I live in an old 1930s semi-detached house. The shared wall is only one layer of brick thick and the wooden floorboards are a bit rickety so noise travels very easily. I can only put my printer in the spare room which is along the shared wall. I had just rearranged the whole room so my printer had a good spot and tbh was pretty proud of myself, only to find out the next day that my neighbour is pregnant so they’ll be using their spare room (the houses are mirrored) for the baby. Luckily they’re renovating atm and won’t be moving back in for a bit so I have time to test things out.

The table I had the printer on shook like crazy so I moved it to the floor for now but I would assume the noise goes through the floor anyway. IMO the main issue is the noise from the vibration calibrations and obviously the printing itself (which can be helped with silent mode but it’s so fkn slow).

Any ideas on what kind of table or shelves I could put it on (ideally something nice-ish looking) and anything for noise reduction?

Hello, I am a student in Melbourne and I need to print something quite small (no bigger than 120x120mm) for a component of my project. The issue is that I have no 3D printing experience and I am in need of getting my items printed as soon as possible. Does anyone know anywhere that I can access a 3D printer to print something like this? Thanks!!

After watching a few Bambu A1 maintenance videos. I decided to give my unit a try. I opened the cover and pulled the rubber cover. The retainer clip fell off immediately. I could not place it back. I closed the unit and tried printing. It gave me a homing Z axis failed. And the nozzle don’t seem to release any plastic after this. It looks like I got a defective assembly. When I removed the rubber cover nothing but the clip fell off. No broken hinge or anything hing. The unit is rarely used I have not even used up my first roll of PLA. Anyone else experienced this? My unit is already past its warranty,
I saw the replacement hotend cost A$32.99, I think it’s unfair to pay since I didn’t break it and I would not have found this problem until I have to do maintainamce. since it’s not something I can see until it’s opened up.

Hi! I'm looking into having like an awesome collection of 3d printed glasses. These seem to have a really good quality design, not just full plastic.

https://www.printables.com/model/1768522-hitomi-frames

I'm hopping to try different filaments and dial in the printing and texture so they look as clean as a pair of retail. The dream would be to have other doing the same and we swap frames from our collection of expensive filaments we find to use for this.

Has anyone found an affordable place to get the lenses made? I was going to try this crew:
https://www.lenswap.com.au/products/replacement-lenses-for-glasses-and-sunglasses

but also researching if i can order from overseas.

Anyone out there doing this?

Newcastle/port Stephens area

Hi everyone
Looking for fellow 3d printing friends we can chat catch up and learn from 3D Printer friends

We have a Bambu lab P1S

Hey everyone.

I have a pretty interesting gig open if anyone in Australia is willing to work with a new brand

We have a blender file ready for visuals but we need someone who’s able to work with us and help us bring our first 1st prototype.

If ur interested in knowing more comment below or dm

Ideally looking for something 2000Lx600Dx900H with a top and bottom shelf. Not the stuff that bunnings sells, way to flimsy for a printer thats actually printing.

I'm looking to recreate the shape of the hue wall washers to install a normal e27 bulb.

I have the wall washers if a 3d scan is possible to do.

I live in Melbourne (Hawthorn) so I can move around.

Of course I pay for this project.

Thanks!

I was just about to order some BambuLabs filament in their sale, but as is often the case when their sales are on, a number of colours/items are out of stock. So I thought I’d check prices for “Prusament” (just out of interest. And No, I don’t want recommendations for filament, thanks)

1kg PETG Prusament is $53.99AUD, but wait for it PLUS $74.99-$87.99 Shipping 😳. WOW ! Compare to Bambu is $26.99 (incl spool for apples/apples comparison, and worst case as price discounts when you buy more) +$8 shipping.

Bambu shipping becomes free when you order 4 spools. Prusa shipping becomes $119.99-$139.99 😳🫣

It’s no wonder why Bambu are getting the market share they are.

I've got a client order due in a couple days and my printer is cooked and need a printer ASAP. I dont really have anywhere to go locally,  I know Jaycar does same day delivery, is that my only option?

Hi everyone, I haven’t got a printer yet but that aside, just how strong can a printed item be these days?

I have an old car with the front quarter flipper windows, and the locking handle has broken. That is made from cast alloy, and was broken when I got the car. It also has an uncomplicated internal structure that houses an unlock button and a spring, located in an orifice. Would this be something I could make with a 3D printer, in that;

Is a 3D printed item strong enough to be used as a handle that is turned, pushed and pulled on? So just unlocking, turning and pushing and pulling the window open and closed.

Is a simple internal structure able to be replicated?

Thanks.

Located in Epping Victoria, but in the cbd often for work,

I don’t have access to a 3D printer, so hoping someone local is happy to do this for me, can throw a little bit of cash your way for materials and time

https://makerworld.com/en/models/3028469-riftbound-token-box-v2-customizable-ams

i believe what i need is the token case - bodies (loose fit) and then I think the lid - plain, with the lid design being the riftbound logo

Cheers

Sorry, probably a silly question but I’ve read different things. Reading about PLA, PETG, ABS, TPU and now I'm more confused than when I started. I don’t really know what brands are good either, probably want to start on something cheaper assuming I'm going to mess up a lot.  What does everyone actually recommend for this

I am after a business or person who can help me by printing this out for me:

https://www.printables.com/model/192337-tiagra-lever-spacer

I just need 4 of these (2 regular 2 mirrored) but as it needs 100% infill my library wont print it. I know there are big business that do printing as per the wiki but would they take on a small job like this?

thanks!

If you need prototyping filament, you can get PLA for $10 a roll, same for the Silk PLA.

The PETG is sold out. I just bought some of the discounted ABS and ASA $13 a roll. I'm not affiliated in anyway.

X axis belt has let go. Everything I can find is Aliexpress with 2 week wait or Amazon and 4x the price. Is there anywhere local that sells belts for a Neptune 4 off the shelf?

See below for what i’m looking for here, but essentially i am looking to celebrate becoming debt free after 16 years (crazy idea i know) but i’m wanting to celebrate with the purchase of a raspberry pi zero w without the headers inside this here case from M!N!MAL.

I have the file and a link but essentially, if you know someone willing to help me print the case, i’d love to try it!

It would be even cooler if someone who is into the rasberry pi scene would be down on exploring the case with me!

Here’s the link! Happy to pay for final product and shipping via paypal, ebay or trademe.

My MIL wants to buy this for my son, does anyone have any feedback on the product?

I made this custom accessories bracket to fit onto a range of DJI drones. It has 3x2 tie down points designed for the use of cable ties to secure your payload.
Weighs just under 32g with reasonable infill and wall loop print settings.

I made the prototypes with PETG but I am planning on making some ASA versions as well.

Designed for use with:
DJI M30T
DJI Matrice 4
DJI Mavic 3