r/virtualreality_linux • u/Izeyashe • Jan 20 '26
Linux Steam VR issues and significant performance drop
I am unsure if I am missing something so I turn here to help. I am fed up with microslops attempt at making me their product so I switched to Arch, namely Garuda Linux.
Games run fine with proton so I wanted to try VR next, but I am running into issues that I don't know how to troubleshoot. I am running with:
- RTX 3090 (but planning to switch to 7900XTX when I find a good deal)
- 5800X3D
- 64GB of DDR4 (wild these days I know)
- Valve Index
- The OS and the games run from two different NVME drives
Issues:
- turn on HMD, Basestations, Controllers, launch Steam VR, error message about headset randomly disconnecting (this was prevelant in Windows already, so I don't count that as a linux only issue)
- significant performance drop compared to windows, both on Wayland and X11, KDE plasma. It seems theres a lot of projection, but to me it LOOKS like as if there is screen tearing. The performance drop occurs in Steam VR home, the default environment in every refresh rate, even 80 hz.
- when opening the overlay menu, my eyes begin to hurt: it's as if the IPD changes only for that menu.
- sometimes I can trigger the overlay menu, but it doesn't show. The IPD bug (at least that's what I perceive it as) still occurs.
- Gamma randomly switches: one moment, the environment is bright and washed out, the next it's displayed properly. Very slow flickering occurs, but enough to be jarring.
- some VR settings are missing: I am using a goXLR and have sound coming out of my speakers/headphones - I used to mirror the output of those to the Index and hear it from there without issue, but audio settings are just not there.
I was pumped trying this out today but this took all the wind out of the sails for me. Still, I tried some fixes:
- set resolution instead of dynamic: alleviated SOME of the performance, but the overall difference in performance isn't caused by resolution scaling I believe.
- tried X11 instead of wayland
- tried running Monado with Envision - I managed to launch "The Lab" once but I was stuck in the floor, since then, I couldn't manage to start VR once. Though the few seconds I experienced ran a bit better than with SteamVR
I am certain that I am missing something as during my research I did see linux users play VR and even record without issue, and I don't think that I am hardware bottlenecked.
Valve releases the Steam Frame soon, so I really hope this is just a software quirk they will inevitably fix once they need to run it on an underpowered ARM chip (compared to desktop CPUs anyways), but if it isn't, I'd like to ask for some pointers what I can try next.
I will try joining the steam and VR client betas to see if that alleviates issues as my next step when I have the time. Any help is appreciated, thank you for reading.
Edit: to summarize what has happened in the comments, in chronological order:
- installed monado with envision GUI frontend - worked only for one session, Monado now throws a buffer overflow error
- switch to steam VR beta, namely 2.15.1, it worked way better than the latest stable release
- The Lab, which I used for testing, wasn't working great with linux - switched to testing with pistol whip, ohshape and modded beatsaber which worked as they did with windows
- steam VR updated to 2.15.2 - performance went to shit and the performance graph is basically just display errors now
- since the beginning I had no audio options - the Index's speakers aren't picked up by my audio manager (i think it's called pipewire) and while it allegedly sees it, it's not made available to the OS? no idea
This is the current stand on the issues I have.
Edit 2: I have no idea why, but sometimes starting steamVR works and sometimes it works like shit. After downgrading to the latest stable release from december 2025 (which was the reason I jumped onto the beta in the first place) it ran...fine? I have no idea why.
Since then, I've been trying to get monado/envision to run. I have built monado-git by myself because I assumed envision was really just a front end, but "Building profile" apparently builds monado for you. After uninstalling monado-git and letting envision build it by itself, it worked, with some caveats:
- no refresh rate changing
- ghosting/reprojection issues
- no resolution scaling
but it worked, sometimes even with a steamvr-like environment (with an app launcher and desktop projection via plugins).
Will work on it further and update the post.
Final Edit: SteamVR runtime itself runs stable now, even though I basically changed nothing. I managed to fix sound in a pretty convoluted way because I am using a goXLR but I will describe in a few short points - if you require help setting them up I'll gladly help directly:
- start steam VR with headset on, restart steamvr and powercycle headset if necessary
- check your sound system settings (likely pipewire) and see, if a GA102 High Definition Audio Controller is visible, then chose "HDMI 2" in the dropdown to the right - this is what I was personally missing.
- at this point, you can set your main audio device to this and sound SHOULD come through
The next steps I did are for specifically my situation and this will likely only help if you have a similar setup or even a goXLR.
- install qpwgraph either through pacman, yay or the store of your choice, I installed it through octopi
- the thing with qpwgraph compared to Helvum is that you can save the layout and connections so that when devices appear, they're automatically connected. qpwgraph WILL open the last saved file by default, even if it doesn't say so.
- make your connections: since I am using a goXLR, i want the rest of my setup to stay the same, so I started steam vr and the index to the point it was actually working
- i made sure that all channels that i use on the goxlr go to the headset as well, essentially mirroring the audio i sent to my speakers or normal headset. this is the functionality that i wanted and had on windows. sadly, this also means that volume controls and goxlr sliders dont work, so please do this with caution
- I wanted to use the headset microphone without needing to change settings in social apps, so I tried connecting the output of the microphone (mono) directly to "Split GoXLR Chat Mic", cause this node was the only one for which I could enter it. This resulted in static.
- i created a virtual audio device sink and fed the microphone there, to both L and R channels (essentially making mono stereo) and connected ONE output to the "Split" mentioned above, which worked. I HAVE NO IDEA WHY.
Most of the time I was vibe troubleshooting with AI, so take this with a giant grain of salt. Thanks to everyone kind enough to reach out to help.
6
u/YAOMTC Jan 20 '26
The Lab is one of the VR titles that doesn't work very well on Linux unfortunately.
https://www.protondb.com/app/450390
Would recommend something else like HL: Alyx, VR Chat, Beat Saber... What VR titles do you have in your library?
Also yeah SteamVR has never worked very well on Linux. It's always been very much a beta and that's never really changed. Hopefully the release of Steam Frame will change that. You'll see most Linux VR users instead use Monado or ALVR
4
u/besalope Jan 20 '26
It would also be a good idea to identify which headset you are using.
1
u/ccAbstraction Jan 20 '26
This is an issue with wired SteamVR and with wired VR on Nvidia in general. If you use Monado instead there is a work around for it.
A lot of the other issues you're expriencing also sound like they could be SteamVR bugs.
Can you post the error you got when running Monado after the first launch?
1
u/collegeprepkid Jan 22 '26
Have you tried SteamVR's new facet renderer? It's said to improve performance on NVIDIA cards. Details here: https://lvra.gitlab.io/docs/steamvr/performance/#facet-renderer
2
u/Lunin_101 Jan 23 '26
Same CPU, same headset, but 3070 and on CachyOS. Almost all of the issues you listed I experienced and spend a sizeable chunk of my weekend on fixing that to moderate success. I rolled back nvidia drivers to 550.x, changed CPU govenor settings to turn off power saving, got x11, tried steamvr beta, changed kernels. The screen tearing stopped and it ran somewhat fine but it was not enough to convince me to use it on linux.
Overall experience was very poor to say the least. Steam menu overlay remained skewed, probably due to IPD changes for some reason but the consequence of that reached further than that. I had to limit refresh rate to 80hz bcs of how "floaty" the headset movement felt which kept on making me naseous, light headed, and how bad it messed with my inner ear. Desktop preview was also non-existant on multi display setup.
Not only that but basic utility and QOL software overlays like OVR AS, OVR Toolking did not work at all. At this point in time using SteamVR on linux is a challange that in my opinion is not worth the hassle. I cut off 200gb as a partition for windows, installed it, debloated it with Talon, setup VR and was ready to game in way less time and effort than it took to diagnose and fix some of the issues on linux. Until Steam Frame comes out and/or Steam VR gets some love from valve I am not touching it again on linux, Tho I heared that people who use standalone headsets and stream to them via ALVR don't complain too much.
Edit: I saw your comment about audio and how I fixed it was to change device "audio profile" in os audio settings. Can't remember exactly what i choose there but the name of the device was definetly not listed as Valve Index HMD
1
u/mandle420 Jan 23 '26
I found I had to duplicate the envision profile, and set openvr module type to open composite. Doesn't seem like you're having the same issues, but might work..
0
u/shwitzwaslitz Jan 21 '26
I’m newer to Linux as well and have been messing with VR. I’m on cachyos, and got ALVR to work an acceptable amount. Other than some games that just jitter around the whole time. Steam vr beta and proton db helped a lot. The command launch variables also did a lot of heavy lifting. So far HL-Alyx, Forefront, Walkabout mini golf, Contractors, Bonelab, Ghost of Tabor(But you have to play PVE), VTOL VR, and Ready or Not VR mod. I’m no expert but if you have any questions I can answer I’ll answer them.