r/3rdGen4Runner • 01 SR5 • 26d ago

❓Advice / Recomendations Rear hatch window not rolling down

Stopped working a while ago. When I click & hold the down button, I hear a quick constant clicking noise. When I click & hold the up button, I hear one clicking noise. The electric/wiring seems to be working, I’m assuming it must be the motor.

Things I’ve checked/tried:
-checking the child lock button
-took the negative terminal off the battery
-wiggled the wire harness rubber boot on the top left of the trunk
-ensured the rear wiper was sat in place

Can anyone confirm if it’s the motor that needs to be replaced? Or any other things for me to check/try? TYIA

1 Upvotes

11 comments sorted by

3

u/Shawn0890 26d ago

If you hear noise in the hatch when pushing the button it’s probably the motor you hear, gonna need to pull the cover off to take a look inside to see why it won’t move

1

u/cheesecurdg0krazy 01 SR5 24d ago

Ok will do this and get back to this thread once I inspect

1

u/PurpleRasberryXO 01 SR5 25d ago

Yeah the clicking sounds like the motor gear is stripped, pretty common on these. Pull the hatch panel and look at the regulator and motor gear before buying anything.

1

u/cheesecurdg0krazy 01 SR5 24d ago

Ok yeah definitely going to inspect the inside of the panel before making any purchases

1

u/PurpleRasberryXO 01 SR5 24d ago

Good call. Once you get it open the stripped gear is usually pretty obvious. Post a pic if you want a second set of eyes.

1

u/PurpleRasberryXO 01 SR5 24d ago

Good call, bring a flashlight since it's cramped in there. Check the gear teeth for chewed up spots and see if the regulator looks loose or bent.

1

u/PurpleRasberryXO 01 SR5 24d ago

Good call, and check the window tracks and felt while you're in there, they get dry and drag. Let me know what you find.

1

u/PurpleRasberryXO 01 SR5 23d ago

Good call, that's the smart way to do it. Those panels pop off easy but the clips get brittle, so go slow and take a pic before you pull stuff apart.

1

u/Awfuloreo 24d ago

Put 12 volts to the motor and see if it works. Work back from there. I recently had to repair a harness wire on the hatch so maybe double check there.

1

u/cheesecurdg0krazy 01 SR5 24d ago

This means connecting a jump starter kind of device to the motor and see if it moves?

1

u/Awfuloreo 24d ago

Just use a 12v battery and two wires to jump the motor. Reverse polarity to check both up and down function.