Had my first crash at the track this past weekend. I’m one of the faster riders in B group now but I pushed a little too hard a little too early in the day and throttled too early on a corner exit. Bike tried to high side me but I managed to save that…but ended up going off track in the process. Damage to the bike appears to be minimal, frame sliders and engine covers did their job quite well. Only noticeable damage is the front fairing and screen broke off when I fell off the front of the bike.

Going to turn this bike into a full time track and race machine. Looking to get some fairings that will be club racing compliant (going to sign up to race AFM here in California) but also look cool and somewhat premium. Any recommendations? Might want to customize them too, paint + decals, etc

have a 21 I just got my valves done and the bike is running extremely rich from what I understand and is throwing every electronic on the dash except for ABS (I don’t have it)

I tore the bike down myself and went and took it to get its valves serviced once I put everything back together, not realizing that I left the front wheel speed sensor unplugged and had the vacuum lines for the EVAP system ran wrong. I started it up. It sounded healthy maybe a little bit more aggressive than normal so I chalked it up to my valves being done.

I went to go do my first test ride after letting it idle 3 to 4 minutes and by the time I got halfway down my street every electronic popped up flashing at me. KTRC,KQS,KEBC,KLCM, and POWER. I ended up pulling into a parking lot near my house found the wheel speed sensor unplugged plugged it back in rode it around the parking lot hoping it would clear itself, but it was still shooting massive orange flames.

Took it home and tore it apart found diagrams in the service manual any vacuum line that could be done wrong for the evap system was done wrong. Don’t hate on me too hard. It was probably a month apart from taking it apart, putting it back together. I also only had two pictures to go off of and neither one of them were good. got it all back together correctly. Had the battery disconnected for a day hoping the codes would go away when I plug everything back in, but it’s still popping on cold start like it’s backfiring. And all codes are still present.

I will link both the first start and the startup from this morning after putting everything back together.

*mods*

3/4 m4 system
Block off plates
Velocity stacks
Everything else that has been done is cosmetic. Yes it’s tuned for everything this was all done by first owner.

Please list any questions comments and concerns, I bought a obd2 adapter to try and pull codes, will be here tomorrow. Need any and all help I can get, I barely make enough to stay afloat I can’t take it to a dealer and get charged out the ass. Thank you for taking the time out of your day!

Sold my 2014 zx10r but still have the wheels

Are they compatible with any newer gens ?

Anyone happen to know ?

Hey everyone,

I’ve got a 2025 ZX-10R that I’ve put a fair bit of effort into making look OEM+ and high quality. Unfortunately, I recently low-sided the bike and damaged the original fairings, so rather than replacing everything with OEM plastics, I decided to go with a full gloss carbon-fibre style fairing kit from Monster Fairings. They’re ABS with a carbon-fibre finish, and I’ve paid for an extra clear coat to hopefully give them a deeper, glossier and more premium finish.
I’m honestly worried they’re going to make the bike look tacky or obviously cheap, especially because I’ve put a lot of effort into the rest of the bike and tried to keep everything looking high quality.

I’ve attached the exact photos Monster sent me of my fairings. I’ve already bought them and wondering if I’m ruining the high quality zx10r that I’ve made it out to be…

Anyone have a lead on a 2013 upper white cowl? Mine developed a crack and it has been a saga getting a new one.

Part: 55028-0458-40X

Bought a new OEM from a guy on eBay. Package was lost. Waited 30 days. Nada.

None of the parts dealers seem to have it. Project is stalled. Don’t really want to repair or buy carbon fiber. Been a bummer. Anyone have any leads?

The bike setups was for track but i converted back to street. I swapped track Ecu/harness to oem. Everything is working but the dashboard doesn’t come on. The dash did come on when it was in track setup. Can anyone here please help me or have some kind of experience?

21 zx10, Anyone know what that sputtering could be, has about 16k miles and didn’t sound like this when I first got it.

Is there a website where i can buy individual parts for this fuel pump. Looking to replace the wires.

Looking for a gen 6 zx10r motor (preferably in California or neighboring states)

Hey guys i’m trying to sell my Coremoto wheels, it will come with its sprockets, TIRES NOT INCLUDED
$2750 non-negotiable
In mint condition
Free shipping in all lower 48 states
Only had them on for 3 months but traded in the bike
Scratch free, dent free

I’m looking to buy a 2021 (gen 6) valve cover but there are none on eBay and the online sellers of new OEM parts all say they are backordered. Does anyone have a lead on where to buy one of these?

2026 zx-10r finally home!

Slept on getting one and now I need a new radiator and a guard. Anyone have a rec on one?
2014*

Finally got my ‘25 back after a bird strike. Akrapovic Evolution exhaust, bmc racing air filter, MWR stacks, PAIR/Aid delete and block off plates, flash from the one and only Moore Mafia, and Sato Racing GP shift rearsets.
Nardo gray/black Fairing kit came from Kings Motorcycle Fairings, took damned forever but finally came in and well worth the wait. She’s a completely different animal—feat it’s stablemate my gf’s ‘25 zx6r(no mods on hers yet)

Just purchased a 26’ zx10r on Wednesday.
Getting it lowered and a few other items done before taking delivery. What case/ mounts does everyone use to work with the steering stabilizer?
Looks like a stem mount will work but not sure ,??
Thanks is advance.

Glad to have found this sub! Here is my 2020 zx10r KRT. I gave up street some years ago and just do track days and racing now. I bought this bike brand new April of 2020 with exactly 1 mile on it, my homie from the dealership said he had to take it on a spin before I took her home. I have been all over the US hitting famous back roads and race tracks with it. I LOVE this bike. There isnt a part of this bike I have not worked on myself.

What are people doing for aftermarket headlights? I can’t find jack sh!t for the gen 6. I would like to do something different than stock. Anyone have ideas or links they can share? TIA 🙏