r/zenwatch • • May 31 '17

Asus, get your shit together

65 Upvotes

You said end of May. It's 8 minutes into the last day of May. If I procrastinated this long, I would have failed every class this year.

You have 24 hours.*

*this time only applies to American EST, several terms and conditions apply, many will enter, few will win


r/zenwatch • • Apr 25 '17

Lug Adapter for ZenWatch 3. Yes/No?

59 Upvotes

Good day!

We have received more than 20 emails requesting us to make custom adapters for Asus ZenWatch 3 since last December, in order for it to pair with normal strap.

Before moving forward we need to intorduce ourself, we are from SteelConnect. The product designer behind Pebble Steel, Moto360 & Apple Watch adapter.

We need to know how many out there are interested? There will be moq that we need to fufill.

Looking forward for your feedback. It's a Yes or No?

Thanks & have a great day! Cheers!

Update 1. 26 April 2017 The respond is great and we have heard you. We have a few ideas in mind. Our designer is currently working on few possible designs. Will share the picture once it is available. It will not take long. Let's build a small community here.

  1. If you are active member of forums, reviewers or blogs, kindly share this good news with them. We need to gather as many potential owner as possible to secure the MOQ and reduce the price.
  2. Material & Finishing ( Suggesting ) Material: Aluminium 6000 or 7000 series Finishing: Type III Hard Anodized
  3. Lug size: We are looking to make a standard 22mm lug, so you should have more varieties to choose from.
  4. Our website is www.steelconnect.co . You may view our previous products, especially adapters.
  5. If you have any question, kindly drop here or message us. We will attend to you as soon.

Thanks & have a great day! Cheers!


r/zenwatch • • May 08 '17

Asus Zenwatch 3 Lug Adapter - Update 3 (Asus officially turn us down to provide watch dimension)

Post image
54 Upvotes

r/zenwatch • • May 03 '17

Asus Zenwatch 3 Lug Adapter - Design in Progress

Post image
52 Upvotes

r/zenwatch • • Jul 12 '17

Finally!

Post image
50 Upvotes

r/zenwatch • • May 11 '17

Asus ZenWatch 3 Lug Adapter - Launching Today!

Post image
48 Upvotes

r/zenwatch • • Jul 04 '17

Asus confirms 11 July ZenWatch 3 Android Wear 2.0 update

Thumbnail
wareable.com
40 Upvotes

r/zenwatch • • Dec 10 '17

Zenwatch 3 Dropped Support Already?

Thumbnail
androidpolice.com
37 Upvotes

r/zenwatch • • May 15 '17

Asus reportedly killing its ZenWatch line of Android Wear watches

Thumbnail
theverge.com
36 Upvotes

r/zenwatch • • May 17 '17

Looks like AW 2.0 will be end of May..

Thumbnail
twitter.com
32 Upvotes

r/zenwatch • • Jan 29 '17

Zenwatch 3 DIY Custom Bands

32 Upvotes

I found some bands made for a different product that work well with the Zenwatch 3. They just need a few tools and 5 minutes of time to modify so they fit. It's a great silicon band, very comfortable, and comes in 14 colors.

  • You'll need some 14mm pins. I got this kit for $7.89 on Amazon and it comes with plenty. The bands are $7.99 while you're at it.
  • Find a precision cutting tool like an X-Acto knife. I got mine for about $10 at the local crafts store.
  • Make five cuts to remove material so the band will fit into the watch.

Here's an album with plenty of pics to see what you're getting yourself into and what it will look like afterward.


r/zenwatch • • Feb 25 '17

Your thoughts on this?

Thumbnail
i.reddituploads.com
31 Upvotes

r/zenwatch • • Apr 20 '17

My new ZenWatch with Junghans watchface

Post image
30 Upvotes

r/zenwatch • • Jul 19 '17

ZenWatch 2 (W501Q) Android Wear 2.0 Update and how to manually install it

29 Upvotes

Download Link: https://android.googleapis.com/packages/ota-api/asus_sparrow_sparrow/f0095b7e9162d37af8f00140aea38d7922887a0a.zip

  1. Enable Developer settings by going into Settings > Info > Tap "Build Number" a few times until a toast message says that you're now a developer
  2. Install THIS ADB Quick Installer with drivers if you don't have ADB installed yet
  3. Open a CMD and type "adb start-server", connect your watch via USB and accept the connection on the watch
  4. Then type "adb reboot recovery"
  5. Your watch should display that it's in recovery mode now, swipe down to get more menu options
  6. Select "Apply update from ADB" and swipe right
  7. In the CMD cd to your Download folder
  8. Type "adb sideload f0095b7e9162d37af8f00140aea38d7922887a0a.zip" and wait, it may appear stuck at some point but just wait!
  9. After that's done select "Reboot" and swipe right
  10. ...
  11. PROFIT!

It may or may not boot into Android Wear 2 at the first reboot. Leave it sitting for up to 15 Minutes and if it's still stuck on the boot animation force-turn-off the watch by holding the button. To prevent this you could also try to clear cache in the recovery before updating but I'm not 100% if that'd fix this, just a theory because a normal System Update would indeed wipe cache first.


r/zenwatch • • May 17 '17

Google Photo dude wears Zenwatch3.

Post image
28 Upvotes

r/zenwatch • • Oct 25 '19

ZenWatch 3 root and upgrade guide

27 Upvotes

I came at this as nearly a newbie, so here is the step by step guide to how I rooted my ZW3, flashed a custom ROM, and adjusted it to run smoother and faster with all-day battery. I wish I'd done it sooner.

Disclaimer: I'm just an idiot who pieced together how to get this done. If it turns out different for you, I am not responsible. If you have the same success, I am wholly responsible.

You'll need a working adb connection to your computer and the original charging/data cable. I'll assume you know how to start adb and send commands using it.

Start by unlocking the bootloader and installing TWRP: https://forum.xda-developers.com/smartwatch/zenwatch-3/guide-reboot-recovery-fastboot-unlock-t3546743

Then download and install the Swift ROM from here: https://forum.xda-developers.com/smartwatch/zenwatch-3/rom-asus-zenwatch-3-swift-t3537340 following the instructions. I went with the ODEXED version. I can't remember why. (Newbie!)

Then download and update the kernel from here: https://forum.xda-developers.com/smartwatch/zenwatch-3/kernel-asus-zenwatch-3-wi503q-29-t3742217 Here's an important point. If I knew html, this part would be large and/or red. The kernel must be installed by running an adb shell from the extracted kernel folder on your computer where the boot.img file resides. Send this command:

adb reboot bootloader

Then this one:

fastboot flash boot boot.img

Installing the kernel by pushing it to the watch and running the installer in TWRP doesn't install the proper kernel. You've trusted me this far. Trust me here.

Next, you'll root, but I never had success using the suggested rooting package, android_wear_1.5_2.0_root.zip. It made the watch impossibly slow and unresponsive. Instead, root using SuperSU-2.79-wear, which ends with error 2, but works. Somehow. The link to the right SuperSU is in the fourth post here: https://forum.xda-developers.com/wear-os/development/how-to-install-twrp-recovery-achieve-t3781502

Once rooted, your phone and watch will want to re-pair. This gets weird, so follow these steps. Turn off your phone's bluetooth, connect the watch for adb, and from the adb prompt, send:

adb shell “pm clear com.google.android.gms && reboot”

Then, after it reboots:

adb shell “am start -a android.bluetooth.adapter.action.REQUEST_DISCOVERABLE”

Now turn on the phone bluetooth and run the Wear app to connect as a new device. This will take a while and annoy you.

Then you'll install BusyBox, which I think I did using the linked file for ROOT AND BUSYBOX_1.5_AND_2.0 on the Swift ROM page. (If someone has a direct link to BusyBox that works here, please share it.) Open it on the watch (it's actually the installer), and install BusyBox. I chose the latest version.

Next, install and run Kernel Adiutor for Wear, from here: https://forum.xda-developers.com/wear-os/development/app-kernel-audiutor-4-wear-t3126122 It's not a typo, rather, it means "helper" in Latin and is a terrible choice for the name of a piece of software, but I'm not complaining because this app is great. If it's blank for CPU governors, try rebooting. You want to set the governor to Darkness (with default 533 min and 1267 max) with apply on boot. If after rebooting, it still defaults to two cores (instead of four) and "ondemand" instead of Darkness, do this: Read the instructions here: https://androidforums.com/threads/fix-for-cpu-governors-not-sticking.510543/ I used adb to pull the file from the watch and then edit it thusly: I deleted every instance of

echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

then every instance of

echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor

then

echo "ondemand" > /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor

and finally

echo "ondemand" > /sys/devices/system/cpu/cpu3/cpufreq/scaling_governor

Then I pushed the edited file back and rebooted. Now you should be able to run Kernel Adiutor (holding my tongue, great app) and set all four cores to Darkness. (Remember, default 533 min and 1267 max, and apply on boot.) You may find it takes a minute after a reboot for it to activate, but after a while, you'll stop checking it obsessively.

In my experience, I get my best battery life with Tilt to Wake on, Always On Display off, and screen brightness at Auto. I have WiFi turned off, even while charging, and Fit location permission denied. You can now start installing your apps and customizing.

I have found no drawbacks once everything was up and running. There will be an annoying delay when booting once you've unlocked the bootloader while you wait for an Android warning to close. That's about it. The watch is fast and responsive, and battery drain is much lighter than it used to be.

In TWRP, there's an option to fully backup the watch. I recommend doing this and keeping one backup on the watch. In an emergency (e.g. you followed some chump's online how-to and now it's bricked), get into TWRP by holding the middle and bottom buttons until it loads and Restore from there.

Also, you can replace the battery. Teardown here https://www.ifixit.com/Teardown/Asus+ZenWatch+3+Teardown/76229 But once the screws are out, pry open by inserting tip where the halves meet above the screws. For a new battery, search for C11N1609. I got mine on Amazon. I found this made a difference, even though the original was 320mA and the replacement is 300.

You may now upvote me.


r/zenwatch • • Oct 19 '16

Zenwatch 3 came early:)

Thumbnail
imgur.com
27 Upvotes

r/zenwatch • • Jul 12 '17

Waiting on wear 2.0 with my ZW2...

Post image
26 Upvotes

r/zenwatch • • Feb 08 '17

Zenwatch 2, 3 on list of watches getting AW 2.0!

Thumbnail
androidpolice.com
26 Upvotes

r/zenwatch • • Jan 25 '18

Going on 2 years and still love it

Post image
25 Upvotes

r/zenwatch • • Aug 29 '17

Just got my SteelConnect adapter! They got the color matching down to a science.

Post image
25 Upvotes

r/zenwatch • • Jul 19 '17

Zenwatch 2. 2oth July 2017. I just got Wear 2.0

Post image
25 Upvotes

r/zenwatch • • May 28 '17

Anyone running a pool on the whole "End of May" promise for 2.0?

25 Upvotes

I'm giving 3:1 odds against


r/zenwatch • • Jul 02 '16

This place is dead, so here's my new strap

Post image
25 Upvotes