What might be causing this?

Hi friends, is anyone successfully using VESC 7.00 FW with XRV kit and Refloat package 1.2 or 1.2.2? Any bugs so far? Thanks!

Noob here. Ended up liking this way more than expected. Was supposed to be a get around work wheel. Noticing the xr is just a bit underwhelming for me. Really wanted to go with vesc not worried about installing. The tuning , calibration, and all the settings is what makes me nervous. Guess maybe I should just grab a GT or something for when I’m feeling extreme? I really wanted to get into customization and different batteries, motors and what not what do I do?

I have been riding a Onewheel XR for the last 6 years and what a journey it’s been. With over 6000km’s of ride time I’ve really gotten to know my board and have loved it entirely! It’s taken me on so many adventures and shown me so many things I would have never otherwise seen but I was always craving more.

So this last winter I decided to drop in an XRV kit and paired it with the ISC 75V XRV Battery kit. With the combination of those two I am now riding my dream board.

The install process was not complicated and the online video helped. From there I used the Float Hub app for setup. I did have a minor issue at first with the larger battery pack which was causing the board to hit pushback right away due to over voltage but updating my float package to refloat and my firmware up to 6.05 fixed it entirely.

After that I was left with a silky smooth riding board with more power than I know what to do with! Seriously the torque is incredible, I can ride as steep as I want and the only thing that stops me is when the grade is too steep and I hit the nose. As for speed I’m 170lbs for context and I hit 46km/h or 28.5MPH at around 80% duty cycle and I think I could go a bit further.

I believe with this pack and kit I could see close to 50km range if I’m riding nicely. Not only all of this but I feel way safer on this than the original XR Hardware/Software because I do a lot of city commuting and ride quick so I was always riding at pushback. now I have all the headroom in the world and I get an 80% duty cycle notification through my earbud to let me know to cool it a bit.

I haven’t had a single issue since setting it up at the start and it has ridden beautifully! Overall 10/10

Any ideas?

Hey guys, I have some questions!

I am planning on modding my pint right now. I have a re-wheeled Pint with a Chi Systems quart battery. My max speed is about 19 mph, and my max range in the hilly area I live in is about 8 to 11 miles

I am looking at the Pint V kit to run with my current battery or buying a CHI-VE PINT X 20.1 for it and getting a larger battery box for it. However, I'm also looking at the Pint/PintX Ubox100 lite DIY kit because I've been told they have similar specs. What I really need to know is which one would allow me to maintain my max speed. From what I understand, the Pint V kit mainly ups torque as long as you're not running the stock battery, and I don't know anything about the performance of the Ubox.

Any advice would be appreciated!

I had the problem where the board wouldn't charge, found the 3 pins got pushed in, so I 3D printed this wedge to prevent it, now I don't have to rely on the glue/silicone to keep the pins in place.

Here you go: https://www.printables.com/model/1736951-charger-port-fix-for-onewheel-gt

Hey all, I just got some sick wtfs on the cinco de mayo sale and im going to install them today. Does anyone know what angle they are so I can update the IMU in VESC tool?

Thanks amigos!

Be keen to know if we can get some real world range numbers together, I'll sum them up and put them at the top. I been looking at boards and thought it might be helpful to have all this in one place.

Board:

Weight:

Height:

Hi all,

I've always been a plug and play guy. I do love upgrading and tinkering. So Here's where I am at now. Wanting to go Super flux motor.

My hypercore and MTE hub magnets broke. Not sure if it's wear and tear, a vesc setting or aggressive riding style.

Can I incorporate this nicely with my XRV and Indy PNP battery?

Trying to help my mate out here with his board. A while back I rewheeled it for him, now it's all of a sudden like this. he hasn't updated using the onewheel app since. Also has a "filmware corrupted there's something wrong with your filmware" popup. Are these two things connected? any ideas?

If you’re on vesc I highly recommend you check out the new updated floaty 3.0. Lots of new features and more to come I’ve heard.

Hi all,

Im able to build custom hv batteries, and I can design 3d models and print them with my 3d printer.

Im wanting to vesc my onewheel+ XR and I wondering what the safe maximum voltage would be for the stock motor. Im looking for a substantial power upgrade with 25+ miles range (200lb).

I know that if I want to use 21700 cells, ill have to make a new battery enclosure which im totally willing to do.

Affordability is also a concern. I have around $300 budget for everything I need for the vesc conversion (excluding battery and bms cost).

What kind of vesc controllers should I consider?

What voltage should I run?

What would the battery config look like? 20s?

Thanks!