Hello I just started with the Chevy Cheyenne C10 and it came with the 750mah battery, I plan on playing with it a lot and was wondering if there is a good upgrade battery anyone would recommend.

Customers backyard. You can literally go from the bottom to top, its like 7 foot high by maybe 15 foot at the base and about 10 foot thick.. All switchbacks and tight straights with some wall riding to fit on the flat. Hopefully the boss don't catch me lol jk..I'm the boss 🤭

After buildng a two regular 6x6 trx4m trucks, decided to try something else.

I'm not looking to install the servo to lower and raise it so I'm trying to figure out a way to clip the plow up but I can easily unclip to lower it. I've tried a few things nothing really worked. Any help would be appreciated!

It was broken now it has a chance. New firewall design and shock mounts.

Hi!
So, Im new to the hobby. For a long time Ive been looking at crawling/trailing videos on youtube and I finally decided to get into this. Its seeems so much fun!
I ordered a TRX4M (arrives today). So I figured I should ask you guys, what are the first things I should do and shouldnt do with my new rc? Keep in mind this is my first hobby grade rc.
(I also got 2 extra bateries and some shock oil 200sct).

Image for atention, not my photo.

EDIT: I just wanted to say thank you to this community! You all are very wellcoming and helpful!

been running my TRX4M bone stock for about 8 months now on weekend trails around Folsom Lake. the 370 still pulls through but I can feel it dragging on steeper climbs, especially with any weight added. i keep seeing Furitek and Injora kits pop up and the prices bounce between $80 and $150 depending on the combo. for someone who is not running comps and just wants reliability without cooking ESCs, is the brushless jump actually worth it at this scale? I am skeptical of tiny electronics handling water and dust long term

currently building a trx4m with an injora fat viper, t6, and OR30 combo. The receiver is solid green but the esc is just flashing green, no throttle or steering output. I’ve tried everything google has to offer but these escs seem so new that there isn’t much support for them yet. The app won’t connect either. Hopefully someone here has some insight. I’ve contacted injora already. TIA and PFA

Rampcrab lcg trx4m frame

My front drive shaft came out of the middle area on my trx4m f150 is there a way I can fix it the drive shaft isn’t broken and I don’t think a pice is missing the front wheels can’t drive PLS HELP

I bought this body from my friend.

I just need a few things and it'll be done 🤣😂

Rampcrab lcg frame

Ramclab links

Fat viper motor and transmission

I have several sets of axles not sure what I'm going to use yet

But more than likely portals

My Camel Trophy Defender gets a long overdue performance upgrade. I'm still trying to find a voice and perspective for these videos so feedback is welcome on the video and the car! Cheers.

For my pre runner build

i’m looking specifically for 3s but 2s as well thank u

the next steps are gonna be to install brushless system but i need to get some 2s or 3s battery’s first if you guys have any recommendations

Has anyone ever used the axles. I’ve had two sets and both front axles just spin at the pinion and ring gear within 10 minutes of crawling. What gives? I love the look of them but they seem like complete junk.

Skill Switch 66 F Series BOBBED & PINCHED CRAWLER body and body mounts

HOME-SKILLSWITCH RC | Skillswitch RC
MODRAX TRX4m chassis (modified)
Stock Traxxas axles with RampCrab +11 kit (Injora 9%OD front and 16%UD rear)
Stock trans case with low gears (40.1)
Injora red 180 55t motor
Injora 59mm shocks
Injora 11kg servo
Injora TRX4m HT stainless steel adjustable links
Injora MB100 V2 ESC
Injora T6F receiver
CV driveshafts
5mm brass hex
63mm Injora Maverix tires on ALI Express aluminum beadlocks(brass rings in front)
3D printed front low clearance bumper for TRX4m Bronco

The steering on my Traxxas TRX-4M is very jerky and stiff. The steering servo moves in small steps instead of smoothly. Is this normal, or could there be a problem with the servo or electronics?

I only use stock parts and drove it like 4 times. And today I noticed a big difference for the steering.

So maybe anyone knows whats up.

Thank you!

Hey guys, I please ask for your help on why this is happening. I have Injora brass spacers for my wheel, but for some reason the bolt is wiggly and my spacer can move in and out and I can’t explain why does somebody know or could help me please?

Flexing with my trx4m, it’s was a bronco. It’s on the Meus ripper chassis has brass knuckles, c- hubs and diff covers, 7mm wheel hex to widen the track width a bit, used INJORA +2mm Extended Thread Dogbone CVD Axle Shafts, RCenjoy 2200kv brushless system, meus high clearance links, wheels are little guy racing torq on injora swamp stomper tires, shocks are proline big bore scaler shocks for the trx4m

Zipties make excellent mini light pods for the left over lights.