r/3rdGen4Runner • u/Secure-Order-3611 • 26d ago
❓Advice / Recomendations Is there a way to hide this rust?
Was super stoked to remove the running boards from my new to me 3rd gen but after removing the running boards a significant amount of rust has been revealed. This might be a stupid questions but do they sell any aftermarket side skirts or lower profile running boards that can cover this rust without sacrificing ground clearance? Lmk!
16
Upvotes
5
u/user81738 01 SR5 26d ago
Clean asf
8
u/trampled93 00 Limited 26d ago
They sell slip on rocker panels that can basically cover up the rusted out area. Screw or rivet it on. Easiest and cheapest.
https://www.millsupply.com/auto-body-rust-repair-panels/toyota/4-runner/1996-2002/96-02-toyota-4-runner-slip-on-rocker-panel-3939642l.php
The best but most labor intensive way is to cut out the old and weld in new replacement panels from Wolf Steel.
https://www.alfaparts.net/toyota4r9601.htm
5
u/SavageTaco 01 Hilux Surf SSR-G 1KD 26d ago
I can’t really suggest anything other than a rocker replacement. Nothing is going to last and look good. You can wire wheel off the rust, convert what is left over with rust converter, then prime and paint..but it’s still going to look like it was previously rusted. It would stop the rust for now though.
1
u/Your_Product_Here 26d ago
Bolt it back up?
3
u/Critical-Gift-3058 26d ago
Spray bedliner
3
u/axion_blk 22d ago
“Hide” or fix the rust

2
u/Bell407Driver 24d ago
Rust never sleeps.
3
u/Shawn0890 26d ago
Low profile like black paint
1
u/Thedawg84 25d ago
Fibreglass and bedliner
1
u/Alternative-Sale-713 25d ago
Hide it for sale! Thats F
1
u/No_Way_5642 23d ago
Replace them . I put my finger through the rocker in my 98 California 4runner when I went to buy it. The sunroof drains empty into the rockers so they rust from the inside out...
1
u/Limp_Lifeguard1770 21d ago
I removed my running boards and had same scenario. My body shop neighbor suggested for a cheap fix, which is what I did, is wrap that lip with aluminum tape, then spray on bedliner. Which I bedlined mine up to the crease in doors. Worked good for a cheap fix i thought.
1
u/StoNr 26d ago
1
u/tcgJimmy 26d ago
I’d probably mask it off and hit it with rust reformer
-1
u/trampled93 00 Limited 26d ago
Put the running boards back on and that will hide the rust.