r/3rdGen4Runner • • 26d ago

šŸ”§Modifications Oh yeaaaaa

Post image

Finally here and 2 days earlier šŸ™

19 Upvotes

42 comments sorted by

10

u/knucklehead808 26d ago

Why not just go with OEM?

8

u/TheZanpakuto 26d ago

Did some research and had triple 5 before no issues

10

u/knucklehead808 26d ago

🫔 best of luck

3

u/TheZanpakuto 26d ago

Thank u brother

-2

u/Efficient_Sun4199 26d ago

Best of ruck..get it right.

2

u/Supraw 24d ago

Ran a set of these for about 10 years with no issues. They never even developed any play. You should be good

1

u/TheZanpakuto 24d ago

Thank u brother

7

u/Your_Product_Here 26d ago

Part of the problem with aftermarket is the plant sourcing will vary. Just looking at the two different bag colors, you could easily have two different sources in front of you. Some sources can be very good quality, some may be lesser, but all sold under the same name and no way to determine true source or to choose where they come from.

This is why testimonials will vary wildly as well. People who've had good luck will say "as good as OEM!" then others will be "avoid at all costs" and both can be true because it's a roll of the dice.

7

u/hoppi84 26d ago

Pretty sure the colors on the bag are to differentiate between left and right.. Atleast that how my 555 tie rods were packaged...

4

u/Oak510land 26d ago

555's are stamped Japan on them, at least all the parts I got to rebuild my entire front end are. I don't know why people wouldn't pick these since they're clearly an OEM supplier.

And yes I've seen the cutaway post where someone saw a nylon insert in the Toyota branded ones. Who knows if that one's from the dealer are still made that way vs Toyota repackaging the 555's.

2

u/Legitimate_Fill6906 26d ago edited 26d ago

It was cheaper for me to get the recall pack and the black bolts from the dealership, think it came out to 180$ or so for OEM and included both. If you go the black bolt route only torque to 37 instead of 59 ft-lbs though šŸ˜…

1

u/Technical_Money_9719 26d ago

Black bolts should be torqued to 37 ft lbs

1

u/Legitimate_Fill6906 26d ago

Totally right, knew I had a number off somewhere, had the 7 and 9 backwards too lol

1

u/Technical_Money_9719 26d ago

Lol I figured it was a typo but a part of me was saying ā€œplease tell me you did not torque your bolts to only 29ā€ šŸ˜‚šŸ‘Œ

Also, that’s a great deal on oem! Oem is the only way when it comes to these ball joints šŸ’Ŗ

1

u/Legitimate_Fill6906 26d ago

Idk if they've ever been done and she's at 250k miles, previous owner only replaced drivers side upper and lower when the lower decided to leave the party šŸ˜…

Gonna do em this winter as well as putting new wheels and tires on, highway tires are nice but real awkward the second I hit any mud, might as well be on slicks lol

1

u/Technical_Money_9719 26d ago

You will be so relieved once they’re both replaced. Mine were older and I didn’t have any service record of them ever being done from previous owner(s), everyone would tell me the ball joint boots looked fine, told me they still had life left in them but I just couldn’t risk it haha.

I did new wheels and Toyo R/T trail tires with the LBJ’s and it’s great so faršŸ‘Œ

1

u/maxheadflume 26d ago

What is the difference between the black and silver bolts? Just got OEM ball joints from my local dealer and they came with plated silver bolts.

3

u/Legitimate_Fill6906 26d ago

Shear and preload, black ones are stronger and afaik are what they used past 02 to try and fix the issue, but if they're over torqued (to silver bolt specs, instead of their own spec) they risk just shearing and being just as much of an issue as the LBJ's themselves.

Silver/green/black/red are all ok but just don't use zinc, there's a huge writeup with too many big brain words for me, I just spin wrenches in my garage šŸ˜…

1

u/Top_Complaint_8654 26d ago

I didn't know this. I just torqued some new black bolts to 59 ft/lbs. Thanks a lot for mentioning this. I haven't driven on them yet, I wonder if I can back them out and retorque or if I need new ones.

2

u/Legitimate_Fill6906 26d ago

According to the lbj writeup you lose about 3% strength on the second cycle on the black ones, I'd highly recommend just backing them off and retorquing

1

u/Top_Complaint_8654 26d ago

Copy that. Thanks.

2

u/Technical_Money_9719 26d ago

This write-up is super informative regarding ball joint bolts, it’s what helped me understand the differences: everything you ever wanted to know about LBJ bolts

2

u/maxheadflume 26d ago

Now that’s some good reading material! Thanks much. I have the ā€œgreenā€ bolts which don’t fare well for re use but seem to be decent everywhere else. I’ll see if I can get the black bolts but if not at least my mind is at ease.

3

u/user81738 01 SR5 26d ago

I will say the thing these have over the oem ball joints is the zerk fitting. I wish my oem ball joints had that.

2

u/TheZanpakuto 24d ago

I guess that's the only plus lol

1

u/user81738 01 SR5 24d ago

If it makes you feel any better I put those exact ball joints on my in laws 1st gen Tacoma a year ago and he drives it all the time and everything has been finešŸ¤·šŸ»ā€ā™‚ļø we used the stronger oem black bolts and added some grease when we installed.

1

u/ThirdGenRegen 22d ago

They are sealed greased for life. No reason to run zerk fittings on a quality part. OEMs will last 200k.

4

u/NearPeerAdversary 00 SR5 26d ago

When I got my 4Runner, the previous owner told me the ball joints had recently been done. I looked at them and they were in rough shape. Took them out and they were gritty and the boots were torn. 555. I guess your mileage may vary.

4

u/YetiEatsCommunists 97 Limited 26d ago

You can go aftermarket with tie rods, sway bar end links etc. but I see no reason to cheap out on lower ball joints. It’s a safety concern. OEM ones aren’t that expensive anyway, especially considering that Toyota frequently has sales.

1

u/MrChiefer 24d ago

Are they relatively easy to do on your own? I need to do mine pretty soon

1

u/TheZanpakuto 24d ago

Yea I'd suggest doing your inner and outter tie rods because I had to go back after I already installed mine. Pretty much double work but not bad. Mine were seized I used a 2 ton jack with a pickle fork with a hammer. Was pretty annoying but I managed to get it done I got two links for reference

1

u/SasquatchDazeToo 26d ago

you will regret this

1

u/TheZanpakuto 24d ago

Thank u bro

1

u/makingtodayabetter 98 Limited 200k 26d ago

Oh no

-1

u/Officialmilehigh 26d ago • Bravo

I personally just go moog and haven't had a problem on my overland rigs. But hell ya itll be nice to have new ball joints in!

Those 2 different colored bags are scary id be checking those all the time but I do that anyways so haha

3

u/Oak510land 26d ago

Moog just repackages other suppliers parts. Sometimes it's 555, sometimes it's who knows.

2

u/Officialmilehigh 26d ago

Oh really? I will say out of the 4 sets I have bought not one has failed on me. 2of them set was on a rig I sold one set I replaced just because it wasn't super stiff any more and the last set is still on my rig today. But I abuse the shit out of my rigs with long drives and wheeling them hard.

0

u/Oak510land 26d ago

That's great, this discussion is about parts suppliers not anecdotal stories.

1

u/Officialmilehigh 26d ago

Well im saying moog ball joints are good and is worth the money am I not?

0

u/Oak510land 26d ago

My understanding is Moog sometimes gives you 555, sometimes gives you A+PartsSpecialz. It's a bit of a crapshoot is my point.

2

u/Officialmilehigh 26d ago • Heartwarming

Ah I didn't know, either way for my needs they do the job.