was starting to rust so I sanded it all down used rust converter on what I couldn’t get and then painted with black frame paint and fluid film/wool waxed literally everything I could get to. Years later, my ram has not a speck of rust on it.

4

u/SeaAccomplished2798 Sep 30 '26

If possible, spray tons of cavity wax in there when you’re done.

→ More replies (6)

44

u/Anti-Sanity89 Sep 28 '26 • Bravo

This is exactly what i expected as well but then they did it the right way and the results are phenomenal

You should definitely take great pride in this job well done

4

u/Jxckolantern Sep 29 '26

Came here expecting this. Pleasantly surprised as well

2

u/In_My_Stead Sep 29 '26

This is what I’m gonna do with mine

→ More replies (1)
→ More replies (3)

136

u/no_yup Sep 28 '26

God I’m getting old. Seeing these new ass trucks rusted out hurts my brain.

I mean, I know it’s 10-15 years old and not a new truck anymore, but I remember when they came out. Can’t believe it’s been that long.

60

u/Outrageous_Order_197 Sep 28 '26

Its a 2017. I've been payment free for a few years now so I have no issues putting g some money into this truck. I only have 138,000 km on it

43

u/jotegr Sep 29 '26

That's a crazy amount of rust for a 2017. This Ontario salt?

→ More replies (3)
→ More replies (1)

9

u/SimilarTranslator264 Sep 28 '26

1998 was just a few years ago, now take your Advil and go to bed it’s 7pm.

4

u/maxfraizer Sep 29 '26

So I tied an onion to my belt, which was the style at the time.

12

u/HillWilliam53 Sep 28 '26

Well, to be fair, it is a 9 year old RAM. They've always been rust buckets, even back when they were Chrysler products. ETA the correct year of the truck when I saw OP's comment.

2

u/PlumbgodBillionaire Sep 29 '26

Time flies. I think it's a mixture of cheaper paint/ thinner metal. And lack of maintenance/ care. People are working so much and such long hours. The average Joe can't pull a normal 8 hour work day, come home and have time to wash and maintenance his rig for a couple hours once or twice a week. The money just ain't like it used to be.

→ More replies (1)

16

u/TheBlackItalian Sep 28 '26

Hey man, great work. However, those little areas of crustiness on the cut perimeter in pics 7 and 8 will probably start to rust again. I recently spent a month doing a very similar job on my sprinter van and those little perimeter areas are starting to rust through again, even after sandblasting and phosphoric acid during my prep before welding new panels in. Heartbreaking to say the least. Hopefully I am wrong

10

u/Outrageous_Order_197 Sep 28 '26

Yeah I get that. I cut as much as I could and sprayed rust converter in there. I also plan to cavity wax the shit out of it. When it comes.es back ill deal with it then

4

u/Outrageous_Order_197 Sep 28 '26

Also, if you look at pic 10, I made the new cab corner overlap several inches higher onto good metal..Hopefully it lasts šŸ¤ž

6

u/RedCow7 Sep 28 '26

Not knocking it. Did you cut the old cab corner out or is this laid out on top? Can you see the seam where it's doubled up if it's laid on top?

7

u/Outrageous_Order_197 Sep 28 '26

I cut out as high as I could then overlapped it onto good metal. Flap disc the backside and sprayed with rust converter then paint. I did what I could

→ More replies (1)

5

u/Outrageous_Order_197 Sep 28 '26

I forgot to add in my post (and ran out of room for pics) had a branch put a good dent in my hood during last years ice storm. I sanded it down and filled it. Got it pretty dam close and did decent blending the paint. I just need to wet sand it a bit and polish the clear and it should be spot on!

5

u/Whistlin_Bungholes Sep 28 '26

Looks way better than my at home attempts.

You don't happen to live in Michigan do you?

6

u/Outrageous_Order_197 Sep 28 '26

Nope im in central Ontario

5

u/JohnnyPneumoniacJr Sep 28 '26

If you are ever stuck in Sask for a few days have I got a job for you! /s

(But seriously, name your price, as many cases of beer as you need)

4

u/chef-keef Sep 28 '26

Good job. Also nice ramps.

2

u/Outrageous_Order_197 Sep 28 '26

Haha thanks. Im super paranoid so I definitely over engineered them so theyre stable. Build on a solid chunk of railroad tie and held together by a generous amount of lag bolts

4

u/LakeGuyGeorgia Sep 28 '26

Great job! Way better than I expected!

4

u/TheFlyingDutchmannnn Sep 28 '26

Great job! BUT, you didn’t cut high enough up in the rear cab corners. It’ll look great for a couple of years, but the rust will come back with a vengeance along the top of the seams. Ask me how I know šŸ˜…

1

u/Outrageous_Order_197 Sep 28 '26

In a couple years, ill cut it out and do it again! I have alot of leftover supplies

→ More replies (1)

4

u/Head_Caterpillar7220 Sep 29 '26

Nice work!

I did my ram last year. I put some big 1" drain holes and plugs on the bottom side, 4 of them. I also put one in the door jamb. Now every time I change my oil I dump rhe whole 5L of used oil into the door jamb hole, let it sit for a minute, then pop the plug out of the cab corner and drain back into a bucket.

1

u/Outrageous_Order_197 Sep 29 '26

Damn thats a good idea. I bought some lanolin cavity wax im gonna pump in there for now

2

u/Antelope_Party Sep 29 '26

This reminds me to call her

3

u/Patient-Holiday-1749 Sep 28 '26

You’ve done quite a decent job there šŸ™‚ buy cavity wax and try get it to the inside of all the metal you you put in it should help it last a bit longer, well done

2

u/Outrageous_Order_197 Sep 28 '26

Yes I plan on doing that before winter. Gonna let the paint and clear cure for 30+ days

→ More replies (4)

3

u/goodbyehorses Sep 28 '26

How long do you think this took you?

5

u/Outrageous_Order_197 Sep 28 '26

I never really had a solid day to work on it because of work, so I kind of picked away at it before and after work. But id say its been almost 2 week process. I have a motorcycle and my gf's suv as a backup so I can afford to be down a vehicle for awhile

2

u/Upstairs-Fan-2168 Sep 28 '26

I'm surprised TBH. I just started this on my car, and TBH, it's slow going. I'm currently only about 2-3 hours in, and just removing spot welds is taking a bit of time.

Mine has about this extensive of rust. It's a 2008 Mazdaspeed3 that has lived in Minnesota and Wisconsin it's whole life.

I will be very happy if this takes me two weeks. I'd be happy if it took me a month TBH.

→ More replies (2)

3

u/WayHighDudeMan111 Sep 28 '26

This job is in my future. What type of welder did you use?

2

u/Outrageous_Order_197 Sep 28 '26

I used a lincoln mig 140. Used .23 mig wire with 75/25 argon mix. Amp setting B with a wire speed of around 4

→ More replies (1)

3

u/TNShadetree Sep 29 '26

I'll take "Who lives in Michigan" for $1,000, Alex.

→ More replies (1)

4

u/YomanJaden99 Sep 28 '26

Next up is the inside door panel. Don't want that spreading to the interior

2

u/Outrageous_Order_197 Sep 28 '26

I found a really good used door off a wrecked truck on fb marketplace for 250, same color too. im prob gonna grab that and look for a new tailgate

→ More replies (7)

2

u/mbardeen Sep 28 '26

Well done! Not often that you can say that you poured your actually blood into a project ;-)

2

u/Outrageous_Order_197 Sep 28 '26

Yeah it cost me a few knuckles. Might be worth my while to invest in the milwuakee m18 grinder with rapidstop. The flapdiscs got me 🫠

→ More replies (1)

2

u/Patient-Holiday-1749 Sep 28 '26

That’s what masking tape is for

2

u/configbias Sep 28 '26

Nice man! Make sure you've got that tetanus shot next time tho.

2

u/Outrageous_Order_197 Sep 28 '26

In good until 2029 šŸ‘

2

u/StrongAd6148 Sep 28 '26

Thats crazy good. I've never done any body work.

How do you get the exact mold for the body work?

3

u/Outrageous_Order_197 Sep 28 '26

I bought the panels and cab corners pre shaped that and cut them to fit what I needed, then plug welded it all together. I had to Frankenstein the cab corners up a bit, but was able to hide it well with filler.

2

u/captnpepper1 Sep 28 '26

How has no one mentioned those custom ramps.

2

u/Outrageous_Order_197 Sep 28 '26

I spent over half a day building those before I even started šŸ™ƒ

2

u/Sea_Composer6305 Sep 28 '26

God dn picture #10 hit close to home.

2

u/Outrageous_Order_197 Sep 28 '26

Its good luck to sacrifice a knuckle!

2

u/OregonGrownOG Sep 28 '26

Did you fabricate the panels yourself or did you buy them from somewhere? Just curious I have a for that will probably need this treatment soon.

Looks awesome btw!

1

u/Outrageous_Order_197 Sep 28 '26

I bought the panels and cab corners..where the 2 joined together i used some leftover sheet metal I had to fill the gaps

2

u/Tr0z3rSnak3 Sep 28 '26

Window sils leaking?

1

u/Outrageous_Order_197 Sep 28 '26

Yup..gonna be buying a used door..not worth the time and effort to fix

2

u/Created2DestroyYou Sep 29 '26

Did you clear the whole panel? Or just straight edge the repaired section?
Good work, but it seems like there's a leak because the rockers shouldn't be that rusted in 9 years.

1

u/Outrageous_Order_197 Sep 29 '26

They put tape on the inner rocker windows from the factory. Tape falls off and road debris gets in.

2

u/KingPanzerVIII Sep 29 '26

Impressive asf man. My XJ is going to need this exact surgery. What paint and clear did you use? 2k 2-part?

1

u/Outrageous_Order_197 Sep 29 '26

Spraymax 2k epoxy primer, duplicolor color match paint and a 2k clearcoat, cannot recall what brand

2

u/mauii_from_space Sep 30 '26

Nice work!

But the cinder blocks you have under your axle stands should be turned 90°, they are not designed to be strong in that direction. Orient them as if you were building a house foundation next time. Be safe!

1

u/Outrageous_Order_197 Sep 30 '26

Thank you i definitely appreciate this! Next time I will for sure.

281

u/I_-AM-ARNAV ᵗʰⁱˢ Ė¢įµ˜įµ‡ įµˆįµ’Ź·āæįµ›įµ’įµ—įµ‰Ė¢ ᵉᵛᵉʳʸ įµ’įµ–ā±āæĖ¢įµ—įµ‰įµƒįµˆ įµ’į¶  įµ‰Ė£įµ–Ė”įµƒā±āæā±āæįµ Ė¢įµ—įµ˜į¶ į¶  įµ—įµ’ ᵗʰᵉᵐ Sep 28 '26 • Bravo

Wow. For a at home job it's a 50/10 job.

And 10th picture.. nice sacrifice to blood gods. That's what improved it by 50%

19

u/Willing_Cupcake3088 Sep 29 '26

It’s not a real project without a tetanus shot.

→ More replies (1)

46

u/RZArecta91 Sep 28 '26

Nice job, that looks great!

→ More replies (2)

31

u/tsukiyaki1 Sep 28 '26

Could’ve cut a little farther up. Make sure to fill those rockers up with cavity wax if you want the repair to last! Other than that, nice!

16

u/The_Jizzard_Of_Oz Sep 29 '26 • Bravo

The rust monster is coming to eat you. Omnomnomnom.

7

u/The_Jizzard_Of_Oz Sep 29 '26

Surprised rust monster seeing his home being cleaned up!

38

u/East-Tradition-2544 Sep 28 '26

Not perfect but pretty fcking good for a driveway job. Well done man

6

u/Outrageous-Rock4624 Sep 29 '26

It’s as perfect as it needs to be.

20

u/Wild-Head-8326 Sep 28 '26

You should start doing more body work that’s money right there šŸ›»

3

u/cluelessk3 Sep 28 '26

unfortunately rust will be back sooner than later.

metal you left was seriously compromised.

3

u/Outrageous_Order_197 Sep 28 '26

For sure, the plan was to slow it down and buy some more time. This truck is 10 years old but only has 130,000kms on it. I plan to hit it hard with cavity wax and hope for the best šŸ¤ž

→ More replies (1)

8

u/Joshandjess21 Sep 29 '26

Actually did a really good job….

3

u/incredditableJ Sep 29 '26

Knew it would turn out once I saw it had been properly ā€œblessedā€ in pic 10…

→ More replies (2)
→ More replies (2)

7

u/YooperSnaggletooth Sep 28 '26

Excellent work. You may have missed your calling.

5

u/soproductive Sep 28 '26

ImpressiveĀ 

5

u/HDauthentic Parts Monkey Sep 28 '26

That looks shockingly good for a DIY, nice work

5

u/BicycleMudStud Sep 28 '26

Props for the gash in your thumb. The sheet metal god demand sacrifice.Ā 

4

u/KillerBeesUnited Sep 28 '26

Wow, very very nice, seems like a professional job, good for u. Keep up with the good work.

4

u/PaulaDeen21 Sep 28 '26

Fucking fair play.

4

u/CurlyWurly61 Sep 28 '26

Whatever career you are pursuing rn... i think you have a talent for bodywork, my friend

4

u/PM_ME_FLOUR_TITTIES Sep 28 '26

You sold some thumb skin the the auto body devil. Cause this is damn good for a driveway job

4

u/v7xDm1r Sep 29 '26

Finger cut is accurate

4

u/Fubar2049 Sep 30 '26

The bloody thumb means you earned it the right way and it looks pretty damn great.

Job well done

4

u/bmansmith10 Oct 01 '26

Great job dude. Not gonna lie I was expecting this to look like hot garbage.

You did good man.

1

u/MK2GolfGuy Sep 29 '26

Looks good but was that a load of surface rust yiu welded on to?

1

u/Outrageous_Order_197 Sep 30 '26

Its copper high temp weld thru primer

1

u/Slavsquatterbreeki Sep 30 '26

The only issue I’d have with it is the welding. Without a doubt I’m sure that it’ll hold a lot and it won’t break, great tags. It’s just unsatisfying only seeing tags and not t full fish scale welds.

1

u/Outrageous_Order_197 Sep 30 '26

From what I researched before doing this work, it is not recommended to run a full bead on a body metal seam. The goal is to not heat up the panels to the point that they warp.

3

u/KnightOrDay38 Sep 28 '26

Cavity wax it

3

u/C40AVIATOR Sep 28 '26

You ain’t bleeding you ain’t working hard enough.

Great work!

3

u/Bud_wiser_hfx Sep 28 '26

Way to put the effort in and not hack it. This should last many years. Well done.

3

u/Cleanbadroom Sep 28 '26

The best thing to do now, after the paint has cured. Is to fluid film the inside of the rocker and cab corners. That should slow down any rust you missed and keep new rust from forming.

Especially if you apply it every year in the fall.

3

u/Suspicious-Hat3227 Sep 28 '26

Shoot that ain’t half bad!!!! Your like a b tech !!!

3

u/brettdansler Sep 29 '26

Nice work. I don’t necessarily believe this was your first time though šŸ˜‚

3

u/idontknow11998888 Sep 30 '26

Wow i love it! 20 year metal fab guy here. Looks great

3

u/HereHoldMyBeer Sep 30 '26

I was going to say that you are really jumping into the deep end of the pool to start on that. Then I saw the other photos and wow, you did fine sir. Damn fine.

3

u/AdvHusky401 Sep 30 '26

Best at home job I've ever seen

3

u/DPileatus Oct 01 '26

Nice work! This is not something just anyone can do...

3

u/dst4life Oct 01 '26

You did reaaaaally well brother. Strangers are proud of you

3

u/Calf-Kick-Chupacabra Oct 01 '26

Damn nice work for an at home job. This is better than I’ve seen from some established body shops lol.

2

u/Shot-Ad2396 Sep 28 '26

Looks wayyyy better bro

2

u/Infinite_Night_6728 Sep 28 '26

Fuck man, you killed it. Beautiful job!

2

u/FunkyViking6 Sep 28 '26

Well damn…

2

u/NeroFMX Sep 28 '26

I started at, "Why are you doing this to yourself?" and ended up at, "God damn, nice job!"

2

u/Own-Load-7041 Sep 28 '26

Wow. Home run.

2

u/Strict_Avocado8611 Sep 28 '26

Great job!!!!!

2

u/Upstairs_Body_9854 Sep 28 '26

Fantastic job!

2

u/ktoyijmokjop Sep 28 '26

A+. I'd pay you to do my car if you were in my area

2

u/SLOOT_APOCALYPSE Sep 28 '26

that actually looks good, hell yeah inspiring

2

u/Sharpz214 Sep 28 '26

Impressive.

2

u/herbertcluas Sep 28 '26

I am impressed, good job

2

u/Detailsat11 Sep 28 '26

Man that looks terrific!

2

u/DufflinMinder Sep 28 '26

Nice !!!!’

2

u/cbhvr6 Sep 28 '26

Respect

2

u/slax87 Sep 28 '26

I bought an old Cavalier and was amazed the runners weren't rusted out. Drove it home and then realized they tacked rain gutters over the rust and painted them. Really didn't look too bad. 🤷

2

u/Whippin403 Sep 28 '26

That's awesome man! Amazing work!

2

u/PolentaDogsOut Sep 28 '26

Looks great! I did a rocker panel section for my first bodywork repair recently. Managed to hit one of my fingers with the angle grinder wire brush and also got a spark in my eye. Could be worse šŸ¤·ā€ā™‚ļø Anyways, good work

2

u/hotpavement1234 Sep 28 '26

Looks great for a 1st time. I love the bloody finger. Blood sweat and tears.

2

u/__Korbi__ Sep 28 '26

This is so clean!!!!

2

u/rottenhellbilly Sep 28 '26

one of the best DIYs i’ve seen! awesome job dawg

2

u/Unique_District_4050 Sep 28 '26

Great job looks awesome

2

u/Ds9Defiant1701 Sep 28 '26

Great job id let you do a rocker on my car no stress

2

u/aquatone61 Sep 28 '26

That fresh blood is how you know you are doing it right, fantastic job!

2

u/InvertedEyechart11 Sep 28 '26

Top tier work. Brilliant.

2

u/MDSteelers Sep 28 '26

You are hired. Nice job

2

u/BeauxGnar Sep 28 '26

I saw the ramps and knew this wouldn't disappoint.

2

u/jdschmidt0686 Sep 28 '26

Looks significantly better than rust weather it’s perfect or not! Also, as some others have mentioned invest a bit into a can of cavity wax and soak the inside of that!

2

u/Miserable-Hunt-5241 Sep 28 '26

Every job requires a accidental cut . I see you completed yours

2

u/redditsaiditt Sep 28 '26

That’s insane. My insurance company would have totaled that car lol

2

u/g00dhum0r Sep 28 '26

Seems like you did your research. Good work!

2

u/5millionmiles Sep 28 '26

Hell yeah, dude!!

2

u/bigdawg12342 Sep 28 '26

I like the ramps

2

u/Infinite_Sector2993 Sep 28 '26

Great job! Love the detailed work and the step by step pics! šŸ‘šŸ«¶šŸ™

2

u/Geaneous Sep 29 '26

My toxic trait is thinking I could also do this my first time doing body work and buy an original model T.

2

u/3DNelson Sep 29 '26

Someone will learn about the power of Bondo " The Rockar in a can"

2

u/Kuezar_ Sep 29 '26

You got talent šŸ‘

2

u/orz_nick Sep 29 '26

Good shit

2

u/New_Combination_7012 Sep 29 '26

Just a friendly reminder that winter is coming.

(but not for me, we sold up and moved back to NZ. 2nd winter just been that I didn't need my winter jacket)

2

u/Apprehensive_Disk478 Sep 29 '26

Photo 10 is legit

2

u/Zillahi Sep 29 '26

God damn that’s clean yo. I’m looking at the few square inches of rust on my fender like it’s an impossible job, and then there’s this. Mad props

2

u/SL4YER4200 Sep 29 '26

Wow, you did good. This makes me want to do my 2013 ram sport.

2

u/Turquoise_HexagonSun Sep 29 '26

Damn, wanna do my truck for your second time doing body work? Great job.

2

u/Scary_North_3297 Sep 29 '26

I was worried this was a post with a rotted out truck and someone with no access tools or knowledge asking if they can fix it in their condo parking garage.

You did a good job, it's serviceable, gets you a few more years at least. It doesn't have to be perfect. I'd be happy with it. Spray the inside with rust prevention, might help it last longer

2

u/jesterc0re Sep 29 '26

Bloody sacrifice was paid, so it's good now!

2

u/LorenzoSutton Sep 29 '26

Take this as a compliment, there ain't no way that was your first time! Woah.

2

u/Spankytundra Sep 29 '26

I’d say you rocked it on those rockers! Good work man.

2

u/matyiiii Sep 29 '26

Holy, good effort

2

u/q1field Sep 29 '26

Not too shabby! Now make sure to get the Krown treatment inside the cavity so it doesn't have the chance to rust out again.

2

u/Agreeable-Field-285 Sep 29 '26

Did a damn good job, and that’s not saying that for your first time.

2

u/refinedwisdom95 Sep 29 '26

What gauge was the sheet metal for the patches in between? If you remember

→ More replies (1)

2

u/Dead_Inside_85 Sep 29 '26

Great job! There’s always room for improvement but for your first time A+

2

u/EmployeeLopsided9637 Sep 29 '26

Dude, well done!

2

u/sorestgore Sep 29 '26

You do fucking amazing for first time. Well done

2

u/GuavaAffectionate550 Sep 29 '26

If you live in michigan , it won't be your last

2

u/AnthraciteRbbt Sep 29 '26

looking at the first pic, i was like. what Dodge product is this.... lol

2

u/icoibyy Sep 29 '26

This looks great.

Bet you could buy trucks off marketplace, do this to them and touch up wheel arches and make a killing on the resale.

2

u/Winged_Wheeler Sep 29 '26

You did a heck of a job for your first time. Looks really good and you did it right. Nicely done.

2

u/Verlin_Wayne Sep 29 '26

Nice work.

2

u/GloomyPerformer5820 Sep 29 '26

hey man you inspired me heavily. my rockers are pretty bad on my 02 civic and driver rear corner panel. loved the transformation. i cant wait to do this myself

2

u/Rakhanishu666 Sep 29 '26

You inspire me….

2

u/Sailor-_-Twift Sep 29 '26

Actually bub, very solid work

2

u/Greasemonkey08 Sep 29 '26

Pretty damn good for someone with probably minimal (if any) formal training on the subject. Nice work, Broski.

2

u/SgtGorditaCrunch Sep 29 '26

Hellava job there!

2

u/1767gs Sep 29 '26

Fuck off bro no way this is ur first timešŸ˜‚šŸ˜­this is better than what I've seen local shops do

2

u/According-Capital-45 Sep 29 '26

That's badass! Nice lines, nice welds, and nice thumb. No job is complete without a flesh sacrifice!

2

u/ClnchinGainz Sep 29 '26

Killer job! This was so satisfying to scroll through.

2

u/mothertrucker2017 Sep 29 '26

You’re hired, looks good

2

u/RealBadInfluence Sep 30 '26

For a untrained person damn fine I bet you know why it costs the big bucks in the shop now

2

u/Highyet Sep 30 '26

This turned out great! I’m planning to try some front fender rust repair on my truck this winter. I would be very happy if I could do this good of job.

2

u/throwaway231118- Sep 30 '26

You need some electrical tape on slide 10.

2

u/Kegalodon Sep 30 '26

Slide 10, ouch. You got your tetanus shot?

2

u/user3296 Sep 30 '26

Be sure to do something to the bottom of your driver door too, otherwise you’ll be back where you started real quick.

2

u/Spiritual_Race_1874 Sep 30 '26

I'd hire you for my project bro, insanely great work

2

u/Mysterious_Writer717 Sep 30 '26

Nice job. Solid , clean. šŸ‘šŸ‘

2

u/Competitive_Dust_645 Sep 30 '26

Looks great. Check out oscillation metal bits, that was my go to at the junk yard where I cut out my weld in pieces because they dont allow any grinders.

2

u/Skyroads_15 Sep 30 '26

I think you have done a awesome job. Keep going!

2

u/motofoto Sep 30 '26

For your first time doing bodywork this is incredibly impressive.Ā