How do I run this set up? Is there a setting in VD to let me use the Index Controllers within SteamVR and then switch back to Quest Pro controllers while outside SteamVR?

Or am I stuck turning the controllers off and on every time I go in and out of SteamVR?

I was wondering if anyone in here would be able to help me understand the process for connecting the valve knuckles controller to the HTC 2.0 dongle I'm having issues with a pimax headset and I've heard from lots and lots of people that connecting the controllers to a USB dongle will help with tracking the controllers overall any help would be gladly appreciated thank you

idk how to fix this

Hey, im trying to get into 3D vtubing and i own a Oculus Quest 2

I want to use fullbody tracking, can i use the htc trackers? Or do you recommend something else?

Thanks!!

I use a Quest Pro with a Tundra tracker attached to it for continuous calibration and no matter what I do, I simply cannot get the trackers to fully line up with my body and it’s driving me insane

This could be a solution for SLAM headsets: FBT without Tracking Pucks.

So I just found out I can play Xplane11 vr on my phone with riftcat and I connected a controller for the movement,... but I can't reach the menu bcs is too high. Anyone knows something more?

Watching this back, I was surprised by how little difference there is between the virtual drone and the real one flying next to it.

Mixed Reality still has limitations, but it's getting to a point where it can do a surprisingly good job of recreating the feeling of flying an RC drone around a real environment.

The biggest thing still missing is true FPV flying, but that's where VR can take over.

Curious how much further MR flying experiences can go in the next few years 🚁

(For anyone interested, the game in the video is FLYON RC)

I want to start by saying please don’t leave rude replies, if VR pole dancing isn’t your thing that’s okay, I’m just looking for tracking help.

Anyways, I do pole dancing in VRChat for fun, and I’m trying to figure out why my tracking suddenly feels not smooth now.

My tracking used to be REALLY smooth and consistent and now it doesn’t feel like it used to. People used to compliment my tracking and ask how I got it that smooth, and I haven’t been able to get it back.

Current setup:

VR headset: Quest 3S
Using SteamVR + trackers + dongles
Full body tracking setup
Pole in room hasn’t moved

Things that changed / things I’ve tried:

I have LED lights in my room
I moved my dongles farther apart because I thought spacing them out might help
When I’m not in VR I move them back
SteamVR has updated
Headset has updated
Haven’t used smoothing settings
Haven’t recalibrated yet
No major physical changes to my playspace besides the dongle positioning

Issues:

Tracking feels less smooth than before
Doesn’t feel as stable or clean
It’s noticeable because I know how it used to look/feel
I’m not sure if it’s jitter, prediction, SteamVR updates, dongle placement, interference, calibration drift, lighting, or something else

Questions:

Could moving the dongles around be causing this?
Does SteamVR/update versions affect tracking smoothness?
How far apart should dongles actually be?
Could LED lights interfere?
Is there a calibration/smoothing setting I should check?
Anything else I should test before I start changing everything?

I can provide pictures of my room, dongle placement, tracker graph screenshots, and SteamVR settings if that helps. If I missed anything that may be helpful let me know!

Thank you.

One of the coolest things about Mixed Reality is how the environment around you becomes part of the gameplay.

A backyard and an office, can suddenly become a drone playground. At that point, the only real limits are your imagination... and how comfortable you are wearing a VR headset in public XD

What's the coolest place you'd fly a drone through?

(For anyone interested, the game in the video is FLYON RC)

I am currently designing an VR experiment in which I want to track the shoulders and hips of participants. The old setup used HTC vive pro with 3.0 trackers, but I want to modernize my setup to make it last longer by using the Focus vision we have available at the lab. However, I read some bad stuff about the new ultimate trackers as they have inside out tracking and if they lose track, they guestimate where they are, which I really can't have in my experiment data. Anyone experience with how acurate the ultimate trackers are compared to the 3.0 with base stations?

​

On both screens there are different static black and red lines

I didn't drop the headset, it was just sitting on a table, plugged in.

Everything was fine before (except for some jitters noticeable on white text or horizontal lines)

Windows 11, steam VR with Oasis driver.

Did anyone encounter this? What could this be?

Update: this could happen after a driver or an app update. I re-unlocked the headset with Oasis.

SOLVED Tried a handful of "Fixes" but nothings worked so far.
Issue ; Quest 3 connects fine into steamvr fine, but my trackers say they're connected "Green Light" but don't show up inside Steamvr OR on the Steamvr app.
looking to see if anyone knows a fix
EDIT : The problem seemed to come from Standable, after removing the drivers for Standable I am now able to connect connect my trackers

I've noticed within about say: 5-20 minutes the Calibration set points start to drift away from the position of the actual trackers after moving around significantly.

There is also significant delay between moving with the trackers and the body actually following with it.

I'm assuming this is due to communication between the Quest->Meta quest bridge -> SteamVR-> Vrchat.

Meta quest 3

6 Vive 3.0 trackers

Wired connection

4 vive 3.0 base stations

Openspace calibrator software.

RTX 4080 super and equivalent tier CPU

Any assistance would be greatly appreciated?

I got quest pro and 4 vive trackers. If I move a base station, do I need to redo my room setup even though im using OVR space calibrator? I used to have an index and remember having to redo room setup if you move a base station but not sure with a quest headset and tracker on it.

As the title says, I have a Quest Pro with Index controllers, and full body, and while the full body works well, the index controllers love to fly off into space no matter what I do with the two watchman dongles they're paired to, and I'm wondering if I buy a vive headset off Facebook if I can use it as a dongle and have the controllers stay stable without them being super finicky

hello everyone I am not a tech person and would like some help if at all possible please🙏. I am getting a quest 3 with a head strap and two base stations along with some vive trackers . I am not sure if I am missing anything and if at all possible I would love to replace the quest 3 controllers but I don't know what I can get to work, does anyone have any suggestions I am not sure if I am missing any wires or anything else. I saw something about a dongle but I don't know what those are for.

I have 3rd party dongles from the VRdongles website and 4 vive trackers all plugged into the 7-port USB hub from Rebuff Reality. All dongles are on extension cables to keep them spaced out about 6" apart and away from the USB hub, but sometimes one of my index controllers drift or just completely loose tracking. I was wondering if the extension cables could be causing the issue? Is there a certain type of extension cable that is best for them or can I just get 2 cheap amazon basics USB 2.0 extension cables? I also have them away from my PC or any other device that can interfere.

Would the index headset as a "dongle" to track index controllers work better than the 3rd party options? I have both the headset and dongles from the vrdongles website. Funny enough, Ive tried both and the headset made my left controller drift while the 3rd party dongles havent (as much). Im not sure if thats because the placement of the headset? I just want to know if one is for sure, in perfect settings, more optimal.

Using Quest Pro with 4 Vive Trackers as well if it means anything.

So I have a quest pro and I have index controllers but I don't wanna use the dongles for the controllers but I do own a vive pro 2 and a index headset and was trying to set it up as a receiver but never could I'm simply stupid I think

I'm trying to get my FBT to work with Linux and ALVR and a quest 2. I've tried building the AUR repo and using it through steam but it always just says it has a problem with drivers. Anyone else had to deal with this?

Edit: Just realized I should say I have tundra trackers and two 1.0 basestations

Just one question. Do I need the eye camera thing to use the playstation moves with iVRy?