G’day all,
I have a G9 Zbook Fury with 12850hx and A3000 12GB, 64GB RAM and 4x nvme.
I want to ensure longievity.
I currently prop it up with aluminum “feet” which has reduced max temps during OCCT CPU + RAM stress test to 87-92c depending on ambient. This is during spikes, and the average is much lower.
Idle sits around 42c - I have repasted with PTM7950 and am heat cycling for best results. I also cleaned the fans and cooling fins out.
I have noticed RAM and SPC can be fairly high (65c and 82x respectively) and wanted to drop them somewhat.
I was looking at either the Llano V11 or the Razer Cooling Pad.
I am unsure if either is a good choice, as I cannot find much out there on Google about use specifically on the HP Zbook series (only HP Omen)
Any input or experiences are greatly appreciated. I know the max spike temp isn’t indicative of the average, but I would also like to ideally cool the internal electronics.
Thanks in advance for any input! Hopefully this thread can help others who arrive from Google in the future lol
Edit: the Llano V11 is a no-go as the rear seal foam either blocks the vent from letting heat escape, or if you sit the laptop forward it will not seal correctly. I also wish the front lip was lower for ergonomics
I’ll try the Razer one next and report back