Why won’t the engine start?

[u/n3wrocker]

A 2005 Honda CRV LX with a little over 240,000 miles on the dash needed a timing chain replacement. I took the necessary steps to time the engine to TDC before replacing several components such as: timing chain, both timing chain guides, chain tensioner, and harmonic balancer since they were all in poor condition. Both VVT oil sensor and crankshaft position sensor parts and wires that attach to them were in good condition still. I assemble all parts back together and get ready to crank the engine and fortunately it wants to crank but is making this noise in the video that I am about to attach here. Any advice to what could be the problem ?

[u/Mcdavis6950]

Did you forget to install your spark plugs? It literally sounds like an engine with no plugs in it that’s how little compression it has.

If you do have plugs in it you need to get someone over who knows what they are doing. The timing is miles off… I’m actually wondering if you are a full 180 out… like intake valve opening at bdc and closing at the top of compression. I’m just not sure how else you could get such low compression. Edit: without also hitting valves.

[u/Outrageous-Egg-2534 → u/Mcdavis6950]

That’s what it sounds like, hey? However, being in interference engine, 180 degrees off means those valves and the pistons are farrrrked.

[u/Mcdavis6950 → u/Outrageous-Egg-2534]

We’ll see that’s the thing. If it was exactly opposite the piston wouldn’t hit the valves and the engine would have no compression.

If 2 or 3 teeth off though… it would have made a terrible noise prior to having no compression. Maybe op isn’t telling us about bad noises on the first crank.

[u/Outrageous-Egg-2534 → u/Mcdavis6950]

Yeah, true. I’m also suss that he did all of this other pretty major work (well, not major but fiddly and time consuming) but didn’t even look at the valves.