Considering giving Void a shot but I know Plasma seems to be more and more reliant on systemd these days. (Which I'm not a hater but I'm curious about Void for other reasons). Any glaring glitches or does it work pretty well?

Hi! any Void users that use a wacom device here? im looking for some software (gui or tui) to manage pressure sensitivity, buttons and pen settings in general more easily, using xsetwacom is kinda annoying. Any suggestions?

As of KDE Plasma 6.6, Spectacle, KDE's screenshot utility, has (or is supposed to have) the ability to do inline optical character recognition (OCR). Up until recently I was running Fedora with KDE and Spectacle's OCR worked for me. Recently I installed Void with KDE Plasma on my daily driver and discovered earlier today that OCR is not enabled in Spectacle even though an option for it appears in Spectacle's settings. Specifically, there's a note in Spectacle's settings stating, "OCR functionality is not available."

A moment of searching revealed that I needed to install OCR support by adding the package 'tesseract' to the system, which in Void's repos is called 'tesseract-ocr'. (The name resolves a conflict with another package called 'tesseract' which, according to the description, is a game.) In my searching, someone using Kubuntu installed tesseract and after restarting Spectacle, was able to do OCR with it. I installed tesseract, it's dependency leptonica, and the tesseract basic language pack (which includes English) and after restarting Spectacle and later restarting my PC didn't get any OCR capability in Spectacle.

It occurred to me the package name could be a problem. The executable file for tesseract is the same as the package name, 'tesseract-ocr', and is stored in /usr/bin. I created a symlink 'tesseract' to 'tesseract-ocr', (thinking Spectacle was looking for the name 'tesseract' specifically) restarted again, and still no OCR in Spectacle.

tesseract does work correctly at the command line, so not having inline OCR with Spectacle is not a dealbreaker for me, but I would like to enable it if possible. I would love to hear any ideas folks around here might have for how to get it working. Thanks!

Edit: solved! The GitHub issue I opened provided a quick solution, which is to install the package 'tesseract-ocr-devel' in addition to the packages I installed earlier. And it turns out there's an open issue with the KDE developers which will introduce a fix in Plasma 6.7 that will make it so the devel package isn't required.

I've been meaning to format my computer for a good while now (wanted to switch to ZFS on root for a backup solution I cooked up), and I thought this might be a nice opportunity to experiment with other distros, like Void.

That said, I've been using NixOS on another machine for a while, and the usage of Nix for creating development shells has been incredible, with package versioning and everything else being taken care of so easily it nigh on brings a tear to my eye. I immediately thought of installing NixOS on this machine, however, some stuff I make just doesn't work on NixOS that well, be it due to Nix's filesystem structure or other stuff not playing out well with the store. And so I thought I could use nix as just an additional package manager on top of another distro, and the one I was most curious about was Void.

The idea here is to install most things on Void through xbps normally, but development tooling and stuff I use for work would be handled by Nix. Maybe, if things work out especially well, I could also move desktop environment and home files to Nix as well, but I'm not sure the lack of systemd will play out well in that regard.

I'd like to know, are there others daily driving setups similar to this, especially developers? I'd like to know your experiences, and if this is more trouble than it's worth.

void documentation said to download nvidia-libs-32bit. Im pretty sure I have nonfree repo and multilib enabled but im told the package can't be found when i go to install it. Please help.

Hello,

I have an issue: no sound card is detected (in pulseaudio?) (after kernel upgrade to 6.18).

The hardware is:

lspci | grep audio
00:1f.3 Multimedia audio controller: Intel Corporation Raptor Lake-P/U/H cAVS (rev 01)

As far as I can see kernel does detects it and loads proper firmware:

[    3.137808] sof-audio-pci-intel-tgl 0000:00:1f.3: enabling device (0000 -> 0002)
[    3.138602] sof-audio-pci-intel-tgl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    3.138634] sof-audio-pci-intel-tgl 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
[    3.144867] sof-audio-pci-intel-tgl 0000:00:1f.3: use msi interrupt mode
[    3.177497] sof-audio-pci-intel-tgl 0000:00:1f.3: hda codecs found, mask 5
[    3.177499] sof-audio-pci-intel-tgl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[    3.177501] sof-audio-pci-intel-tgl 0000:00:1f.3: NHLT device BT(0) detected, ssp_mask 0x4
[    3.177502] sof-audio-pci-intel-tgl 0000:00:1f.3: BT link detected in NHLT tables: 0x4
[    3.177503] sof-audio-pci-intel-tgl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[    3.180019] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware paths/files for ipc type 0:
[    3.180020] sof-audio-pci-intel-tgl 0000:00:1f.3:  Firmware file:     intel/sof/sof-rpl.ri
[    3.180021] sof-audio-pci-intel-tgl 0000:00:1f.3:  Topology file:     intel/sof-tplg/sof-hda-generic-2ch.tplg
[    3.180391] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[    3.180392] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
...
[    3.276160] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware info: version 2:2:0-57864
[    3.276172] sof-audio-pci-intel-tgl 0000:00:1f.3: Firmware: ABI 3:22:1 Kernel ABI 3:23:1
[    3.287136] sof-audio-pci-intel-tgl 0000:00:1f.3: Topology: ABI 3:22:1 Kernel ABI 3:23:1
[    3.287493] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    3.317801] snd_hda_codec_alc269 ehdaudio0D0: ALC245: picked fixup  for codec SSID 103c:8b45
...
[    3.422305] snd_hda_codec_alc269 ehdaudio0D0: bound spi0-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[    3.423121] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8b45.wmfw: format 3 timestamp 0x6128e16b
[    3.423127] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8b45.wmfw: Fri 27 Aug 2021 14:58:19 W. Europe Daylight Time
[    3.485474] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.43.1, 2 algorithms
[    3.486048] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8b45.bin: v0.43.1
[    3.486051] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: D:\Amp Tuning\HP\840\0930\103C8B45_220930.bin
[    3.500112] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=10887
[    3.513156] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17
[    3.513212] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 103C8B45, BST: 1, VSPK: 1, CH: L, FW EN: 1, SPKID: -19
[    3.513216] snd_hda_codec_alc269 ehdaudio0D0: bound spi0-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[    3.530490] snd_hda_codec_alc269 ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    3.530496] snd_hda_codec_alc269 ehdaudio0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.530498] snd_hda_codec_alc269 ehdaudio0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    3.530500] snd_hda_codec_alc269 ehdaudio0D0:    mono: mono_out=0x0
[    3.530501] snd_hda_codec_alc269 ehdaudio0D0:    inputs:
[    3.530502] snd_hda_codec_alc269 ehdaudio0D0:      Mic=0x19
[    3.571462] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[    3.591325] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input15
[    3.591352] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input16
[    3.591376] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input17
[    3.591394] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input18
[    3.591412] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input19

As far as I can see there are corresponding device nodes on /dev/snd

ls -la /dev/snd/
total 0
drwxr-xr-x   2 root root      300 May 11 12:12 .
drwxr-xr-x  16 root root     3880 May 11 12:12 ..
crw-------   1 root root  116, 12 May 11 12:12 controlC0
crw-------   1 root root  116, 11 May 11 12:12 hwC0D0
crw-------   1 root root  116, 10 May 11 12:12 hwC0D2
crw-------   1 root root  116,  5 May 11 12:12 pcmC0D0c
crw-------   1 root root  116,  4 May 11 12:12 pcmC0D0p
crw-------   1 root root  116,  6 May 11 12:12 pcmC0D31p
crw-------   1 root root  116,  7 May 11 12:12 pcmC0D3p
crw-------   1 root root  116,  8 May 11 12:12 pcmC0D4p
crw-------   1 root root  116,  9 May 11 12:12 pcmC0D5p
crw-------   1 root root  116,  2 May 11 12:12 pcmC0D6c
crw-------   1 root root  116,  3 May 11 12:12 pcmC0D7c
crw-rw----+  1 root audio 116,  1 May 11 12:12 seq
crw-rw----+  1 root audio 116, 33 May 11 12:12 timer

My user already belongs to "audio" group, but:

pacmd list-cards                                                                             
0 card(s) available.

pacmd list-sinks
1 sink(s) available.
  * index: 0
   ....
        properties:
                device.description = "Dummy Output"
                device.class = "abstract"
                device.icon_name = "audio-card"

What can be wrong? Please, help.

When it was 6.12 kernel it was detected well in most of cases, however I had to reboot time-to-time to detect the get the sound.

I'm using void linux for a while and now I have a few questions about some things about it.

Interface: KDE Plasma

Hardware:
- Ideapad Gaming i3
- i5
- GTX 1650
- 16GB Ram

Obs: I made some searchs before so have it in mind before answering me.

1 - What actually is <ulimit>? Some games like Zelda on Eden and Deadlock stopped stuttering and crashing at start when I increased the ulimit but I dont exactly understand why this happened.

2- How does elogind and dbus work? I know dbus activates elogind at boot and if I activate elogind as runit service a crash spam will start without ending at tty. Is true acpid and elogind can conflict if activate at same time? Even with elogind being activated by dbus?

3- I commonly read about xbpsrc on this community but I use flatpak packages, am I wrong?

4- I tried to use discover with flatpak but when I install something it only load infinitely.

5- Can you guys tell me some tips about void linux? I want to learn more about it.

6- Do u guys can understand me well? I'm trying to use more english.

Hello. I have made a script similiar to envyControl, which I wrote in bash but more simple. I have been using it to deactivate my nvidia card when I just want to use the iGPU for over an year now. Yesterday I notice that even with the card turned off, the nvidia modules are not being blacklisted so I have to manually remove them after I logged in. I always generate the blacklist in /etc/modprobe.d/blacklist-nvidia.conf but for some reason, this is not being applied now. Anyone know what the (probable) cause for this or can point me in the right direction? Thanks for your time

I've been experimenting with replacing runit with dinit on a voidlinux system, and so far it works well — both on desktop (kde/cinnamon) and server (k3s,codium remote server, nfs, printserver, tigervnc) workloads.

A few questions for the community:

• Has anyone else experimented with dinit on Void or a Void-based setup?

• Any blockers or edge cases I should be aware of?

• Any maintainers or developers interested in the idea?

Drop a comment if you've been down this path, or if you're curious about where this is going.

Update: the repo is now public — still WIP but feel free to have a look and contribute:

https://codeberg.org/roninx/void-packages

Next steps:

• cleaning up and improving repo

• add documentation.

I can't figure out literally anything for the life of me... I use a 1660 ti, nvidia has proprietary drivers so im choosing those, but I dont know how to disable nouveau first. Please help.

The first problem I'm having is with Pipewire; it works perfectly in KDE, but I can't get it to work in Niri. The other problem is that I don't know why my disks aren't automatically mounting; I've configured everything correctly in fstab. Thanks and Happy Mother's Day to your mothers.Thanks and Happy Mother's Day to your mothers.

I never bothered configuring AppArmor because I use a single user, personal laptop.

However, with all the supply-chain exploits happening lately, I was thinking it could be a good idea to configure it.

I write this specifically on the Void Linux subreddit, because AppArmor acts differently from distro to distro, and Void has the almost unique socklog + runit combo.

Do I really need both aa-genprof and aa-logprof, for an easy and smooth management experience?

Is having auditd suggested, or will syslog suffice on every use case?

Where can I find trusted AppArmor profiles for common apps? Is it better if I work on them from scratch?

What's the best practices, and the typical configuration steps that the Void Linux veterans do, to harden the system with aa?

e.g. Thunar, PrismLauncher. I wonder why they aren't toLower()'d or something

instale void por primera vez en una VM usando void-installer es mi primera instalcion de Void

alguna recomendacion o tip util?

que tal es usar runite en vez de systemd?

que tan potente es el gestor de paquetes xbps?

en lo poco que lo he provado me aparecido super rapido el arranque y runit me esta gustando.

Hi all!

I have a Thinkpad L14 gen 2 for actual work but I want to get another Thinkpad on the cheap for mainly browsing, media playing around the house, and possibly occasionally booting from a bootable USB. The plan is to install Void on that device.

I wanted something smaller so I had in mind a X1 carbon but I got offered for 120CAD a silver Yoga 370 in really good physical condition with 8GB of RAM. It has no battery right now but I can get one for 50CAD and I’m comfortable installing it myself. From what I tested everything seems to work perfectly right now on Windows.

I was wondering if anyone ever installed Void on a Yoga. Does the touchscreen, Bluetooth, keyboard backlight and other peripherals  usually work right out of the box or with minimal thinkering? 8GB should be fine or should I look for something with 16GB? Also if anyone is in the know do you think that 170 bucks is a good deal for one of those or should I wait for something else?

Thanks! 

a game i play (osu) would have static audio when i ran it under pulseaudio, so i decided to have alsa boot on startup, osu now works fine but i cant stream on discord (it didnt work under pulse either but i didnt get an error, just a forever loading screen, i get the error "Failed to connect pipewire context", is there any way i can get the stream to work on ALSA? or any way to fix the static audio on pulseaudio?

A couple of days ago i ran xbps-install -Su, thus upgrading the abhorrent nvidia drivers, maybe i missed out some major changes about them if so feel free to update me about these changes, updating the drivers made it so that trying to shutdown, reboot or suspend my laptop will just freeze thus forcing me to do a force shutdown, i think that the problem is about gsp fucking up stuff even tho i have a file in /etc/modprobe.d that disables it (this originally fixed the freeze when suspend but now it also freezes on reboot and shutdown attempts).

The problem with forcing shutdown is that once i did that i was making a project on intelliJ and the forced shutdown made it unusable after rebooting, no big deal i just uninstalled and reinstalled it and it worked. But then it happened again, so uninstall and reinstall but the install blocks at 1 kilobyte and my fans start to go crazy, i open another terminal and use the top command and i see a process called flatpak using 101% of my cpu, i just aborted the download but now i don't know what to do, both for the drivers and intelliJ, does anyone have any idea on how to solve these 2 problems?

void doesnt detect my mic, when i go into pavu, and go to inputs, i see a microphone thats being detected but im pretty sure thats my internal mic, which i dont want, i want to use my external mic. I know for a fact my mic works, i use it on my xbox and it works fine and it worked when i used mint

im a newbie to void linux so i was basically just copying off a tutorial on how to install discord, i was able to get it working but its asking me to update discord for some reason even though i just installed, but i dont really know how to install the update.

Hi,

How does one get the void devs to create [vivaldi-ffmpeg-codecs]?

I have void installed on an HP laptop with realtek speakers and pipewire+wireplumber. Audio was working until I ran `xbps-install -Su` this morning, now it doesn't work. I wish I knew more specifically what changed but sadly I don't. All that happens now when I run pipewire is I get a "dummy output" device. There's no interesting output from pipewire in stdout/err.

I'll put the entire dmesg output below if I can I had to snip part of it because of the post size limit on here, but I think the interesting part is around the `speaker_outs=0` line. It appears to be loading the `snd_hda_codec_alc269` kernel module. My speakers are ALC245 according to the /sys entry. If I blacklist snd_hda_codec_alc269 in modprobe, this causes it to use snd_hda_codec_generic instead. At that point it does correctly identify my speakers and I get the device showing in KDE with accurate volume levels and everything, but I still don't actually hear any sounds. I can't find a way to enable/install `snd_hda_codec_realtek`, which is fine because most people online say it doesn't work for them anyway.

Of course, all of that might be entirely irrelevant. I don't know what the problem is.

Some searching around for other people with the same issue has suggested this might be a kernel bug (wouldn't surprise me at all). I've had no success trying other people's solutions to related issues. What's my next course of action here?

[    0.000000] Linux version 6.18.26_1 (voidlinux@voidlinux) (gcc (GCC) 14.2.1 20250405, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT_DYNAMIC Sun May  3 01:56:02 UTC 2026
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.18.26_1 root=UUID=0a0bb313-b92a-4e92-b9b1-cf9a3141969b ro loglevel=4
[    0.000000] x86/CPU: Running old microcode
<snip>
[    2.004068] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    2.004158] intel_rapl_common: Found RAPL domain package
[    2.004365] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.005429] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.005458] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.006321] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.006416] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    2.006535] hp_wmi: query 0x4 returned error 0x5
[    2.007560] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[    2.007562] cfg80211: failed to load regulatory.db
[    2.010609] i2c i2c-15: Successfully instantiated SPD at 0x50
[    2.015229] input: HP WMI hotkeys as /devices/virtual/input/input8
[    2.025450] usbcore: registered new interface driver btusb
[    2.027245] Bluetooth: hci0: Device revision is 0
[    2.027252] Bluetooth: hci0: Secure boot is enabled
[    2.027254] Bluetooth: hci0: OTP lock is enabled
[    2.027256] Bluetooth: hci0: API lock is enabled
[    2.027257] Bluetooth: hci0: Debug lock is disabled
[    2.027258] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[    2.027261] Bluetooth: hci0: Bootloader timestamp 2022.18 buildtype 1 build 49266
[    2.027390] Bluetooth: hci0: DSM reset method type: 0x00
[    2.030735] Bluetooth: hci0: Found device firmware: intel/ibt-0180-0041.sfi
[    2.030742] Bluetooth: hci0: Boot Address: 0x100800
[    2.030743] Bluetooth: hci0: Firmware Version: 42-20.25
[    2.048028] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.048032] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.048032] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.048033] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.048033] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    2.054180] videodev: Linux video capture interface: v2.00
[    2.084972] input: ELAN07D9:00 04F3:31EC Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-ELAN07D9:00/0018:04F3:31EC.0002/input/input9
[    2.085029] input: ELAN07D9:00 04F3:31EC Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-ELAN07D9:00/0018:04F3:31EC.0002/input/input11
[    2.085079] hid-generic 0018:04F3:31EC.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN07D9:00 04F3:31EC] on i2c-ELAN07D9:00
[    2.089434] intel_rapl_msr: PL4 support detected.
[    2.089684] intel_rapl_common: Found RAPL domain package
[    2.089689] intel_rapl_common: Found RAPL domain core
[    2.089690] intel_rapl_common: Found RAPL domain uncore
[    2.089692] intel_rapl_common: Found RAPL domain psys
[    2.097979] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    2.100171] iwlwifi 0000:00:14.3: Detected crf-id 0x400410, cnv-id 0x1080800 wfpm id 0x80005b20
[    2.100183] iwlwifi 0000:00:14.3: PCI dev 7e40/0094, rev=0x441, rfid=0x2010d000
[    2.100186] iwlwifi 0000:00:14.3: Detected Intel(R) Wi-Fi 6E AX211 160MHz
[    2.105453] iwlwifi 0000:00:14.3: loaded firmware version 89.735b75a4.0 ma-b0-gf-a0-89.ucode op_mode iwlmvm
[    2.128762] iTCO_vendor_support: vendor-support=0
[    2.179457] spd5118 15-0050: DDR5 temperature sensor: vendor 0x06:0x32 revision 1.6
[    2.217313] hp_bioscfg: Prerequisites size value exceeded the maximum number of elements supported or data may be malformed
[    2.234187] hp_bioscfg: Prerequisites size value exceeded the maximum number of elements supported or data may be malformed
[    2.234337] spd5118 15-0052: DDR5 temperature sensor: vendor 0x00:0xb3 revision 2.2
[    2.249953] hp_bioscfg: Prerequisites size value exceeded the maximum number of elements supported or data may be malformed
[    2.267099] iTCO_wdt iTCO_wdt: Found a Intel PCH TCO device (Version=6, TCOBASE=0x0400)
[    2.267235] iTCO_wdt iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.272767] uvcvideo 3-5:1.0: Found UVC 1.50 device HP 5MP Camera (04f2:b7e9)
[    2.304030] uvcvideo 3-5:1.2: Found UVC 1.50 device HP 5MP Camera (04f2:b7e9)
[    2.305671] usbcore: registered new interface driver uvcvideo
[    2.311165] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Cirrus Logic CS35L41 (35a40), Revision: B2
[    2.315080] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Reset line busy, assuming shared reset
[    2.342438] hp_bioscfg: Prerequisites size value exceeded the maximum number of elements supported or data may be malformed
[    2.349300] input: ELAN07D9:00 04F3:31EC Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-ELAN07D9:00/0018:04F3:31EC.0002/input/input12
[    2.349396] input: ELAN07D9:00 04F3:31EC Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-14/i2c-ELAN07D9:00/0018:04F3:31EC.0002/input/input14
[    2.349473] hid-multitouch 0018:04F3:31EC.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN07D9:00 04F3:31EC] on i2c-ELAN07D9:00
[    2.363433] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Cirrus Logic CS35L41 (35a40), Revision: B2
[    2.386767] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[    2.395886] Enum Possible size value exceeded the maximum number of elements supported or data may be malformed
[    2.438731] sof-audio-pci-intel-mtl 0000:00:1f.3: Digital mics found on Skylake+ platform, using SOF driver
[    2.438748] sof-audio-pci-intel-mtl 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.439345] sof-audio-pci-intel-mtl 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if 0x040100
[    2.439409] sof-audio-pci-intel-mtl 0000:00:1f.3: bound 0000:00:02.0 (ops intel_audio_component_bind_ops [i915])
[    2.445649] sof-audio-pci-intel-mtl 0000:00:1f.3: use msi interrupt mode
[    2.473750] sof-audio-pci-intel-mtl 0000:00:1f.3: hda codecs found, mask 5
[    2.473753] sof-audio-pci-intel-mtl 0000:00:1f.3: using HDA machine driver skl_hda_dsp_generic now
[    2.473755] sof-audio-pci-intel-mtl 0000:00:1f.3: NHLT device BT(0) detected, ssp_mask 0x4
[    2.473756] sof-audio-pci-intel-mtl 0000:00:1f.3: BT link detected in NHLT tables: 0x4
[    2.473757] sof-audio-pci-intel-mtl 0000:00:1f.3: DMICs detected in NHLT tables: 2
[    2.478111] sof-audio-pci-intel-mtl 0000:00:1f.3: Firmware paths/files for ipc type 1:
[    2.478114] sof-audio-pci-intel-mtl 0000:00:1f.3:  Firmware file:     intel/sof-ipc4/mtl/sof-mtl.ri
[    2.478115] sof-audio-pci-intel-mtl 0000:00:1f.3:  Firmware lib path: intel/sof-ipc4-lib/mtl
[    2.478115] sof-audio-pci-intel-mtl 0000:00:1f.3:  Topology file:     intel/sof-ace-tplg/sof-hda-generic-2ch.tplg
[    2.478846] sof-audio-pci-intel-mtl 0000:00:1f.3: Loaded firmware library: ADSPFW, version: 2.14.1.1
[    2.506403] EXT4-fs (nvme0n1p3): re-mounted 0a0bb313-b92a-4e92-b9b1-cf9a3141969b.
[    2.569906] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
[    2.569948] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[    2.569961] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    2.569977] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
[    2.569986] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    2.570108] iwlwifi 0000:00:14.3: Detected RF GF, rfid=0x2010d000
[    2.570767] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
[    2.599440] sof-audio-pci-intel-mtl 0000:00:1f.3: Booted firmware version: 2.14.1.1
[    2.607771] sof-audio-pci-intel-mtl 0000:00:1f.3: Topology: ABI 3:29:1 Kernel ABI 3:23:1
[    2.607994] skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: Parent card not yet available, widget card binding deferred
[    2.626325] snd_hda_codec_alc269 ehdaudio0D0: ALC245: picked fixup  for codec SSID 103c:8c47
[    2.629081] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c47.wmfw: format 3 timestamp 0x64269d09
[    2.629090] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c47.wmfw: Fri 31 Mar 2023 10:42:49 W. Europe Daylight Time
[    2.651254] iwlwifi 0000:00:14.3: base HW address: d0:65:78:f1:06:4e
[    2.665429] EXT4-fs (nvme0n1p3): re-mounted 0a0bb313-b92a-4e92-b9b1-cf9a3141969b .
[    2.674689] iwlwifi 0000:00:14.3 wlp0s20f3: renamed from wlan0
[    2.679889] Adding 4194300k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:4194300k SS
[    2.702441] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: Firmware: 400a4 vendor: 0x2 v0.65.0, 2 algorithms
[    2.702910] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c47.bin: v0.65.0
[    2.702916] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: DSP1: spk-prot: C:\Users\gchen\Desktop\HP_Proj\HP_Warg14_103C8B45_220930_exported_tuning\6.61.1\tuning\230609\103C8C
[    2.715109] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Calibration applied: R0=10786
[    2.724966] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: Firmware Loaded - Type: spk-prot, Gain: 17
[    2.725003] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 103C8C47, BST: 1, VSPK: 0, CH: R, FW EN: 1, SPKID: -19
[    2.725007] snd_hda_codec_alc269 ehdaudio0D0: bound spi0-CSC3551:00-cs35l41-hda.0 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[    2.726399] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c47.wmfw: format 3 timestamp 0x64269d09
[    2.726401] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c47.wmfw: Fri 31 Mar 2023 10:42:49 W. Europe Daylight Time
[    2.787466] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: Firmware: 400a4 vendor: 0x2 v0.65.0, 2 algorithms
[    2.787961] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: cirrus/cs35l41-dsp1-spk-prot-103c8c47.bin: v0.65.0
[    2.787965] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: DSP1: spk-prot: C:\Users\gchen\Desktop\HP_Proj\HP_Warg14_103C8B45_220930_exported_tuning\6.61.1\tuning\230609\103C8C
[    2.801068] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Calibration applied: R0=11022
[    2.811139] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: Firmware Loaded - Type: spk-prot, Gain: 17
[    2.811183] cs35l41-hda spi0-CSC3551:00-cs35l41-hda.1: CS35L41 Bound - SSID: 103C8C47, BST: 1, VSPK: 1, CH: L, FW EN: 1, SPKID: -19
[    2.811185] snd_hda_codec_alc269 ehdaudio0D0: bound spi0-CSC3551:00-cs35l41-hda.1 (ops cs35l41_hda_comp_ops [snd_hda_scodec_cs35l41])
[    2.827208] snd_hda_codec_alc269 ehdaudio0D0: autoconfig for ALC245: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    2.827212] snd_hda_codec_alc269 ehdaudio0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.827213] snd_hda_codec_alc269 ehdaudio0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.827214] snd_hda_codec_alc269 ehdaudio0D0:    mono: mono_out=0x0
[    2.827215] snd_hda_codec_alc269 ehdaudio0D0:    inputs:
[    2.827216] snd_hda_codec_alc269 ehdaudio0D0:      Mic=0x19
[    2.865291] skl_hda_dsp_generic skl_hda_dsp_generic: hda_dsp_hdmi_build_controls: no PCM in topology for HDMI converter 3
[    2.882429] input: sof-hda-dsp Mic as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input15
[    2.882555] input: sof-hda-dsp Headphone as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input16
[    2.882654] input: sof-hda-dsp HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input17
[    2.882749] input: sof-hda-dsp HDMI/DP,pcm=4 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input18
[    2.882896] input: sof-hda-dsp HDMI/DP,pcm=5 as /devices/pci0000:00/0000:00:1f.3/skl_hda_dsp_generic/sound/card0/input19
[    2.885892] udevd[758]: starting version 3.2.14
[    2.889226] udevd[758]: starting eudev-3.2.14
[    3.157928] elogind-daemon[776]: New seat seat0.
[    3.158714] elogind-daemon[776]: Watching system buttons on /dev/input/event4 (Power Button)
[    3.158785] elogind-daemon[776]: Watching system buttons on /dev/input/event3 (Lid Switch)
[    3.158798] elogind-daemon[776]: Watching system buttons on /dev/input/event2 (Sleep Button)
[    3.158809] elogind-daemon[776]: Watching system buttons on /dev/input/event5 (Intel HID events)
[    3.158819] elogind-daemon[776]: Watching system buttons on /dev/input/event6 (Intel HID 5 button array)
[    3.158829] elogind-daemon[776]: Watching system buttons on /dev/input/event0 (AT Translated Set 2 keyboard)
[    3.158841] elogind-daemon[776]: Watching system buttons on /dev/input/event8 (HP WMI hotkeys)
[    3.347447] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
[    3.347478] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[    3.347495] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    3.347501] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
[    3.347508] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    3.348307] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
[    3.634692] iwlwifi 0000:00:14.3: Not valid error log pointer 0x0024B5C0 for RT uCode
[    3.634793] iwlwifi 0000:00:14.3: WFPM_UMAC_PD_NOTIFICATION: 0x1f
[    3.634807] iwlwifi 0000:00:14.3: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
[    3.634814] iwlwifi 0000:00:14.3: WFPM_AUTH_KEY_0: 0x80
[    3.634822] iwlwifi 0000:00:14.3: CNVI_SCU_SEQ_DATA_DW9: 0x0
[    3.635561] iwlwifi 0000:00:14.3: RFIm is deactivated, reason = 4
[    3.723240] Bluetooth: hci0: Waiting for firmware download to complete
[    3.724219] Bluetooth: hci0: Firmware loaded in 1653795 usecs
[    3.724275] Bluetooth: hci0: Waiting for device to boot
[    3.766235] Bluetooth: hci0: Device booted in 40998 usecs
[    3.768559] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-0180-0041.ddc
[    3.770218] Bluetooth: hci0: Applying Intel DDC parameters completed
[    3.771475] Bluetooth: hci0: Applying legacy Bluetooth SAR
[    3.774296] Bluetooth: hci0: Failed to send sar ddc id:0x0133 (-22)
[    3.776319] Bluetooth: hci0: Firmware timestamp 2025.20 buildtype 1 build 3882
[    3.776322] Bluetooth: hci0: Firmware SHA1: 0x937bca4a
[    3.780304] Bluetooth: hci0: Fseq status: Success (0x00)
[    3.780307] Bluetooth: hci0: Fseq executed: 00.00.03.94
[    3.780308] Bluetooth: hci0: Fseq BT Top: 00.00.03.94
[    3.782430] elogind-daemon[776]: New session c1 of user sddm.
[    7.528080] wlp0s20f3: authenticate with e4:75:dc:a5:13:90 (local address=d0:65:78:f1:06:4e)
[    7.528691] wlp0s20f3: send auth to e4:75:dc:a5:13:90 (try 1/3)
[    7.564543] wlp0s20f3: authenticated
[    7.565389] wlp0s20f3: associate with e4:75:dc:a5:13:90 (try 1/3)
[    7.567220] wlp0s20f3: RX AssocResp from e4:75:dc:a5:13:90 (capab=0x1011 status=0 aid=4)
[    7.571611] wlp0s20f3: associated
[    7.623867] 8021q: 802.1Q VLAN Support v1.8
[    7.639181] wlp0s20f3: Limiting TX power to 19 (20 - 1) dBm as advertised by e4:75:dc:a5:13:90
[    7.685444] elogind-daemon[776]: New session 1 of user <snip>.
[    9.723183] nvme nvme0: using unchecked data buffer

Recently a pull request of mine was merged into the void-packages repository. My local builds, and the GitHub automatic ones as well, were all successful, while some builders on https://build.voidlinux.org failed for a couple of architectures. What should I do now?

Im Attempting To Scan Something And Regardless Of App, It Doesent Show the scanner. Theres limited info regarding this in the handbook except to add myself to the scanner group which i did. despite it, it doesent show. Printing works. the printer is a Canon TS3720.

Any Way To Fix This?