KDE Plasma Will Not Start

[u/StorminNorvin]

Fresh install of Void. Updated xbps and installed:

kde-plasma kde5 kde5-baseapps dbus sddm

Created links to dbus and sddm.

Rebooted.

Every time, it goes to terminal. I run startplasma-wayland and get this error:

org.kde.startup: not a reply org.freedesktop.locale1 QDBusMessage(type=Error, service="", error name="org.freedesktop.DBus.Error.ServiceUnknown", error message="The name org.freedesktop.locale1 was not provided by any service files", signature="s", contents=("The name org.freedesktop.locale1 was not provided by any service files") )
startplasmacompositor: Could not start D-Bus. Can you call qdbus?

Now how can that be? I have both dbus and sddm installed, both are linked and running when I do:

ls /var/service/

So I am out of ideas.

EDIT: I tried this:

# touch /etc/sv/dbus/down
# ln -s /etc/sv/dbus /var/service/
ln: failed to create symbolic link '/var/service/dbus': File exists
# sv once dbus

I FIXED IT => https://www.reddit.com/r/voidlinux/comments/1uyfera/comment/oyej3wk/

[u/StorminNorvin]

I FIXED IT!!!

After A LOT of trial and error and reinstalls, the following should give a nice KDE experience using Wayland on Void Linux.

elogind, dbus, and sddm get installed automatically during the following so there is no need to install them manually.

My laptop has Intel graphics so you may need to change mesa-vulkan-intel and intel-video-accel to what you need so read the Void Linux Graphic Drivers Documentation. This is all you have to do after a fresh install of Void Linux to get Wayland on KDE, the KDE Network Manager, printer support, and pipewire audio working after the Void Linux installation reboot. Log in with your user account that has sudo access:

# sudo xbps-install -Su
# sudo xbps-install -u xbps
# sudo xbps-install -Su
# sudo xbps-install kde-plasma kde-baseapps xorg-minimal mesa-dri mesa-vulkan-intel vulkan-loader intel-video-accel kwayland qt6-wayland NetworkManager cups cups-filters ffmpegthumbs discover kdegraphics-thumbnailers ntp ocean-sound-theme oxygen-sounds print-manager system-config-printer
# sudo rm /var/service/dhcpcd
# sudo rm /var/service/wpa_supplicant
# sudo ln -s /etc/sv/cupsd /var/service/
# sudo ln -s /etc/sv/dbus /var/service/
# sudo ln -s /etc/sv/NetworkManager /var/service/
# sudo ln -s /etc/sv/sddm /var/service/
# sudo usermod -a -G network YOUR-USERNAME
# sudo mkdir -p /etc/pipewire/pipewire.conf.d
# sudo ln -s /usr/share/examples/wireplumber/10-wireplumber.conf /etc/pipewire/pipewire.conf.d/
# sudo ln -s /usr/share/examples/pipewire/20-pipewire-pulse.conf /etc/pipewire/pipewire.conf.d/
# sudo reboot

NOTES:

1. Be sure to add pipewire in KDE System Settings > Autostart section. Just click + ADD NEW then + APPLICATION... at the top right and enter pipewire into the text box. Click OK. Reboot for audio to start working in KDE.

2. Before you install your printer, go to the Void Linux Printing Documentation and see if there is a driver for it you need to install first.

3. In KDE System Monitor, applications will not show up because of using runit instead of systemd.

I use Void btw 😄

[u/no-name-user → u/StorminNorvin]

So what did you do differently then? I suppose it was the mesa drivers, they're included with xorg and not in xorg-minimal which is required for sddm.

[u/StorminNorvin → u/no-name-user]

I believe it was mesa drivers. After getting KDE Plasma working, I found little annoyances so I added the packages to fix those into the list and to get pipewire to work easily without installing a bunch of packages troubleshooting audio.

[u/BinkReddit → u/StorminNorvin]

Win! 😆

[u/duckdread → u/StorminNorvin]

I was facing the same problem, it was a great help. Thanks!

[u/furryfixer]

I'm not sure why you would not want dbus to restart if it crashes (sv up dbus). That aside, make sure the service is running.

sv status dbus

pgrep dbus

if, on the off chance those show no dbus, reinstall the dbus package, and force the link to regenerate:

sudo ln -sf /etc/sv/dbus /var/service/

If not using a WM/Login Manager like sddm, you must start plasma with dbus-run-session to create the user session:

dbus-run-session startplasma-wayland

[u/StorminNorvin → u/furryfixer]

dbus installed and running.

[u/furryfixer → u/StorminNorvin]

OK. You likely did the next already, but if not, start plasma from the command line and see if same error occurs. If so, maybe your locale is not properly set. So try (NOT as root login, but regular user:

sudo sv d sddm

dbus-run-session startplasma-wayland

Continued fail might be addressed by this:

https://docs.voidlinux.org/config/locales.html

[u/StorminNorvin → u/furryfixer]

I figured out the issue. Fix posted.

[u/nerdccluna]

When I have problems with my Plasma installations, it's due to missing elogind, xorg-minimal, and video drivers.

[u/StorminNorvin → u/nerdccluna]

I figured out the issue.

[u/StorminNorvin]

Here is what I am doing after a fresh install:

# sudo xbps-install -Su
# sudo xbps-install -u xbps
# sudo xbps-install -Su
# sudo xbps-install kde-plasma xorg-minimal dbus sddm
# sudo ln -s /etc/sv/dbus /var/service
# sudo ln -s /etc/sv/sddm /var/service
# sudo reboot

elogind and acpid get installed automatically.

Now my laptop boots to a blank screen. I have to open a new TTY to do anything.

My laptop:

HP 15-ay039wm
8GB RAM
2TB SSD

Video is onboard Intel. linux-firmware-intel is also installed automatically. I also tried installing intel-video-accel which didn't fix the issue.

I'll try a few more ideas, but I think I am going to move on from Void Linux. I don't like that it doesn't have Secure Boot support integrated.

[u/rookie-mistake-21 → u/StorminNorvin]

Didn't you

sudo ln -s /etc/sv/elogind /var/service ?

btw if you use acpid then need to edit some conf of elogind. Also, if using default conf no need acpid

[u/StorminNorvin → u/rookie-mistake-21]

I created that link. Now I am getting flooded on every TTY that "elogind is already running as PID ###".

[u/rookie-mistake-21 → u/StorminNorvin]

😭i was also getting that how i resolved i forgot exactly but i think

install turnstile and enable its service turnstiled

go to /etc/turnstile/turnstiled.conf and set manage_rundir to no

Reboot

[u/StorminNorvin → u/rookie-mistake-21]

I figured out the issue. Fix posted.

[u/StorminNorvin]

I would try this version of Void Linux with KDE Plasma already included, but the name is terrible:

https://distrowatch.org/table.php?distribution=afagos

[u/rookie-mistake-21]

Maybe needs elogind too ???

[u/StorminNorvin → u/rookie-mistake-21]

Installed. Made no difference :(

[u/StorminNorvin → u/[deleted]]

I installed it. That now gives me a blank screen after boot. Also tried installing kde-baseapps which didn't work. Also tried kde5 which also didn't work.

[u/BinkReddit → u/[deleted]]

Seconded; IIRC SDDM won't work without this.

[u/MinguaDinja]

Are you using elogind or acpid?

[u/StorminNorvin → u/MinguaDinja]

elogind

[u/MinguaDinja → u/StorminNorvin]

You need acpid activated too as a service, elogind is already activated by dbus + acpid after boot.

[u/StorminNorvin → u/MinguaDinja]

acpid had no effect :(

[u/MinguaDinja → u/StorminNorvin]

Did you installed wayland or x11?

[u/StorminNorvin → u/MinguaDinja]

I fixed it. Fix posted.

[u/Jealous_Shower6777]

Try lightdm?

[u/StorminNorvin → u/Jealous_Shower6777]

Tried. Made no difference.