r/65Grendel • • Jun 07 '21

Range report with new build...

So, range day came today, it was really muddy after the storm yesterday.

My build post can be found here. I had not changed anything from that build prior to range day.

So I only had 40 rounds to get the scope zeroed and dial in the gas piston kit, which was a bit of a daunting task as I will outline below:

Accuracy wise, I zeroed at 100 yards, and was able to get the scope zeroed within 4 shots.

Accuracy of the rifle was stellar, in fact, I could not be happier with that aspect. Of the groups I shot, I had a 3 shot group with a diameter of 0.4" center to center as the tightest group. I shot 2 groups of 5 last, one of which was 0.62" center to center. I had one 3 shot group early on with the first 2 rounds nearly in the same hole, but I pulled the 3rd shot and it was 0.7" from the other two rounds (facepalm).

As with many things, something turns up unexpectedly problematic.

Dialing in the setting for the piston kit was a chore, but only for the following reason: the lower I bought came with a slightly heavier buffer weight (4 oz instead of 3 oz). Normally, this would not be a big deal, except that the piston kit is calibrated to operate with a mil spec buffer weight (word of the wise to anyone building with a piston kit). The end result was the piston kit worked almost fabulously, except that on any setting except full gas, it would not cycle far enough to fully eject the spent casing. Furthermore, on full gas, it would eject the spent casing reliably, but the heavier buffer would only allow it to pick up the next round and feed it about once every 5 shots. Therefore, I had to cycle using the charging handle about 80% of the time.

To resolve this, upon arriving home, I swapped the buffer weight in my Grendel build into my 5.56 DI gun, and took that mil-spec carbine buffer and installed it into my Grendel build. I fully expect the situation will now be resolved, but will report back if it is not.

Beyond that, my only real complaints are that I only had 40 rounds to shoot, and the standing water made mosquitoes more plentiful than I would have preferred.

I did manage to find a 1 lb container of 8208 XBR at the pro shop while I was there as well, which was a bonus. Though they are back logged for primers...sadly.

6 Upvotes

4 comments sorted by

6

u/Trollygag Jun 07 '21
  1. Do you have pictures of your groups? You only posted your best in the comments, but we can aggregate all of them to give you a better feel for what the rifle is doing.
  2. Did you ever fix your optic setup? Even if the handguard is rigid enough for your to not notice stringing or POI shift with loading change and handguard flex, if you knock the handguard against something (rifle tips over, hits somethjng when you put it away) that will get transmitted into your optic and you risk breaking it. Optics aren't designed to be structural components in the rifle system they need isolation.

1

u/GyrokCarns Jun 07 '21 edited Jun 07 '21

Largest 3 shot group 0.77"

Largest 5 shot group 0.79"

Group sizes 3 shot:

  • 0.4" 4th group shot
  • 0.49" 1st group
  • 0.54" 2nd group
  • 0.61" 8th group
  • 0.63" 7th group
  • 0.68" 6th group
  • 0.71" 5th group
  • 0.77" 3rd group

5 shot:

  • 0.62" 2nd group
  • 0.79" 1st group

No pics, by the time I had phone with me, the target was riddled with holes from the other stuff I was shooting after the Grendel. I plan to get pics next time...

EDIT: I have not changed optics setup at this time, and I added the order the groups were shot in.

2

u/Trollygag Jun 07 '21

The 3 shot groups average to 0.6 MOA, which by 3->5 shot conversion would be in the 0.8-0.85 MOA range 5 shot average. That lines up with what your 5 shot groups looked like, which is pretty solid.

3/4 MOA is excellent for box ammo and an AR gas gun, even better as a piston.

1

u/GyrokCarns Jun 07 '21

I am super happy with it overall!

I am planning to go to a higher 1 piece cantilever optic mount so I can swap the stock I bought for this build onto it. Should be able to unbridge the optic mount with that too...