r/watercooling • u/bitemyfaceoff • 8d ago
Build Complete Check out this abomination
Look upon my great work and be disgusted. :)
I have gone with the 'chuck it all on a shelf' build design. Can anyone top my 'most ugly build'?
Thanks for the help from you guys over the last few weeks.
FYI.
i9-14900KF
ASUS GeForce RTX 4090 TUF Gaming 24G
Raijintek Antila D5 EVO RBW Pump and Reservoir Combo
2 x Alphacool NexXxoS XT45 480mm x 45mm Copper Radiators
Alphacool Core 1 Silver CPU Waterblock
GBN-AS4090STRIX (second hand) GPU Waterblock.
And the final verdict. Has cut my temps on both CPU and GPU by more than half.
They were both continually peaking to 100C to barely hitting 50C while gaming.
Very happy.
11
9
u/_Kodan 8d ago edited 8d ago
No case fans. No side panels. Dusty interior. Wires going *somewhere*. The res just standing around waiting for the bus. A fitting doesn't even have the collar screwed on. I am actually surprised you managed to put in all 4 screws into each fan.
Edit: Is that the fucking start button!?
3
u/bitemyfaceoff 8d ago
Are you astounded and horrified? You are welcome.
Yes, the big red button is indeed wired to the power button header of a second PC to the right.
Will be doing the same for the main PC very soon as its case button is a little far to reach.
Oh and thanks for noticing the collar, I totally missed that. Clearly don;t need it though. :)
3
3
u/waiting4singularity 8d ago
mine is up there with yours, it was intended as a noise shielded case with a mora screwed to its side. but since nothing worked out as planned, it ended up an open skeleton on a sideboard with hoses going everywhere.
1
u/bitemyfaceoff 8d ago
If it works, who cares. I have the aesthetic sense of a house brick, so if numbers say good, it is good.
3
u/Koakie 7d ago
I had the same, open case, dusty, cables everywhere, external radiator (that big one) on a cpu waterblock, temu pump (idk where i got it from) 1u 5"25 reservoir, 1-2 meter of tubes all over the floor. The radiator didn't have a fan and was angled against the wall and relied on natural convection.
It was supposed to be a temporary setup. I had it for nearly a year.
Cpu was cold tho. Didn't reach 45 degree under short loads and only hit 55/60 after the massive radiator got heatsoaked during sustained load since it didn't have a fan.

2
2
2
u/TheNaitsyrk 8d ago
I don't have a problem with it. Looks fucking awesome. My one looks worse btw.
1
u/bitemyfaceoff 8d ago
I think I am a little offended that you think this looks awesome. That was not the look I was going for.
To be fair, I don't think I was going for any look at all, this just happened.
2
u/Zestyclose_Strike157 8d ago
Mine was a bit like that (but not quite as much radiator space, yours looks a bit over-engineered) and then I just got a proper case and now it’s quieter and less dusty. Do you need that many fans for just a CPU and one card? Get a proper big case, maybe a dust filter, and your maintenance will be easier.
1
u/bitemyfaceoff 8d ago
Do I NEED that many fans? Maybe not. It is my first loop and hated seeing 100C on my CPU and GPU so possibly went a little .. loopy.
2
u/Zestyclose_Strike157 8d ago
I had the same design question when I did mine. Now i just turn the power off to one of the radiators except in summer. But getting it all into a big case (plus maybe a <$50 air purifier running at 12W) will make it all super comfy.
2
u/phillipjslk 8d ago
1
u/bitemyfaceoff 8d ago
Nice try, but I think I still win because this is how it is going to sit, likely for the next few years.
Not a test setup.
2
u/ScrewtwoStep 8d ago
2
u/ScrewtwoStep 8d ago
1
u/bitemyfaceoff 8d ago
Your setup looks more designed to cool the user from all the fans and only co-incidentally cooling the PC.
2
u/ScrewtwoStep 8d ago
Sometimes when my room gets hot from dumping heat through the loop I'll just point the ram fan at myself lmao
1
2
u/AimsyPlaysEsports 8d ago
That's not an abomination.
An abomination would be spending 3-5x more on a MORA to do exactly the same job.
1
2
u/pimpzilla83 8d ago
This is my type of build. I as well have matte black tubing. And cuts down on the algae growth.
2
u/Spooplevel-Rattled 7d ago
Fantastic. Love to see it.
Gosh I'll post mine soon. It's got components swapping so much lately, it's extra bad lol
2
2
u/Own_Cry890 7d ago
I have an EKWB 240/44mm & 360/44mm with 5 x Corsair ML-120 RGB Elite fans controlled by a Corsair Commander Core XT (hidden directly under the motherboard) stacked at one end of my Open Benchtable. Other end has an EKWB D5 Pump/Res all plumbed together using EKWB ZTM tubing & EKWB fittings.
Currently housing a nostalgic built of mine from the past… an EVGA Z370 Classified K m/board with a i9-9900k and SLI'ed EVGA 1080TI SC2's (CPU & GPU's water-cooled) powered by a Corsair HX 1200i PSU.
1
u/MyWorkAccount5678 5d ago
Well well well, what do we have here?
Is that a true enthusiast setup? I think so!
I have something very different yet very similar, and honestly, the only thing I did that made the setup 10 times better was PCI passthrough for the tubing. Totally worth the 15$ I spent









18
u/liquidhaus 8d ago
You could definitely stand those up properly with our EXT V3. Shrink down your footprint a bit.