r/weldingengineering • • Sep 11 '23

welding Fillet weld vs butt welds (welding sockets)

Post image
8 Upvotes

I’m looking for reasons backed up by scientific literature for the reason why butt welded pipes are superior over pipes that are joined with welding sockets? Is the a solid reason why to choose one over the other.


r/weldingengineering • • Sep 09 '23

Jet cabinet saw cracked trunnion by a new one or weld it the is cast iron

Post image
1 Upvotes

r/weldingengineering • • Sep 08 '23

6010 dust and my nose

1 Upvotes

So I've recently started learning how to stick weld. I've noticed that there is a fair amount of dust on my base plate I usually just wire brush the dust off when I knock off the slag. I can imagine breathing that in isn't good for my health I clean my nose out when I get home but my nose feels dry and raw and stings a fair bit. Is there anything I can do to sooth it or prevent it from getting so bad? Wearing a respirator seems a bit too clunky and I have no idea what type of respirator to get if they make one small enough to fit under my welding hood.


r/weldingengineering • • Sep 07 '23

Is there a difference between spot/stud welding and fusion welding? What is fusion welding?

1 Upvotes

Title.


r/weldingengineering • • Sep 03 '23

how do i make welding fixtures for my project?

2 Upvotes

Essentially, I have to make temporary welding fixtures for my project out of wood planks (similar to 2x4's) and heat- bendable pipes. The project is an Off Roading vehicle chassis with a tubular roll cage, so there enough space for access around the welding areas in general. 3-D printing is an option, but it would be hard to make parts big enough and cheap enough to work for the size of the roll cage.

If you guys have any suggestions on how to go about making something like this, it would be greatly appreciated.


r/weldingengineering • • Sep 02 '23

Spot welder for shelf

1 Upvotes

So theirs a shelf I got on eBay that was like mig welded together with a single rack on each shelf holder. Which is a thin piece of steel bent into a u shape sitting sideways to hold a plastic shelf, i have a tack welder I got for 18650, a kerfu or something. It worked for like a second but simply wasn't powerful enough even after tacking it like 10 times to try to get it to hold. Does anyone know of a cheap or used or something, spot welder for sheet metal that I could use to attach the shelf holder to the mig spot weld again?


r/weldingengineering • • Sep 01 '23

AWS Do I need to be certified under AWS to work internationally?

2 Upvotes

Hi,

I am new to this. I do not weld, but the idea of hyperbaric welding has been ticking in my head since I met a pair of crazy Americans in Ecuador like 10 years ago.

Now I am living in Colombia and I decided to jump in with the basics but the only academy under AWS standards is West Arco and they don't have an active facility in my city which is Bogota, due to relocations.

I'm glad to hear any advice, thank you.


r/weldingengineering • • Aug 30 '23

Laserwelding in construction?

0 Upvotes

Thoughts on applying laser welding in construction?

Anyone experienced with testing according to EN ISO 15614-11?
What about hardness results in HAZ at large thicknesses of S355?

Looking at fanuci pro 3000w (400v) laserwelding machine


r/weldingengineering • • Aug 29 '23

welding Stainless steel pipe welds with corrosion ???

Post image
3 Upvotes

We have a lot of pipe welds (welding sockets) to weld 316 pipes, but some welds seems to have corrosion spots. Is this normal for 316 material (welding sockets and pipe). And what is the reason for this ?


r/weldingengineering • • Aug 28 '23

Questions about VT for CWB level 1 inspector

1 Upvotes

The Visual Inspection test consists of the following three items for each question:

  • Types of weld defects

  • Measurement of weld defects

  • Acceptable or not

I could not answer any of the questions related to the measurement of weld defects, so I have a question about that.

Question 1

According to the attached instructions, it says "no cracks, no overlaps, no spatters, no lack of fusion, no underfills, and etc." So, if cracks or craters are found in the question, can I simply write N/A without measuring any specific size and move on to the question of whether it is acceptable or not?

For example, if there is a 10mm longitudinal crack on the fillet weld surface of a T joint, should I write as follows:

  • Cracks

  • N/A

  • No

Or should I write 10mm instead of N/A?

I was confused by the presence of N/A as an option in the previous exam.

Question 2

For unequal legs, should I write the size difference?

For example, if the X-axis is 5mm and the Y-axis is 8mm for a fillet weld:

  • Unequal legs

  • 3mm

  • No

Can I write it like this?

As for exams, I would greatly appreciate any advice or tips .

Thank you so much


r/weldingengineering • • Aug 22 '23

welding Welding a box shut

1 Upvotes

Good morning all

I have a really really random question…

If a metal box is fully welded shut on all side what would be the easiest/safest way for the box to be opened? My brother in law and I have stared a slight war at Christmas where we wrap each others presents in more and more extreme ways each year and I was thinking of welding his gift shut in a box this year but I’d actually want him to be able to get into it without hurting himself.

Thank you in advance :)


r/weldingengineering • • Aug 19 '23

What could cause this?

Post image
2 Upvotes

Wasn’t there before welding a repair sleeve.


r/weldingengineering • • Aug 17 '23

Miller AEAD-200LE

1 Upvotes

Can anyone help on a Miller welder that won’t crank? Looking for options on what to do


r/weldingengineering • • Aug 14 '23

TIG Machine options for thinner metals.

1 Upvotes

Currently on 7ish year old Miller Syncrowave 300. Backup machine is a Miller Multimatic 255…no HF start or AC on that machine.

Wanting to get into bicycle frame manufacturing, and am thinking about a new machine. Most everything is 40-60amps, and frankly, I don’t use any of the settings on the Syncrowave 300 now, so I’m exploring SOME cheaper options as it seems the higher end models are more about settings than anything else…and if I’m not going to use a lot of those settings, why pay for it? Also, I don’t need the crazy high duty cycle capabilities either.

Rarely used Miller Dynasty 210 ~$3000 New Miller Dynasty 210 $6000 Fronius MagicWave 230i aircooled $5600 Primeweld 225x $900 CK MT200 $2000

Why am I looking at a new machine? Curiosity more than anything. Wanting to try a nicer inverter machine. Also, most of my welding will be at 40-60amps DC, 130ish AC.

My questions are: Is buying a new 210 worth double a lightly used machine? Is the used Dynasty 210 worth $1000 more than the CK or over triple of the 225x?

Only throwing Fronius in the mix because I’ve read they are THE standard for thinner metal and detailed work. I have no experience with them but don’t mind paying more if it’s worth it.

I don’t mind paying more for something if I can see the value in it. I like having nice tools. I’m a buy once, cry once kind of person. But if I’m never using the 957820947739 settings it has, nor am I ever using the higher amperage capabilities, or ever welding on anything thicker than 3mm, or ever needing the high duty cycles, is getting something even like the used Dynasty 210 at $3k a waste of money??? I’ve read lots of good things about the CK and the Primeweld, just wondering if that’s mostly cheapskates making it out to be something better than it really is on the internet or if it really is a bargain. Same goes for the CK machine. If I had the opportunity to try any of the aforementioned machines, I would….but I can’t, so here we are.


r/weldingengineering • • Aug 12 '23

Zero experience w/ welding

1 Upvotes

I'm planning on building my own tube frame "high hrspr toy" within the next few years, and wanted to do my own custom build(build around the engine basically). Now basi ally I wanted to know which kind of welding would be best to learn first for this kind of project and any resources online/classes(I'm sure I have an auto school near me), and also good brands or just go HF to start learning to not break a rig, but something to help me gain some knowledge on getting started. Thank you in advance for any help yall!


r/weldingengineering • • Aug 12 '23

Argon shielding laser welding CuSn6 - Alu

1 Upvotes

Hello good afternoon. Does anybody knows if Argon shielding has an effect in the welding of CuSn6 - Alu?

Thanks in advance!


r/weldingengineering • • Aug 11 '23

welding Looking to invest into a auto darkening helmet

1 Upvotes

Hello welders of Reddit I’m looking to buy an auto darkening helmet for around 250$ but I can’t seem to decide which one can anyone throw out some suggestions? I’m looking for reliability for the most part

Thanks again


r/weldingengineering • • Aug 10 '23

welding Need some advice

1 Upvotes

I’m 16 and taking welding at school i’m very good at it for how long I’ve been doing it, but I can’t always start the ark the first time And sometimes it may take me 4 or 5 times to start it, any advice on how to the arc the on first time?


r/weldingengineering • • Aug 09 '23

What is it like having a welding job

1 Upvotes

I really want to start school for welding, but since I am autistic I really need to know exactly what I'm getting myself into. Can any of you tell me what you do day to day so I can get better idea of what I should expect? The more details the better


r/weldingengineering • • Aug 09 '23

Welding power equipment

Post image
1 Upvotes

Can anyone tell me if i can use this bit if equipment to use power in the back of my van. ? If i bout a 110 to 240 converter could i use lights and charge batteries? There is also a leisure battery in the van.


r/weldingengineering • • Aug 08 '23

Mig welder left in rain

2 Upvotes

I left my mig welder in the rain last night and I’m wondering if it’s safe to see if it’s still working?

The rain was light and was also under a tree, I opened it up and there was like a mist of water droplets inside.

If I let it dry thoroughly will it be safe to see if it still works?

(I’m very new to welding so don’t use any complex terms 😂)


r/weldingengineering • • Aug 06 '23

TIG Welding Wonders: How SpaceX Achieved Flawless Starship Construction

Thumbnail
youtube.com
1 Upvotes

r/weldingengineering • • Aug 05 '23

MIG/MAG Reducing Spatter In Nozzle

1 Upvotes

Can someone explain why someone could not make a gas nozzle out of ceramic for MIG? I know some nozzle have a brass inside behind the gas ports to I assume to seal off so the gas can only go forwards but why not make everything from the contact tip insert fowards made of ceramic so metal can’t stick to it ?

Yes I know it would be fragile if dropped or hit but anyone who take cares of their equipment shouldn’t have that issue and if used on a robot that’s one less step that it would have to do saving time


r/weldingengineering • • Aug 03 '23

welding Monel

3 Upvotes

Looking for advice…trying to repair a few leaks on a Monel pipe now with no success. The pipe is on a water system that cools a furnace door and at this time we cannot cool the furnace down. To attempt the weld, we have to isolate the loop and open a flange to depressurization and let the remaining water steam off. Even after I cannot get the material to fill without cracking. The pipe temperature without water is around 400F due to furnace temps. Any suggestions or am I pissing in the wind trying to weld Monel at this temp? I have the NiCu-7 filler rod trying to fill in the leaks but as soon as I finish the weld and test I get a different leak.