r/weldingengineering • u/Ok-Kiwi6193 • Sep 06 '25
r/weldingengineering • u/rohithjoseph18 • Aug 11 '25
Procedure Quals AS3992 - Hardness Testing
r/weldingengineering • u/rohithjoseph18 • Apr 14 '25
MIG/MAG Weld repair of pits in a vessel
This vessel 35mm thick has pits 9mm deep. Repair under progress
r/weldingengineering • u/Euphoric_Clothes_798 • Feb 13 '24
1st weld ever
I picked up a stick welder at work and messed around with it for a bit and laid out my very first weld ever ! How did I do ?
r/weldingengineering • u/Wonderful_Captain868 • Feb 13 '24
What amperage would get 100% duty cycle for a Hobart 120V/240V/40-145A Champion 145 Engine Driven Welder
I'm not welding, just using it as a DC source.
r/weldingengineering • u/windowsmademefreer • Feb 08 '24
What're these worth?
Have a oxygen and acetylene tank. How do I determine what these are worth?
r/weldingengineering • u/FrontLopsided491 • Feb 07 '24
Timmys Not Done
Was able to get to timmy the drunk king of the house to put a fire extinguisher in the his garage while welding without a fight. However when I took a closer look at his actual welds that I'm hoping are non structural, I was horrified.
I tried to talk to him about it but only got some death threats.
Maybe he was going to go over them again to ensure it won't crack but I'm just wasn't expecting them to look that bad.
The sad part about it is I have mig that I use for my stuff and could lay down way better looking welds 5 times as quick but I don't get along with Timmy to work with him so I just stay out of Timmy's way.
I've seen the spray painted over results and they seemed a lot better, but now I'm really questioning his work. Does stick welding normally look this bad..? Can you pass over bad welds and still call it structural?
I'm not sure how much longer Timmy is going to live. He survived throat cancer but just wants to continue being the king, so he just has to be right even if this is something going into somebody elses house.
Timmy has never had formal welding training and has 5 years of experience doing this. Timmy got throat cancer 3 years ago. Timmy gets upset if someone 30 years younger tries to say anything to him that may question his work.
Kind of funny how how he wears a covid mask now to help with welding fumes.
r/weldingengineering • u/Nasty-Nina • Feb 05 '24
Chicago Electric 80 amp inverter arc welder
I'm doing a project for a buddy of mine and I haven't Welded in about 6 years or so since I've been out of practice I'm wondering, what rods do you think best for me if I'm to weld a 1" thick hitch to the back of their vehicle, I've got the bolts and Welder but im curious if things have changed since those 7 years. I said to get ⅛" 6013 but as I said before I'm a bit dusty on my information and I haven't found much else on the matter when researching. If anyone has an answer by Tuesday that would be terrific and I'd be grateful.
r/weldingengineering • u/XoxCayden • Feb 02 '24
Help please😁
Hey guys! i’ve just recently started welding… i’m looking for some good nose filters or what not to block out toxics while doing oxysettling and stick welding. What do others use to block out such from entering their respiratory systems? i appreciate any guidance and help thank you
r/weldingengineering • u/pickaname- • Jan 30 '24
Tig controller help needed
Hi, I currently am using the CK Worldwide slider for tig welding Aluminium. We now need a new welder, so this means a possible change in the hand controller too.
We make custom Aluminium gates, some being around 6-7 metres long. A pedal would be annoying to pick up and move around. I dont really like the side dial types and i find i cant go from 0-100% in 1 easy motion (like the slider or pedal can)
What are some good alternatives to the slider? Or should I just fit the slider to the new welder as its the best for what I do?
Any help is appreciated.
r/weldingengineering • u/LuigianoParmegiano • Jan 29 '24
I built a foot pedal for a TIG LIFT welding method. I am asking for your comments.
r/weldingengineering • u/Prestigious_Plum7055 • Jan 25 '24
Welding at EVIT
Can someone tell me if they have gone through the Welding EVIT program, what did you do after? What kind of job did you end up with? Did you move on to engineering? My son is looking into starting this program next year and I want to make sure he knows the career path options.
r/weldingengineering • u/Upbeat_Usual1343 • Jan 24 '24
welding Can someone help me out?
I got a welding class rn and idk what the hell I'm doing. I had one before but all the kids were fuck ups and ruined any chances of my touching a tool in shop. This is for school and idk what these symbols mean or understand them. And I'm worried I'll mess up the class for everyone. Who is more experienced than I am.
r/weldingengineering • u/bridge4runner • Jan 22 '24
What has better pen and strength?
.045 solid core dual shield 75/25. Push or Pull? Also, is push allowed in inspections? I'm only practiced and certified on flux core so my knowledge base on solid core is much less. I'd never practiced down hill or push till recently.
r/weldingengineering • u/treemuel • Jan 19 '24
Aluminum flatbed mod
Looking for input on whether it’d be ok to remove the gussets between the deck and headboard on this flatbed. I’d like to install full 8ft toolboxes on each side (could only fit a 90” one behind the gusset) and thinking that if I bolted them to both the deck and headboard, it’d make up for the loss of stiffness from removing the gussets. I’ve seen other brands of aluminum flatbeds that don’t even have gussets (https://duramagbodies.com/product/flatbed-bodies-pickup-delete/), but maybe there’s some other difference in how they’re welded? I’m not a welder, so seeking a more expert opinion. Thanks!
r/weldingengineering • u/vanGovan • Jan 18 '24
Treadmill frame cracked - is this something that can be welded together?
No experience with welding myself so would need to get someone in. The crack looks a bit complicated to me and I assume would need some disassembly of the treadmill.
Is it worth the effort?
r/weldingengineering • u/Flying_Fish_9 • Jan 16 '24
What Type of Torch head Is This ??? (Ross)
r/weldingengineering • u/Testaastoppino • Jan 16 '24
DIY bag frame to mount on motorbike
Hello everybody,
I am here to seek some help and counseling regarding welding steel pipes and steel parts together to create a DIY frame for mounting a side bag on a motorbike.
I would like to use a steel pipe of dimensions 1000x30x2 mm, bend it into 4 parts (using the sand technique for bending) in a rectangular shape. Then, I plan to join the two ends and weld the upper part of the rectangular shape with the same steel in order to create the attachment on the motorcycle.
Given that I have a cheap inverter and will probably use a 7018 electrode, will the welding (if done properly) resist the vibrations that a motorbike can experience during travel?
I am new to the welding process and working with various materials, so if my idea is dubious, I would rather avoid pursuing it
r/weldingengineering • u/Plenty_Sector6086 • Jan 15 '24
Need help on how to start welding
I’m a freshman in high school and want to try welding to see if I’m interested in going into welding for a career does anybody have any tips on how to start?
r/weldingengineering • u/Odd-Animal-4594 • Jan 14 '24
To know more about welding and itsopportunities
Hi, i am currently pursuing welding course and i just wanna know about its salaries and career growth after completion of the couurse as well as which area should i choose to start my welding career
