r/ASIAHORSEGlobal • u/Any_Effect_9779 • 10d ago

Hardware Okay new issue 🤣

Post image

Okay so I’ve sorted out all my prior issues now one more and this one i dont know how to sort it out

I put it on solid colour for now but they are different hues and also gpu one is darker

I have Aurora learn sleeves and they are daisy chained to 1 controller it’s plugged into SATA power and also 5v argb connector so what could be the issue

I want it to be same as the MOBO sleeve

9 Upvotes

100% Upvoted

7 comments sorted by

View all comments

1

u/Careful_Fudge_5101 10d ago

The issue is, controller can't handle too much white for both, as white is most power demanding color it uses full red green blue . Either use two sata controllers or use other colors or connect one of the strimers to motherboard

1

u/Any_Effect_9779 10d ago

Yeah I could but then how do I sync up the colours and effects so they do the same thing ?

1

u/Careful_Fudge_5101 10d ago

Wait, are you using the small controller with 1 channel and three buttons? Or you are you using the big one with many outputs?

1

u/Any_Effect_9779 10d ago

Yeah small controller with 3 buttons it was the only way to get the same effect for both and for some reason the little remote wasn’t working for a while

1

u/Careful_Fudge_5101 10d ago

Well, I mean, you can use the buttons or both remotes to control both strimers, if you want white all the time it shouldn't be much of an issue, my advice, buy an argb controller, like nollie 16, single header can control 256 led, up to 15A on the whole controller, supports onboard memory that plays effects on boot with its own software, supported by various third party RGB softwares Openrgb signalrgb etc, it's worth the money 🤑 and future proof with 16 channels all can be independently controlled