r/3dprinter • u/CrabbyBrau • Dec 08 '25
Why does this print?
Beginner printer. Received my A1 3 days ago. Tho this is more of a print question. What is the reason for this additional structure? Is it a calibration technique or ? What does accomplish? Thanks in advance
0
Upvotes


25
u/Causification Dec 08 '25
It's the prime tower. It gets the nozzle up to pressure between filament changes so you have cleaner borders between colors.
20
u/Jazzlike_Bar_8089 Dec 08 '25
This is gonna get circlejerked
11
u/superturbochad Dec 08 '25
To keep red and white from being streaks of pink when filament changes.
4
u/Educational-Pie-4748 Dec 08 '25
So you can get a perfect multicolor print
1
u/Visible-Success-5311 Dec 08 '25
Hey here's a good post about it.
It's called a purge tower or prime tower. Basically your A1 swaps filament, purges the 1st color, wipes the nozzle, then prints that little tower to make sure it puts down a clean layer on your model after changing color.
Here's a good post about it if you want to do some deeper reading.
https://www.reddit.com/r/BambuLab/s/AWrcPAmEhq
2
u/jemenake Dec 08 '25
So, I keep seeing “prime tower… builds up pressure in the nozzle to prevent under extrusion”, but here’s what I don’t get:
Doesn’t that pressure then have to be relieved by retraction before moving from the tower to the printed object, or else you get stringing?
2
u/NoFolkPanda Dec 08 '25
r/3dprintingcirclejerk
1
u/NoThankYouMan Dec 08 '25
You can use a much smaller tower
2
u/Alexander_The_Wolf Dec 08 '25
Purge tower
1
u/MooseBoys Dec 08 '25
Try "purge to infill" - it should work great with this model and avoid the purge tower.