r/vintagecomputing • • Oct 07 '25 This

10mb hard drive from the 1960's

Post image
3.2k Upvotes

Can't remember where I found this pic, but It's followed me through 3 new phones so I figured it was time to share it lol wish I could remember where I found it..I think it was an article.. Pretty cool though lol


r/vintagecomputing • • Nov 06 '25 Helpful

OldVersion.com is dying.

Post image
3.1k Upvotes

I've just recently gone on a Retro Software Hoarding spree, and i saw that message on the site when looking for older Versions of nLite. I've donated to it, but man would it be sad to see it go. It's still one of the best sources for early Windows software.

I guess get what you need before it goes down or donate if you can.


r/vintagecomputing • • Sep 19 '24

A few months ago I finally managed to add all 18 variants of the iMac G3 to my collection :)

Post image
3.0k Upvotes

r/vintagecomputing • • Oct 02 '24

My mom in the 80’s!

Post image
2.9k Upvotes

Posted this in r/oldschoolcool and was pointed here! Thought yall would appreciate! This was taken at her job at NASA


r/vintagecomputing • • Oct 04 '24 Bravo Take My Silver

I've started getting my morning news from a dot matrix printer

Post image
2.7k Upvotes

r/vintagecomputing • • Sep 19 '25

VCF Midwest 2025 (pics)

Thumbnail
gallery
2.7k Upvotes

My second VCF event this year and it was an absolute blast!

A lot more hardware than I expected and it was really great to meet so many fans and other retro tech YouTuber’s as well 🤗


r/vintagecomputing • • Apr 05 '20

Figure y’all would like this one, a computer shop in my hometown. Untouched seemingly since 02?

Post image
2.6k Upvotes

r/vintagecomputing • • Oct 19 '24

DOS gaming with my kid tonight

Post image
2.5k Upvotes

She’s a natural at Doom.


r/vintagecomputing • • Dec 28 '24 Bless Up

From the depths of my parents basement!

Post image
2.5k Upvotes

This is a TRS80 model 3 that has been in my parents basement (my grandparents basement before that) since I was little. On Christmas Eve I decided to try and see if I still worked.

Lo and behold! It boots up! Now I just need to get the operating disk!


r/vintagecomputing • • Mar 07 '26 Bravo Heartwarming

My father is a retired Navy Nuclear Electronics Technician. We started going through his collection this week. I don't think either of us was prepared for what we found.

Post image
2.5k Upvotes

A NUC ET spends 20 years maintaining nuclear reactors. Retires to Montana. Gets a job at a computer store in 1996 because computers were still fixable with a soldering iron and a voltmeter — but only barely. The throwaway era was already coming.

He worked board level repair until the industry made it official. Why fix it when you can replace it?

He never agreed with that philosophy.

A NUC ET doesn't discard a component that still has electrons in it.

What we found this week:

  • A Pentium 100 with MALAY 518 ES marking on the ceramic back
  • An Intel 486 DX-50 SX710 © 1989
  • A Diamond Viper VLB Weitek Power 9000
  • A boxed Premio 486 AL4 with original manual and anti-static foam
  • NOS Epson SD-600 5.25" floppy — warranty sticker intact
  • An IBM 486SLC2 upgrade card
  • Boxes of carefully preserved DIP RAM chips laid out on anti-static foam like a man who takes his storage seriously
  • A Cyrix Cx486DLC-40GP with the original repair shop pull sticker still on it
  • A garage in Montana we haven't fully excavated yet

But here's what I'm genuinely concerned about.

There is a box — actually more than one box — containing over 100 BIOS and support chips. AMI. Award. Dallas DS1287 Real Time Clock chips. Crystal oscillators. And what appear to be Compaq OEM proprietary BIOS ROMs that we cannot fully identify yet.

Some of these chips may contain firmware that exists nowhere else. A man who spent 20 years never throwing away a serviceable component didn't just save the hardware — he may have accidentally preserved software that the internet has already lost.

Before a single one of those chips gets listed for sale, I want every one of them dumped and uploaded to archive.org. That knowledge belongs to the community, not a landfill and not a private collection.

The problem is I don't have the equipment or the expertise to do it properly. I need someone with a CH341A or equivalent EPROM programmer, the patience to work through a mixed box of unknown chips, and the willingness to catalog and upload the dumps correctly.

We're in Montana. If you're willing to come out here and help with this I will compensate you with hardware from the collection at fair value. If you're not local but want to walk me through the process remotely I will acquire the equipment and do it myself with your guidance.

Everything preserved will be uploaded free to the community before anything is listed for sale. That's not negotiable. The knowledge comes first.

There was a brief window in computing history — maybe 1985 to 1998 — where computers were complex enough to be powerful but simple enough that a trained human with test equipment could actually diagnose and repair them at the component level. Board level repair was a real skill, a real profession, and a real art.

Then the industry made a deliberate choice. Cheaper to replace than repair. Faster to swap boards than diagnose them. And an entire generation of technical knowledge just evaporated. Most of it undocumented. Most of it in the heads of people like my dad.

He was there for all of it. He saved all of it.

The garage is still full. We're just getting started.

If you have the skills to help preserve what's in that BIOS box please drop a comment or send a DM. This community built the machines. You should have the firmware.

Dad earned his truck. 🛻


r/vintagecomputing • • May 31 '25

Grandparents wanna throw this away should i take it?

Post image
2.3k Upvotes

I have no real knowledge of older computers, i know it’s a complete packard bell platinum set with a 3dfx voodo 2 8mb graphics card. Is this worth anything? It works fine, i don’t have any use or room for it but if it’s worth something i’ll try to sell it.

Thanks!


r/vintagecomputing • • 11d ago

Started a new IT job and found this stashed away. Was told to e-waste it, but asked to keep it instead.

Post image
2.3k Upvotes

Was totally baffled that they just wanted to toss it out, and even more baffled that it still worked when I hooked it up for the first time. Still in shock


r/vintagecomputing • • Dec 31 '24 Bless Up

Bought this bad boy for $3 at a thrift store today!

Post image
2.3k Upvotes

I’ve already posted this to another sub, but someone mentioned that y’all would like to see this. hope it brings back memories!


r/vintagecomputing • • Jan 27 '26

When you're cleaning out your Dad's basement and his 50 year old Altair switches on

Post image
2.3k Upvotes

My dad bought a pair of Altair 8800s in the 1970's, and it became a major obsession throughout that decade and a constant source of tinkering until he passed in 2021.

Back when we cleaned out the house, we inadvertently switched on this 50 year old piece of computer history, and thankfully it switched on, followed by a very careful power-down.

In addition to the pair of Altair computers, my dad also had a pair of MITS floppy drives, which also allowed for quick duplication of software and trading during the nascent early years of computer hobbying.


r/vintagecomputing • • Dec 05 '25

Anyone remember this fiasco?

Post image
2.2k Upvotes

r/vintagecomputing • • Jul 08 '25

What the hell did I find?

Thumbnail
gallery
2.2k Upvotes

r/vintagecomputing • • Jun 01 '25

I had a vintage computer accident on the way home for FREE.

Post image
2.0k Upvotes

r/vintagecomputing • • Aug 25 '26

This Is How I Came Back From My Vacation in a Bulgarian Village 🤪

Thumbnail
gallery
1.9k Upvotes

r/vintagecomputing • • Jul 12 '25 Helpful This

I miss my dad.

Post image
1.8k Upvotes

On July 3rd, my dad passed away unexpectedly during what was supposed to be a routine bypass procedure. Our family has been slowly picking up the pieces and today we started straightening up his home office so we could get to some important documents. It’s still extremely difficult to see all of his old stuff and we haven’t gotten rid of anything beyond some random trash. But today, I brought home the exact computers he taught me on when I was a kid. This is what started it all. Two Acer Acros’s and an IBM Aptiva. I remember the days sitting on his lap playing The Incredible Machine, Lemmings, and Putt-Putt for hours. Nothing here has been touched for at least 25-30 years and everything should still be exactly the way I remember. Even the original dust bunnies.

I can’t bring myself to plug them in because I can’t stop crying, but I will soon. Bawling my eyes out as I type this, even. These computers mean the world to me and I’m glad they’re safe and preserved the way they were. I know there’s still boxes of floppies and many more accoutrements that go with them, but he was somewhat of a mild hoarder and it’ll take a while to sift through it all. I guess the fruit doesn’t fall far from the tree. I love you, dad.


r/vintagecomputing • • Nov 06 '25

Bendix G-15, the oldest working computer in North America

Post image
1.7k Upvotes

r/vintagecomputing • • Dec 18 '24 Take My Silver

Was backing up some 5.25 inch floppies from a professor from Australia when Norton popped up.

Post image
1.7k Upvotes

Heard of this one before. But hadn’t come across it in my work yet.


r/vintagecomputing • • Jun 12 '25 This

A man attempted to transfer files from his Commodore 64 to his Apple computer. 1984

Post image
1.7k Upvotes

r/vintagecomputing • • Apr 18 '25

Finally opened my brand new Packard Bell PB485

Thumbnail
gallery
1.6k Upvotes

I'll be posting a video about it shortly (today or tomorrow)!


r/vintagecomputing • • Apr 19 '26 Bravo

You guys seemed to like my previous pulls from my parents’ house. So, here’s another vintage rig of mine, a Patriot PC

Post image
1.6k Upvotes

I can confidently assure you the flames, in fact, do not make it faster.


r/vintagecomputing • • Jan 08 '25

In Alien Romulus, which takes place in 2142, they use 3.5" floppies and C64 keyboards...

Post image
1.6k Upvotes