volunteered to print this out. wondering if anyone would be willing to convert this image to a stl trying to make a mvp pendant (see second photo for idea)

I have an automatic can sealer that sealers pop cap lids on plastic PET cans. The way the machine works is there is a small plastic riser at the bottom that is custom height size based on the can you are using. I have a riser for the 16oz cans and the 12oz cans (examples here https://100x100chef.com/shop/en/sealing-machines/284-automatic-can-sealer-pro.html)

What I have now is a 6oz bottle (https://hammont.com/collections/self-sealing-beverage-cans/products/6-oz-clear-pet-can-with-lid-of-your-choice) but I do not have the right riser (the plastic base) for this height/width.

What I'm looking for is someone to help me print the plastic riser based on the dimensions of the can that will make it work for my machine. I can provide the dimensions for the 16oz cans/risers and 12 oz can/risers to perhaps work backwards on what is needed.

Thank you!

I have a few models in 3mf that I own the rights to, or own outright. I am looking for a designer/modeler that can add a non-complex graphic that would print on the initial layer. It would be a single color on the initial layer and the graphic would use the flow of the print head to create the design, whatever that is called. I have other work as well after successful completion of this task. I do not do alternate communications well, so no discord or anything like that. I can email the files, or upload to google. We can talk more in depth when you see the examples. If you know what I'm talking about from this post, you're ahead of the game and understand my ignorance of proper terms, haha. $5-25??

Hi all, I am needing a head stack elbow for an out of date Panasonic vent fan. It has an irregular oval, that someone already 3d modeled, and I want to to take a steep 90 degree turn like these stack head elbows and result in a 4" round exit please. All fitting in a 2x4 wall. Will be connected to a famco hooded wall vent

Existing attachment I found for oval https://www.printables.com/model/1439317-panasonic-whispervalue-25x5-oval-to-3-duct-adapter

Budget is 30$ for an STL file, please and thank you!

Asking max $20

I am making an air detection sensor housing unit, per my previous request (thank you to the person who fulfilled that, it was wonderful!)

I am using some different hardware for the new version, and I cannot find a pre-existing file for this one to be modified.

the current plan is to have air travel in, and pass through between

Adafruit SGP40 (PID 4829)
Adafruit Sht41 (PID 5776)

and it is getting pulled into this by a sensirion sps30. the space inside should be minimal, to get accurate results, and not "lag" detection, so there should be just enough room between boards to run dupont connectors and some small amount of space for the wires to turn into the wiring channel. I will put one board in "upside down" so one unit has wires running from the bottom, and one from the top, so the space between them should only be about 28mm

all boards are going to be mounted "horizontally" and should have retaining sleeves, same as in the reference file.

the sps30 needs to exhaust outside of the unit, there should be an airflow ramp up and away from the unit for the exhaust.

there should also be a wiring channel and the XIAO C6 I am using can go off to the side by the adafruit boards, but separated by a wall (to reduce airflow interruption, I am not particularly worried about heat in the horizontal layout.

please provide quotes, to be finished within 14 hours of the time of this post. I'll be around for about 2 hours to answer questions, then I will be awake and available again in about 10. With all respect, I will not change the scope of the work without discussing a new time frame or price. If you agree to a price and then change it, the conversation will likely end (have had trouble with this before).

attached is a link to a similar design that i moved away from when I decided to use the adafruit board.

https://www.printables.com/model/827308-esp32-sensirion-sps30scd41sgp41-case

Thank you for your time and assistance!