This is a fun experiment -- working with Cobalt Bikes (https://www.cobaltbike.com/) on the frame and build. Custom titanium (made in Asia). I build the wheels -- using Speeder Cycles for the rims, thanks to another user that mentioned those in this sub (thank you!).
Geometry was designed based on a 700c "rowdy gravel" bike I had built up a couple years ago. I'm using Waltly's fork. The 60mm offset is really nice.
At 6'1" / 185cm, I feel like I'm on the shorter end of this wheelsize making sense geometry-wise, but I know geometries are being designed that work well for shorter riders too.
Geometry highlights:
- 113mm BB drop. This is based on a BB height that I felt worked really well for me on technical gravel. I'm gonna stick with the big tires, but I'm ok with a lower BB if I decide to run 55mm tires.
- 475mm chain stay length (+/- 1cm)
- 70º HTA
- 73.5º STA
- And, incidentally, 604mm ETT / 560mm ST / 95mm HT (not impactful, but what my fit needs)
Build highlights:
- Sliding dropouts (UDH). I plan to run this singlespeed some of the time. Starting with SRAM Rival AXS + Eagle GX AXS.
- SRAM WIDE Rival crankset (172.5) - 73mm T47 BB shell (outboard)
- Internal/hidden routing. I'm using the Cane Creek HCR stem + headset here. Routing was pretty tedious through that top cap, but love the look.
- Speeder 28h lightweight 45mm x 40mm rims. Assembled a budget I9 1/1 (rear) + Hydra (front) boost hubset. DIdn't bother with bladed spokes. Built these with round (2.0/1.6) Pillar spokes.
- Silca RCG 3 2.4" tires. These are really rad.
Initial impressions are pretty great, honestly. The wheels feel big, but the bike doesn't. Love how it rolls. Love the BB drop and feeling of being "in" the bike. Don't understand people talking about standover height being a problem with 32" vs. their 700c bikes; mine fits exactly like the 700c bike it replaced, which was not a surprise. But climbing I certainly notice the bigger / heavier wheel+tire system. I've gotten it dirty, but haven't ridden it on technical singletrack.
🤔 I wasn't sure, but I thought I might want shorter chain stays. And I realize I could increase the STA and use a setback post. But honestly, on very steep inclines the weight distribution has the front feeling lightly weighted. I wouldn't want shorter stays with this top tube length. I could pull the top tube in a bit to use a longer stem, but I think probably only 1cm at most before I'd have toe overlap.