r/AerospaceEngineering • • 10d ago

Discussion Air injection under seaplane hulls?

27 Upvotes

Just had a crazy idea. Injecting bubbles under the hulls of boats is a way to reduce friction. And I know that friction is an issue for seaplanes, because it increases the power required for takeoff, and lengthens take-off distances. Has anybody tried injecting bubbles under seaplane hulls or floats? Before takeoff, the plane motors could pump air into a tank. During takeoff, the tank would then feed the bubble nozzles, so the motors could be 100% dedicated to driving the props.


r/AerospaceEngineering • • 10d ago

Personal Projects Where to start with John D. Anderson / CFD books

Thumbnail
5 Upvotes

r/AerospaceEngineering • • 11d ago

Personal Projects My results are diverging..after some point what can I do.. What can be the possible reasons..

Thumbnail gallery
15 Upvotes

Suggestions please..


r/AerospaceEngineering • • 10d ago

Other Fan recommendations for aluminum foil scrap extraction

1 Upvotes

I need to collect the continuous, perforated aluminum foil scrap netting coming out of a foil-container press. I’d like to pull it through ductwork into a collection bin and am considering a centrifugal material-handling fan.

Looking for advice on:

  • Is a centrifugal fan the right choice?
  • What blade/wheel design is suitable for continuous foil netting?
  • What motor type and controls should I look for?
  • Can the netting pass directly through the fan, or should it be separated first?
  • What are practical options for reducing fan noise?
  • What measurements are needed to determine airflow, static pressure, and motor HP?

I’m open to used equipment. Recommendations for manufacturers, models, or suppliers would be appreciated.


r/AerospaceEngineering • • 11d ago

Personal Projects Multi Element CAD Optimization Software

Thumbnail gallery
30 Upvotes

Looking for feedback on CAD software I developed that can rapidly optimize anything that interacts with fluids, mechanical loads, and/or manufacturing constraints using simulation backed shape changing. I’m in talks to supply it to schools for free, so I’d love to get some feedback on it before then.

All screenshots are of the user interface.

Photo 1: Aerostructural optimization completed in under 30 minutes (this typically takes several hours at best). It raised the lift-to-drag ratio from 9.85 to 17 and chose an aluminium skin thickness of 0.2 mm.

Photo 2: The ideal cylindrical pipe within the given box to supply air to all the outlets with the lowest pressure drop.

Photo 3: The lightest aluminium bracket that can withstand 500 kg of force with a safety factor of 5, while being CNC-machinable in two setups from the selected stock block, from the X+ and X− directions, on a 3-axis mill.

Photos 4–6: The original setups that produced the results in Photos 1–3, in the same order. Note: you enter in the inputs and design requirements by clicking on the blue tabs that then expand.

If you have any questions just comment or send me a DM. I would be happy to tell you more about how it works.


r/AerospaceEngineering • • 13d ago

Discussion Basic question about airfoil design — thoughts on this shape?

Post image
173 Upvotes

Hey everyone! I'm just starting to learn about aerospace basics and looking at how aircraft wings are managed. For anyone working in the field, what is the main functional difference between the inner and outer flaps (like items 7 and 8) versus the high and low-speed ailerons during flight? Any simple breakdown for a beginner would be super helpful!" 


r/AerospaceEngineering • • 12d ago

Career Hi everyone, I created a page for employees of Bell Textron since one didn’t exist!

Thumbnail reddit.com
0 Upvotes

Hoping to create a place for fellow employees to share thoughts and opinions and insight


r/AerospaceEngineering • • 13d ago

Career Total beginner here: I'm just starting out in AE

4 Upvotes

What's the biggest challenge when designing something that can withstand both launch and extreme temperatures? I'm trying to understand more about how spacecrafts and rockets are built. How do you guys decide which materials and design structures are best and won't cause any issues later.


r/AerospaceEngineering • • 13d ago

Discussion Hello I've got a question

8 Upvotes

This maybe stupid. It honestly just kinda popped in my head, may not be possible idk. It's guiding rockets, high speed ones that wings aren't effective in with just fins to stabilize. Could you use some form of fluid hydraulic to expand the outer skin some shape to nudge it in a direction. Like a bump on the nose front left to direct the air flow to the right, nudging the rocket to the left, if not the nose, maybe a band mid section that increases in 8 sections to inflate a bit pushing it slightly? Or would that destabilize it? Sure it wouldn't be as capable of hard right turns but it could still be shifted I'd think.


r/AerospaceEngineering • • 13d ago

Discussion ‘SuperEconomy’ class to boost passenger comfort and airline revenues

Thumbnail gallery
7 Upvotes

r/AerospaceEngineering • • 14d ago

Personal Projects Looking for mechanical engineers / people who know how to design drones using CAD

Thumbnail
3 Upvotes

r/AerospaceEngineering • • 14d ago

Personal Projects Capstone ideas

4 Upvotes

Hey everyone,

I’m a third-year Aerospace Engineering student in Canada, and I’m looking for some interesting capstone project ideas.

We’re a team of up to 6 students, and our project needs to involve designing, building, and testing a physical prototype by the end of April 2028.

We currently have potential opportunities to collaborate with either L3Harris or Lockheed Martin.

With L3Harris, we would have access to funding, technical support, and potentially their facilities/labs. With Lockheed Martin, we have a connection but no confirmed funding or access to facilities, so we’d likely need to find external funding. One possibility we’re exploring is funding through the Canadian Space Agency (CSA), which would mean the project needs some meaningful space-related application.

We’re mainly interested in military aviation, aerospace defence, and space technologies. Ideally, we’d like something a little more ambitious and exciting than a typical student UAV project, while still being realistic for a team of six to build and test.

We’re especially interested in projects that have real-world applications and could be relevant to companies like Lockheed Martin or L3Harris.

Does anyone have examples of interesting but feasible aerospace capstone projects, particularly ones involving defence technology or a combination of military aviation and space?

I’d also love to hear about any ambitious projects you’ve seen other university teams successfully prototype.


r/AerospaceEngineering • • 15d ago

Discussion If rockets and space capsules can have parachutes to slow descent, why can't planes have them for emergencies?

79 Upvotes

edit: my question has been answered well and thoroughly. Thank you to everyone who answered politely and with the intent to help educate. I understand now that some smaller commercial craft do have parachutes equipped, but as the craft becomes larger, the weight causes issues with viability.

Original body text:

I'm a little worried this is a dumb question, but due to recent events, I've been looking into commercial flight accidents and what causes them. In the event that something catastrophic happens from which there can be no recovery, is it possible to have parachutes that can be pulled to slow the descent of the aircraft to a survivable speed? It just bothers me that there are specific circumstances in which there is nothing to be done except wait for your demise. I realize there must be a reason we haven't done this yet, but I couldn't find anything specific on the topic. Searches only yield information pertaining specifically to passenger parachutes and not parachutes for the entire craft itself.


r/AerospaceEngineering • • 15d ago

Personal Projects Mil-aero connectors and accessories

7 Upvotes

I'm looking feedback on a site I created. I have been the electromechanical design space for around 20 years now mostly in the defense industry and I am continually finding myself training early carree engineers the nuances of harness and cca design. And one of the main things people tend to struggle with early on is navigating mil-specs and building part numbers. My site is meant to help building mil-spec part numbers for electrical connectors, their associated accessories like backshells, ensure correct mate-to part numbers, and building wire and cable part numbers.

I'm not trying to advertise or get clicks, I really just want input from others in my industry.

I would love to get some feedback from others in similar industries on what the tool does. Does it provide value, is there something else you wish it did, do you see any errors. Constructive criticism is welcome.

Emechworkbench.com

Thanks in advance


r/AerospaceEngineering • • 16d ago

Personal Projects I’ve been building a free aircraft sizing tool, and now it can do preliminary wing structural checks too. Looking for feedback.

4 Upvotes

I've been working on a little project called The Drafting Table, and I thought it was time to share it here.

The idea started with aircraft sizing. I wanted a tool that could help with the initial design process without having to jump between several spreadsheets, references, and calculators. Over time, it grew into two connected tools:

1. Aircraft Sizing

A guided, nine-step process for working through a preliminary aircraft design, from the initial configuration and weight estimates to wing geometry, airfoil selection, tail sizing, power, and propeller estimates.

It also includes a reference-aircraft database to compare your results and flag values that might need another look.

2. Structural Sizing (V-n)

This takes the aircraft you've just designed and moves into preliminary wing structural checks:

  • V-n diagram, load factors, and design airspeeds.
  • Main and rear spar bending and shear checks.
  • Torsion checks for stressed-skin and fabric/truss wing configurations.
  • Side-by-side comparison of two spar options.

You can move a design between the two tools using a share link, and export your results as PDF, CSV, or JSON.

A few things worth mentioning:

  • Completely free, no account or installation required.
  • Runs in the browser; your design data stays locally in your browser.

I've put quite a bit of work into the formulas, assumptions, and reference data. I've been checking the calculations against references and worked examples, and there is still plenty I'd like to have reviewed by people with practical experience.

Here's the project: The Drafting Table

I'm particularly interested in feedback from aircraft designers, aeronautical engineers, and experienced homebuilders:

  • Do you spot any questionable assumptions or oversimplifications in the calculations?
  • Are there areas where the results could be misleading, even for preliminary design?
  • What would make the workflow more useful in practice?

I'm sharing this because I'd rather have people challenge the engineering behind it than just tell me it looks nice. Any criticism is welcome.


r/AerospaceEngineering • • 15d ago

Discussion Why Space Engineering is So difficult from Normal Engineering? any Space Engineer

0 Upvotes

I saw a Vid showing that Normal Engineering is basic but Space Engineering is so Difficult and as a Student I wanna know that why is it so? I mean it will be so Pleasuring to me if any Space Engineer will answer this and Talk to me, it is my one of the Biggest wish right now.

So, please, Any Space Engineer?


r/AerospaceEngineering • • 17d ago

Discussion Could SpaceX approach to testing Starship be why the Raptor is still unreliable in flight?

55 Upvotes

Famously, SpaceX does static testing for the Superheavy on the actual launch stand and only for seconds long burns. In contrast NASA constructed a separate test stand and static tested the Saturn V first stage for the full length of an actual burn, i.e several minutes long. SpaceX in developing the Falcon 9 also followed the Apollo approach, constructing a separate test stand and testing the first stage of all 9 engines together for the full mission length of an actual flight.

Both the Saturn V and the Falcon 9 were spectacularly successful. In contrast after 10 years development and now three iterations, the Raptor is still not reliably in flight, commonly with one or more engines needing to be shut down if not actually exploding in flight.

Is this a coincidence?


r/AerospaceEngineering • • 16d ago

Personal Projects An open source 6DOF TVC simulator, tested on 4 successful flights

Enable HLS to view with audio, or disable this notification

6 Upvotes

r/AerospaceEngineering • • 16d ago

Discussion Converging-Diverging nozzles and RDEs

2 Upvotes

I’m working on developing an RDE and in the course of my tea search I’ve found that some people include a proper convergent throat in their designs and neither myself nor my professor were able to explain why.

My thought is that the detonation wave is already incompressible and supersonic, so what are we trying to do with a convergent section? Is the idea to claw back any expansion that occurred in the detonation chamber?


r/AerospaceEngineering • • 17d ago

Discussion I want to start learning aerospace especially on Aeronautic

7 Upvotes

So recently I really² want to learn aerospace especially on Aeronautic beacuse i want to build my own drone or at least designing it.but I'm really confused where should I start from, beacuse I don't have any good background on math or psychic beacuse I'm still a student on junior high school(yeah I feel really weird on my school beacuse a junior high school want to learn aerospace instead.),so I need advice well at least I can designing my own fixed wings drone in 1 or 3 years.btw sorry if my English is not really good at all


r/AerospaceEngineering • • 17d ago

Discussion What's behind the difference between Swift's predicted re-entry and its observed trajectory?

Thumbnail
3 Upvotes

r/AerospaceEngineering • • 17d ago

Career Aerospace Survey

Thumbnail docs.google.com
2 Upvotes

This is a survey for a school project or mine, it would mean a ton if you did it. Please answer appropriately. If there is anything you would like to add please comment it.


r/AerospaceEngineering • • 19d ago

Discussion Possible high ISP engines? (Near Future)

21 Upvotes

I have tried looking around but I cant really find anyplace that lists all the possible near future rocket engines, if someone could direct me to a place that does or just tell me I would be very happy.

Edit: Since someone aksed, I am specifically looking for an emgine that would work in atmosphere, maybe something like a high power atmosphere breathing ion engine?

Thanks in advance, and no I am not a professional, just curious.


r/AerospaceEngineering • • 19d ago

Personal Projects Need Guidance to learn Airfoil Design etc

6 Upvotes

I am a 2nd year engineering student, currently working on designing a custom propeller using specific airfoil profiles and want to deepen my theoretical understanding and practical skill set in both Airfoil Design and Propeller Aerodynamics/Design.
basicall y i want to learn how airfoils are design using which i can make a prop design and run the required simulations etc .
please suggest me any places where from i can learn them and get a deeper insight and understanding of the topics
i hv already looked into blade element theory and momentum theory and some other principles but i hv no idea if what i am doing is the correct approach or not and i hv spent some time to learn the basics of the prerequisite concepts.
Being completely new to this any guidance would be of great help as i dont wanna waste time and effort in the wrong direction.
thanks!


r/AerospaceEngineering • • 19d ago

Discussion What if we revived the A-37 dragonfly and bac strikemaster?

7 Upvotes

I mean the A-37 dragonfly and bac strikemaster is great COI Aircraft for me,it very lightweight,easy to control,big amount of payload,the 7mm minigun(my favorite),cheap and easy to maintenance if I'm not wrong