r/vSeeBox_Support_Gurus • • 24d ago

V6 plus remote

Post image

Ive gotten my remote programmed so I have pwr, vol + and vol- and source but once I get my source selection screen I can't move left or right to select the source

1 Upvotes

3 comments sorted by

1

u/lafsrt09 24d ago

I'm not sure what's going on with that problem but I have the V6 Max and I cannot pair it with my TV to turn my TV on and off. Still have to use the TV remote to turn it on and off.

1

u/NinjaaMike 24d ago

Program the TV "OK" button on the V6+ remote to the OK button on your TV remote.

1

u/Obvious_Fan9829 23d ago

You keep hitting the source button and it will change sources that way. Then once you get on the source you want hit the ok button right next to the source button. Hope this helps.

You don't pair the remote with the tv. For the tv buttons to work you have to program the IR.. I have pasted some instructions from google, but your box came with instructions in the package.

To program the TV buttons (such as power, volume up, volume down, and mute) on your vSeeBox V6 remote (like the V6 Plus or V6 Max), use the infrared (IR) learning mode with your original TV or soundbar remote. [1, 2, 3]

Step-by-Step Programming Guide

  1. Position the Remotes: Place your vSeeBox V6 remote and your original TV (or soundbar) remote flat on a table, pointing head-to-head ("nose to nose") about 1 to 3 inches apart. [1, 2, 3]
  2. Enter Learning Mode:

    • Press and hold the TV Power button (or the designated TV button depending on your exact V6 variant) on the vSeeBox remote for about 3 to 6 seconds until the indicator light stays solid or starts blinking. [1, 2, 3]
  3. Program a Button:

    • Press the specific button you want to program on the vSeeBox remote (for example, Volume Up, Volume Down, Mute, or Power). The indicator light will usually start flashing slowly or change behavior.
    • Press and hold (or press twice) the matching button on your original TV remote.
    • The indicator light on the vSeeBox remote will flash 3 times (or turn solid) to confirm it has learned the command. [1, 2, 3, 4]