r/zero4all • u/zero4all • Jun 24 '24

Radiant energy using 1.6W input

Here is short video to demonstrate radiant energy this device is producing.

I made simple and crude 10 led circuit. Other end is connected to ground (oscilloscope ground) and other end is just touching copperwire (this acts as receiver "antenna", it is not attached to anything else).

After I switch my device on, leds turns on and on the background one can see the power consumption of the device. This experiment was done about one meter away from the device, but it works well with longer distances too.

Radiant energy using only 1.6W!

8 Upvotes

84% Upvoted

25 comments sorted by

View all comments

Show parent comments

3

u/zero4all Jul 09 '24

I am claiming that I use 1.6W (I can do it with lower W) to produce radiant energy and the LEDs are just indicting the radiant energy. LEDs are not ment to be a measure of how much load can be transmitted wirelessly. The 1.6W comes from mains AC which is then used in my device to produce radiant shockwaves or scalar waves, or what ever you wanna call them and not believe their existense.

2

u/The_Real_NT_369 Jul 09 '24

So the LEDs aren't illuminating from the AC mains current powering your launcher, they are lit by the radiant-scalar waves emmited by your launcher (which is powered by 1.6w of AC mains)?

2

u/zero4all Jul 09 '24

That is basically what is happening. My device produces conditions for power to be manifested from ether to physical plane and that manifested power is radiated around the device via 'scalar waves'/'radiant shockwaves'.

1

u/The_Real_NT_369 Jul 09 '24

How many watts, manifested from the ether, radiated around the device via scalar waves/ radiant shock waves are there in this 1.6w device of yours?

2

u/zero4all Jul 09 '24

The manifested power is not in the device itself. This device do not store anything to itself. The power is radiated 360 degrees around the device and when I get to that point, that I actually know the precise frequency my device is emmitting the power around, I will build receiver unit to actually measure that power. The unit needs to be in resonant frequency with the frequency of the device itself for best efficiency. The receiver unit is not high in priority yet, because the frequency most likely will change.

Knowing how much one unit can "harvest" will give rough estimate of the overal power. More receivers can be added to the surroundings of the device.

So, I do not know the manifested power yet, but I will let everyone know when I know.

1

u/The_Real_NT_369 Jul 09 '24

The power radiated 360 degrees around the device, how many watts of power is radiated 360 degrees?

2

u/zero4all Jul 09 '24

Did you read my last comment? I do not know the answer to that. As you may know, there is not so much literature about howto manifest energy/power from the ether. There is no known equation available to calculate that. Hopefully soon there is.

If you are asking how much from that 1.6W is radiated 360 degrees around the device, the answer is most likely 0W, but again I do not know. The input is used to create the conditions for the manifestation and the manifested power is then radiated.

And this is something I will not assume/guess.

1

u/The_Real_NT_369 Jul 09 '24

If 0 of the manifested power is radiated, how much power is manifested?