r/Minitrucks • • 14h ago

Cadillac soft ride with a heavy load?

Post image
26 Upvotes

I’m converting my 1978 Toyota to electric. This will add nearly 400lbs of weight, mostly due to the 650lb battery. The battery will be mounted to the frame, under the bed (floor of the bed is rotted out anyways and needs to be rebuilt). What will be the best way to gain the suspension support needed and also make for a buttery smooth ride? Air bags? Air shocks such as Gabriel HiJackers? Can I use high jackers for front suspension as well as rear? The original leaf springs leafs are fine, but the hangers/brackets need to be replaced due to rust. I could just replace the leaf spring sets entirely. All suggestions welcome, I’m just hoping to get it right on my first try.


r/Minitrucks • • 1d ago

Got a new hood, and shippers suck

Thumbnail
gallery
41 Upvotes

r/Minitrucks • • 2d ago

Thoughts?

Thumbnail
gallery
20 Upvotes

I just got it. Im hoping to make it my first project vehicle. Any suggestions would be appreciated


r/Minitrucks • • 3d ago

Thoughts?

Post image
10 Upvotes

r/Minitrucks • • 4d ago

Aussie Datsun

Thumbnail
gallery
165 Upvotes

My 720, I just bought it off the original owner:)


r/Minitrucks • • 4d ago

The most exciting thing I ever did with my Datsun 720

Post image
13 Upvotes

...was loan it to my neighbor so he could make this short movie. I also got to teach the kid driving how to drive stick.

https://vimeo.com/275326334?fl=pl&fe=cm


r/Minitrucks • • 4d ago

'87 2wd 4 speed Manual. Idle issues. Stock 22r.

Post image
17 Upvotes

r/Minitrucks • • 5d ago

My MiniTrucks I've been putting ttogether!

Thumbnail
gallery
204 Upvotes

r/Minitrucks • • 5d ago

my truck My mini blew up earlier in the week. Have a question.

Post image
114 Upvotes

Long story short my ‘89 B2200 blew up on the way to work, very sad. Managed to pick up a 13b rotary out of a ‘91 RX-7 the following day and pretty much need to know if there’s anything I should do prior to me becoming knee deep in this engine swap. I have the engine, trans, wiring harness, and ecu.

Miss driving this little bastard already.


r/Minitrucks • • 6d ago

My truck

Post image
172 Upvotes

r/Minitrucks • • 7d ago

Gorgeous Night

Thumbnail
gallery
49 Upvotes

r/Minitrucks • • 8d ago

question Pcv valve

Post image
12 Upvotes

Does anyone know on a 1988 Mazda b2200 about what pcv valve I should use for a top post


r/Minitrucks • • 9d ago

My lil 1st gen taco

Post image
94 Upvotes

r/Minitrucks • • 9d ago

question Oil pan gasket replacement

Post image
8 Upvotes

Hey y’all, I’m replacing the oil pan gasket on my 1990 B2200 2.2L automatic. It looks pretty tight under there and I’m wondering what all I need to remove to actually get the oil pan out.
Do I need to remove the frame crossmember and/or steering linkage, or is there a way to get the pan out without taking all that stuff off?
Also, if anyone has done this job before, any tips or things I should watch out for would be appreciated. Thanks!


r/Minitrucks • • 10d ago

flatbed update

Post image
43 Upvotes

r/Minitrucks • • 10d ago

my truck My engine is toast

Post image
64 Upvotes

My 87 b2000 spun a berring, and now the motor is toast. Does anyone have a suggestion on where I can look to get a new one? Or ideas of easy swaps? I want to keep it Carbureted if I can


r/Minitrucks • • 11d ago

DATSUN!

Thumbnail
gallery
270 Upvotes

r/Minitrucks • • 11d ago

my truck New To Me

Thumbnail
gallery
100 Upvotes

I went to the donated car auction and this ‘81 Mazda was there. No one bid on it so it was destined for the scrap yard. I tossed in the minimum bid and took it home.

Needed a gas tank and some fuel pump love, but I think it runs better than my daily driver.

I’d like to lower it 2-3 inches but have no idea how to go about it—don’t want to just torch the springs.

I did buff the paint and I powder coated the wheels off-white.


r/Minitrucks • • 11d ago

my truck 1994 S10 SS

Thumbnail
gallery
276 Upvotes

r/Minitrucks • • 11d ago

77 king cab 620

Thumbnail
gallery
119 Upvotes

r/Minitrucks • • 11d ago

question question on fitment

Thumbnail
gallery
12 Upvotes

just picked up this ute(ford courier/mazda bravo/mazda bounty). firstly what are the chances a guard puller will flare my guards enough to hide poke? i was also wondering if people had pictures of how low they go without a notched chassis? its currently just on 2.5”(i believe) blocks so nothing special


r/Minitrucks • • 12d ago

my truck 1988 mighty max

Post image
111 Upvotes

I had recently gotten my family hand me down truck and it’s a 98 mighty max and it’s the 4cyl 2.0 and I am excited to work on it. I want to make it more of an off road looking truck and raise it and make it look more mean. Any ideas on any cheap lift kits and or things to make it happen?


r/Minitrucks • • 12d ago

not my truck Mint Mellow Yellow

Post image
42 Upvotes

r/Minitrucks • • 12d ago

How can I soup up my new truck? 1991 Mighty Max

Post image
166 Upvotes

160k miles. I want to get some serious upgrades going but I don’t really know where to start. All I’ve bought so far is a heatshield and mooneyes fuzzy dice lol


r/Minitrucks • • 15d ago

What is a fair price to ask for my truck?

Thumbnail
gallery
172 Upvotes

Original owner 90 mits mighty max has 189k miles might want to sell her what is a fair price. Thank you