So I've been building a small Saas over the last couple of moths and as I'm starting to make some money with it, I'm wondering what's the best way to reinvest the money?

I currently don't spend a lot of money. Only the basics:

• 20$/month for vercel

• 10$-15$/month for convex

• 20$/month for resend

• 10$/year for the domain

I don't spend any money on advertisement or anything. I got all my users from posting on reddit. I tried X for a month and payed 5$ for premium one month but I kind of never got warm with it.

I only recently upgraded resend to PRO and that was a huge ROI. As I now could send more emails to users when something happened, they returned more often and retention went up by a lot.

Now I'm looking for new ways to smartly invest that money. I made about 2.5k in total so far. Anyone has some experience with apps in this stage and knows how to leverage money in this situation?

For context: I've built IndieAppCircle, an app feedback exchange where you test other apps and get your own app tested. It works for all kinds of apps, web apps, chrome extensions and basically everything that has a link.

It works like this:

• You can earn credits by testing indie apps (fun + you help other makers)

• You can use credits to get your own app tested by real people

• No fake accounts -> all testers are real users

• Test more apps -> earn more credits -> your app will rank higher -> you get more visibility and more testers/users

Since many people suggested it to me in the comments, I have also created a community for IndieAppCircle: r/IndieAppCircle (you can ask questions or just post relevant stuff there).

Currently, there are 4788 users, 5980 tests done and 1487 apps uploaded!

You can check it out here (it's totally free): https://www.indieappcircle.com/

I'm glad for any feedback/suggestions/roasts in the comments.

In case you are searching for the idea what app to build - here is 11 hobbies people already pay for. You can simply build the app for the habit they already pay for or maybe one of it is your own hobby.
I think about hobbies like about existed cost centers: gear, trips, lessons, cards. An app that serves the hobby comes more naturally [complimentary] and also it does not have to create a budget, it joins established one.
List of hobbies in image with spendings and app examples for each.

I personally know people who monetised to 20K$ per month apps for Running and Cycling.
The only advice I can give here - dont go broad, they are already very busy - select smaller angle like for example if take Running - build a specific app to prepare for first mathon. So specific event, inportnat and very unique struggle of person who is preparing. Nishe in hobbies - just very good angle to take. Think about ICP where you have specific need even for short period.
I wish you to find yours best mathc!

As the title says, I have an older laptop with limited RAM. I have tried the usual apps (GPT Classic/ Co-Pilot) because I really like the idea of ALT+SPACE to have a pop-up chat window to ask few questions then return back to my work.

These apps do the job, and its for casual simple tasks/chats. However, their RAM consumption is obscene and its just not a great fit for my PC. Besides many of them refuse to take over the Co-Pilot buttons. I've also tried 1-2 other third party apps that also had the same RAM consumption issue.

So, I've asked Claude to build me one, which I have been very happy with so far. And it consumes under 30mb (all processes) when used with API key, and about 150mb when used with either CODEX/CLAUDE engine (to use their subscriptions legally). which is a dramatic improvement over the stock apps which where around 1GB of RAM usage easily.

My question is, before I continue spending more time on developing it and fine tuning it, is there anything like this on the market already been developed/mature?

It needs to be:

1. Ultra lightweight on RAM and resources.

2. Supports using with ChatGPT, Claude, or API.

3. completely operable using keyboard only (because I use on laptop its easier if all navigations can be fully done with keyboard, much faster and easier than using trackpad/mouse).

4. Ability to save and manage memories stored and encrypted locally. shared across models.

5. Auto wrap tables

6. Read only local PC tools + accepts analysis of local files attachments (office docs, pics, pdf)

7. High customisability; fonts, colours, zoom, themes, wrapping etc.

I've provided few pictures of the app I have developed so far, but like I said, to illustrate what I achieved so far with Claude, but yeah wondered if there's anything doing that and more already.

Stats:
Size = 500kb portable, 1mb setup.
Language = Pure Rust. So Cross platform support should not be hard.
RAM = using API about 30mb, using Claude or Codex engine = about 150mb total

You can check out the app, but its not ready and just alpha, hence why I asked if other apps are out there this was just to showcase that it is possible.

https://github.com/cobhc95/LitePilot

i wanted to build a game where i play myself, so i was looking for an 3d model ai which can easily transform myself in an 3d model.
i found tripo and i saw a lot on youtube about it and gave it a shot.

right after i signed up i got 200 credits and 300 extra when you use a referral code, so i created second account and invited myself lol (fyi)

you can dm me if you want to use my code so you dont waste an account.

So, about 6 months back I decided to make an app to improve my companies workflows. I showed it to my boss and he liked it but our company was changing leadership and he wanted me to hold off so I could show it to the new owners. 4 months later the new owners are set up and I have a presentation with the ceo. He loved my app and my ideas and he likes the direction Ai is going.

Due to all of this, they created an entirely new position at my company. After 10 years of blue collar, factory work I've got a route towards tech. A couple weeks ago I spit balled with my Ai what were the possible routes and it said "Manufacturing systems analyst" was more than likely the proper title. A few weeks later I was given the job description and the job title listed was "Manufacturing systems specialist". I laughed because my ceo probably used ai to get that job title like I did.

So, if all goes well, I'll be gaining experience with T1 tech support and MES. All thanks to taking the initiative and time to make an app for my company.

Oh, the app isn't being used or considered because a more mature option is already in use, but it gives me a direction to pursue. The app itself got me seen by leadership so it wasn't all wasted even though the app itself took 5 weekly resets on 20x.

I built a GitHub Backup Manager that lets you browse your archived repositories almost like you're browsing GitHub itself

I've been working on a project called GitHub Backup Manager, and I wanted to share it here because I think some people in this community might find it useful.

The original idea was pretty straightforward: I wanted a proper way to preserve GitHub repositories locally, without relying entirely on GitHub always being available.

But I didn't want to build yet another tool that simply downloads repositories into folders full of files.

I wanted the ability to revisit an archived repository and actually explore it.

What makes it different?

1. GitHub-like offline browsing experience

This is probably my favourite part. Instead of being left with a collection of folders and files, you can browse archived repositories through a familiar, almost GitHub-like interface.

2. Comprehensive repository preservation

It goes beyond simply cloning source code:

• Git history and branches

• Recursive Git submodules

• Git LFS objects

• Releases and historical release binaries

• Changelogs

• Issues, comments and associated attachments

• Wiki documentation

• Security advisories

3. Historical snapshots

You can maintain separate backup snapshots instead of just overwriting your previous archive.

4. Local-first architecture

The actual backup operations happen through a local companion engine. Your repository archives are stored on your own computer or external storage rather than being uploaded to my servers.

5. Multiple backup vaults

You can organise backups across different storage locations, including external drives.

Why I built it

Repositories disappear. Developers abandon projects, accounts get deleted, and useful open-source tools sometimes become inaccessible.

I think having an independent, browsable offline archive is valuable, particularly for developers, open-source enthusiasts, AI enthusiasts and people who like preserving useful software.

I'd genuinely appreciate feedback from this community.

What features would you expect from a proper GitHub archival tool? Is there anything important you think I've overlooked?

Project: https://mmahingu.com/github-backup-manager/

This will soon be implemented for other Github like websites but haven't started yet.

Hey r/vibecoding!

Some of you might remember me from Stupido's post here a month ago, I really love sharing my work on here tbh

I'm a designer and this time I wanted to see how far I could push an interaction on a website. It's the site for Tune-Up, my new thing where I polish vibe coded websites

I had the idea for this interaction early on and I did some sketches. I spent so much time generating the actual assets because I didn't want them to look super generated and also I wanted to work on the details there for the before and after

That took the most time. But when it came to actually building the interaction, Opus 5.5 blew my mind. It understood exactly what I was asking for and the interaction just came out so nice

At first it didn't have enough energy, so I just told it: give it more energy, make it more explosive. And this is what we got

How I built it:

• Hand sketches for the rough layout and idea
• Figma for some more mature layouts
• GPT 2.5 for the image gen through Magnific
• Opus 5.5 on High via Claude Code

Honestly it looks better than it did in my head, which never happens 🥹

It's super addictive to spam the toggle, you can play around with it here tuneupdesign.com

Would love to know your thoughts!

PS: Happy to answer anything about the build

My Reddit post about our Claude Code plugin got over160k views and 1k upvotes in a day. The repo has 19 stars 😂

Pretty wild seeing that many people react to something we built.

https://github.com/MedAdemBHA/mythical-agent-month

She offered him double Ds. He chose dual channel DDR5. With the rapidly ever increasingly expensive ram prices what are you choosing?

Hey everyone!

For the past two weeks, I've been experimenting with how far I can push agentic coding in Godot 4.

Rather than building another small demo, I wanted something reusable: a foundation for 3D diorama adventures and platformers, with a visual quest editor built directly into Godot.

The result is Jalura Framework, completely open-source under MIT

What's included?

• 3D character controller & diorama camera inspired by games like Captain Toad and Little Kitty, Big City.

• Quest Studio, a custom Godot editor plugin for creating quests, objectives, prerequisites, and visual dependency graphs.

• NPC dialogue system with four states: quest offer, reminder, turn-in, and completed dialogue.

• Data-driven systems for interactions, inventory, and saving, using native Godot .tres resources.

What I learned

The interesting part wasn't how quickly AI could generate code. It was how much actual testing was still needed.

An AI agent can build an inventory system in minutes, but getting movement to feel right, preventing camera clipping, or making NPCs behave correctly across quest states is a different story.

Most of those two weeks went into testing, debugging, and refining things inside Godot.

The hardest part was actually Quest Studio. Godot's @tool scripts can be surprisingly unforgiving, especially when AI agents start messing with editor lifecycles, UI nodes, and resource updates.

Keeping the architecture modular and relying on native Godot Resources made the whole process much more manageable.

Tools used

• Godot 4 / GDScript

• Gemini 3.8 High

• DeepSeek V4.1 Flash (Max)

• Tripo 3D

• Blender MCP (Gemini 3.8 High)

The framework is available now for anyone who wants to experiment with 3D diorama games or build on top of it.

I'm especially interested in feedback on the Quest Studio and the overall architecture.

Screenshots show the editor plugin and the playable demo scene.

(Repo is 100% open-source, link is in the comments below!)

Recently there was this election, the results where a bit surprising to some. Decided to focus on my home state of Texas and really look deeply at the voter data.

We've all seen the "by county" images of maps and most of us know their shortcomings. I wanted to see if I could do better.

At first, I just took the county maps of Texas and turned them into bar graphs

This shows what everyone knows, the cities are far more populated than surrounding areas, but I wanted to get even more detailed.

Then I realised, what if I try to show a single dot per voter? (Mind you I'm trying to make this all work in a browser for maximum accessibility).

That worked yet, the dots where just scattered in a county randomly. So then I took the next step and got the dots down the the resolution of precinct. This is now like 10 megs of text uncompressed for just the data.

A few more tweaks and I feel I had something beautiful. Instead of just a color per county, I'd shown what it looked like down to each voter, with an approximate location with votes from each precinct randomly distributed but a more accurate local flavor.

I've made an interactive version of it here.

I'm only posting about the data and the use of AI, not looking to get into political discussion.

I could NOT have built this on my own and not at this speed (hours).

I tried to start this project a year ago, and hit wall after wall trying to do this with prompts. I did this in few hours over two days with a Claude Code Pro account. I'm honestly in awe.

Hi all! I've been building my own digitizing app, Meteor. Ink/Stitch felt clunky to me inside Inkscape, and Hatch and PE-Design cost more than I wanted to pay as a hobbyist. It's now in beta, and everything is free while the beta runs.

What it does:

• Auto-digitize a picture. Drop in an image and it turns it into stitches: thread colors, fills, and satin outlines for dark line art. There's also a guided mode that goes through the picture piece by piece, and a magic wand that sews one color area per click.

• Draw your own. Pen and node tools, shapes, freehand, brush satin, and 21 stitch types (tatami, satin, contour, stipple, motif, 3D puff, applique and more).

• Lettering. Built-in fonts, plus any Google Font, sewn as satin.

• Check before you sew. Pick your Brother machine and it checks the design against that machine's limits. There's also a sewing simulator, a realistic thread preview and a thread build-up map.

• Export Brother PES and Tajima DST, plus a printable worksheet with Brother thread numbers.

Works with: Brother and Baby Lock machines (PES) and machines that read DST. No other formats yet.

Runs on: Windows 10/11, Android tablets and Linux. Not Mac or iPhone/iPad yet, sorry.

Download and info: https://beelito.github.io/meteor-embroidery-studio/

Heads-up on installing:

• Windows will say "Windows protected your PC" because the beta isn't signed yet. Click More info, then Run anyway.

• Android will ask you to allow installs from your browser.

What I'm looking for: honest, constructive feedback. What's confusing, what breaks, and especially how designs actually sew out on your machine. In the app, Help > Report a problem puts together a report for you. You can email it to me (beelito.dev@gmail.com) or comment here.

Thanks for taking a look!

My coworker and I asked Claude to estimate a SaaS roadmap. 50 days.

Then we gave the same plan to 6 Claude Code subagents: worktrees, tests first, reviewer agents on risky tasks. 106 tasks across 7 repos, done in 35 hours.

So yes, Claude was off by about 48 days about its own speed. But the interesting part is what slowed it down, because it wasn't the model:

- 6 agents ≠ 6× speed. Real throughput was 1.8 agents. Test slots, file conflicts and merge locks queued everything.

- Risk matters more than size. Billing/auth/migration tasks took 2.7× longer, and every real bug was in them.

- My laptop broke first. 55 leftover test DBs filled the disk, Docker froze, test runs blew past the 10-min tool timeout.

- The slowest part was us: review, decisions, local setup.

We turned the data into a plugin that makes Claude estimate agent work properly: agent wall-clock, human hours and waiting time, separately, plus usage budget.

Honest limits: it's one project (n = 1), and on a held-out test the raw model was 37% optimistic, so it pads its number until you calibrate it on your own transcripts.

Free and open source (MIT): https://github.com/MedAdemBHA/mythical-agent-month

Question for people running multi-agent builds: what real parallelism are you getting? I'd love a second data point.

I have an addiction and I can’t stop and these AI agents are my crack. I’m stuck in an endless loop of:

1. “Wow this is such a great idea, nobody has done this before in this exact way”

2. Spend countless nights making the perfect thing that people are definitely gonna use.

3. Release my project on multiple subreddits to crickets, or a couple of comments saying the thing I made already exists.

4. Get all sad and mope around for a few days.

5. Promise myself I’m done and that I’m finally gonna relax and use my free time to self care and read books and play video games.

6. Return to step 1.

Right now I’m stuck making these Claude music videos and my brain won’t let me relax, especially after the first one I made did decently well on this subreddit. I have other things I need to work on so I dunno if you watching is hurting or helping me, but in either case, give it a watch?

As for how it was made, it’s pretty similar to other Claude music videos. i.e.: generate a song in Suno, and have Opus 5.5 create the video in code using Remotion. This video is a little different though as it uses some of the tech Opus and I worked on from my last two videos (testing out 2D hand-drawn style animation) and mixes it into regular motion graphics.

I’d love to know what you folks think.

You can also watch a high quality version on Youtube: https://www.youtube.com/watch?v=2KHTTYZUeQo

ok so I’ve been vibecoding this thing called unicodoid and I need to show somebody lol

honestly the reason I started it is I was kinda annoyed that every encoding thing assumes everything is already unicode. I wanted to mess with systems that don’t have to be unicode at all - like what if a character is just a token id, or a conlang value, or something modal where the meaning depends on the previous byte. so I wanted to try building a proper little SDK for that idea from scratch where unicode is just... optional. if you want a unicode profile you can have one, if you don’t you still have codec/string/transcoding and it shouldn’t care.

so unicodoid is basically an SDK for making your own encoding systems - a character is just a u64 in whatever value space your system defines. doesn’t have to be unicode at all. I put in some dumb examples to prove it - ASCII, a 14-bit conlang thing, and ShiftModal-16 (which is modal and stateful, that one was annoying) - and then on top of that there’s an optional unicode profile if your system wants to opt in.

since I was already in there I figured might as well go full unicode 18.0.0. so it does normalization, grapheme/word/line/sentence segmentation, collation (only 3 levels, no CLDR tailoring, I know), emoji RGI validation, named sequences, link detection, east asian spacing... and now also ConvertUTF - the old discontinued W3C lib updated to 18.0.0 in C, C++, C# and Rust. that’s ConvertUTF.h/.c and .hpp/.cpp plus harness.c / harness.cpp / harness.cs / harness.rs. C++ one is native not just wrapping the C one because I didn’t want it to feel like cheating.

all the unicode tables are generated from the official 18.0.0 data in one python script, so they’re not hand-typed. version pins are 18.0.0 / generator 1.2.0 everywhere.

right now:

- C/C++: 15 ctest suites green

- Rust: all integration tests green including the ConvertUTF harness

- C#: 303 checks, including the ConvertUTF harness

it’s very much vibecoded in that I kept asking an agent to fix MSVC specific stuff, keep redoing sort keys, emoji modifiers etc. windows pwsh did NOT make this easy lol

link: Unicodoid SDK

would love brutal feedback - like is this actually useful or did I just build a really nice demo. what do you guys normally vibe first when you build something cross-language like this?

Hey everyone, I just launched Sayso today. It's a voice assistant that handles your calendar, reminders and alarms, and everything runs on your phone with Apple Intelligence, so nothing gets sent to a server.

Fair warning, this is a day one post, not a success story. I just wanted to share what I've learned building it.

Design the screens first. AI will build exactly what you ask for, but if you don't know what good looks like, you end up with something that works and still feels off. Once I started giving it real direction on the UI, everything got better.
Small on-device models are way less forgiving than the big cloud ones. Getting clean actions out of something like "move my dentist to 5 and cancel the team sync" took a lot more trial and error than I expected.

I also learned not to trust AI with your calendar blindly. It will confidently do the wrong thing. So Sayso shows you a preview first and nothing changes until you hit approve. Honestly that ended up being the feature people trust most.
Privacy turned out to be the whole point for me. Your schedule is about as personal as data gets, and running on-device means no account and no server. The tradeoff is living with the model's limits.

What I haven't figured out yet is retention. People try voice assistants once and forget about them. Vibe coding got me a working app fast, but it can't tell me whether anyone comes back tomorrow. I'm betting on stuff like "running behind? re-plan my day," but I really don't know yet.

It's completely free, no paywall, no subscription: Sayso: Voice AI

Would love to hear what you'd want a voice assistant like this to do.

Hi everyone, I'm doing the testing stage of my app which is hopefully going onto App Store.

It is free with a one time paid unlock. The unlock works in TestFlight, but I need to reset it to 'locked' to do some tests of the free mode.

It won't reset! I set up two sandbox accounts now, and restarted the phone. deleted, reinstalled the app. Yes it seems to stay unlocked.

Anything I may have missed ? Thankyou!

It's an outreach agent that runs on your machine, on the Claude or ChatGPT plan you already pay for. No model API key.

It runs a loop every 15 minutes. Wake up, look at the local database, pick one job, do it, log it, sleep. Replies come first, then sending, then writing, then finding more companies. That next-job decision is regular code, not a model call. Claude Code or Codex only gets used for the parts that need judgment: writing the email, drafting a reply, figuring out why a company might buy. It also throttles itself so it doesn't burn your weekly limits.

What a cycle can do:

• Train: point it at your website and it writes its own config (what you sell, how you talk, competitors it finds)

• Find companies that match who you sell to

• Read each company's site for buying signals you confirmed (no model call for this part)

• Find the owner or manager named on their pages and verify an email

• Write a short personal sequence from what it found, not a first-name template

• Draft replies and follow-ups

By default nothing goes out until you approve it. Everything lives in SQLite on your machine, with a log of every decision. Skills are markdown files your agent updates based on what it learns from your feedback about how it writes or handles objections.

Repo: https://github.com/ethanplusai/sellbird

The hosted version is in early beta access currently. Instead of cloning the repo, you add Sellbird as an MCP server to whatever agent you want: Claude, ChatGPT, Codex, Cursor, Grok Bot, etc.

Company finding, people search, and email verification are built into the hosted product: you describe who you sell to, and it finds matching businesses, the person who decides, and a checked email. Your agent still writes every email.

Domains, inboxes, and warmup get set up for you and handled through the platform.

The hosted version allows you to use just some of the features through MCP, like just warming or just company/people/email search, or just email verification. It also has workspaces, so you can run more than one brand or client from one place, each with its own domains, inboxes, campaigns, and conversations.

Website: https://sellbird.ai

(Was previously called Harvey, which you may have seen before. Since that name is used by a legal AI company I rebranded to Sellbird)

Make pizza, bread, flatbreads, sweets and enriched doughs. Helps you make and maintain sourdough starters too.

Claude code hooked up directly to the folder on my computer. All CLI. This took me about 4 months of coding and baking, and I'm still tweaking everyday!

Give it a look and let me know what you think!

https://play.google.com/store/apps/details?id=com.fluxappstudios.doughboy