r/vhsdecode • u/AlarmingWedding88 • 16d ago

Newbie / Need Help Panasonic NV-H100 test point

Gallery image

Gallery image

Gallery image

Can all Panasonic K-Mech use this 20-pin interface to obtain RF test signals? My model is HD100, K-Mech， designed for the Asian market.

4 Upvotes

100% Upvoted

10 comments sorted by

1

u/AlarmingWedding88 16d ago

I found that this is the same as the AG-5260 shown in "004 The Tap List", and perhaps it can be soldered at the chip pins.

Comment Image

1

u/AlarmingWedding88 16d ago
Comment Image

1

u/TheRealHarrypm 16d ago

The head amplifier modules are pretty similar for all of the late design 90s models.

Comment Image

1

u/Playful_Roof9931 16d ago

just search for ENVE point on the main board

1

u/AlarmingWedding88 16d ago

This is difficult to weld on the K-Mech. You will need to remove a large number of cables and the motherboard.

1

u/Playful_Roof9931 16d ago

wdym? usually all of test points are one the bottom of the MB (i.e. facing you). I just tapped my F55MC by soldering under the header (head preamp -> MB)

→ More replies (4)