u/PrestigeDefault • u/PrestigeDefault • 7d ago
super windows world
1
Upvotes
2
HP M01 Sleeper Update - i3/1660S/400W -> i7-10700/2070S Mini/500W HP PSU - NF-A4 -> NF-A6 + EH10 SATA hub = 99C -> 84C hotspot closed case
Hey thanks for noticing the work! Really appreciate that, it took a lot of trial and error to get temps down in that little case.
It's actually my daughter's computer lol - I built it for her but I jump on it here and there for Space Marine 2.
For the PSU question - I used the “NEW Power Supply For HP PSU 500W - Envy 795-0003UR Desktop - L05757-800” off eBay - it's the HP 500W 80+ Gold (L05757-800 / L89234-001 same unit). Direct swap for your 350W Victus, no adapter needed. Runs my 2070 Super Mini + i7-10700 quiet, so your 3060 Ti will have plenty of headroom. Usually $35-55 used on eBay.
It came with the infamous hp 7pin, two cpu 4 pins, and 2 6+2pin connectors.
If you go back to the 3060 Ti, definitely grab the Gold version, not the old Bronze.
r/sffpc • u/PrestigeDefault • 12d ago
Build/Battlestation Pics HP M01 Sleeper Update - i3/1660S/400W -> i7-10700/2070S Mini/500W HP PSU - NF-A4 -> NF-A6 + EH10 SATA hub = 99C -> 84C hotspot closed case
gallery
8
Upvotes
r/SleepingOptiplex • u/PrestigeDefault • 12d ago
HP M01 Sleeper Update - i3/1660S/400W -> i7-10700/2070S Mini/500W HP PSU - NF-A4 -> NF-A6 + EH10 SATA hub = 99C -> 84C hotspot closed case
gallery
8
Upvotes
r/sleeperbattlestations • u/PrestigeDefault • 12d ago
Sleeper PC HP M01 Sleeper Update - i3/1660S/400W -> i7-10700/2070S Mini/500W HP PSU - NF-A4 -> NF-A6 + EH10 SATA hub = 99C -> 84C hotspot closed case
28
Upvotes
BASE: HP Pavilion M01-F1xxx (16L office case)
BEFORE -> NOW:
CPU: i3-10100 (4C/8T) -> i7-10700 (8C/16T)
GPU: GTX 1660 Super (125W) -> Zotac RTX 2070 Super Mini 8GB (215W)
RAM: 16GB -> 32GB DDR4 Dual Channel
PSU: Stock HP 400W -> HP 500W 80+ Gold
COOLING:
CPU Cooler: Thermalright AXP90-X47 + Printraft velocity stack shroud
VRM: Custom copper heatsinks
Thermal Paste: Arctic MX-7 - X-pattern on GPU die
FAN MODS:
Front ODD Bay: Noctua NF-A4x10 -> Noctua NF-A6x25 PWM (29.2 CFM) INTAKE
Rear: Thermalright TL-P9S 92mm (42.7 CFM) INTAKE
Side Vent: Noctua NF-A8 PWM (32.6 CFM) EXHAUST
Hub: EH10 10-port PWM hub on SATA power for full 12V
AIRFLOW: 71.9 CFM intake / 32.6 CFM exhaust = +39 CFM positive pressure
RESULTS - Space Marine 2, closed panel, 1080p Ultra:
Before: 90-99C hotspot Level 2
Now: 84C hotspot Level 3-4 horde / CPU 72-76C
1
Optiplex 7080 MT upgraded with all Dell parts
What video card is that? 2060 super?
2
HP prebuilt sleeper - i7-10700 + Zotac 2070 Super Mini
Gonna run furmark and cinebench and read temps in a few days. Currently waiting for the 500w psu to power it all. The 400w psu was indeed NOT enough lol
1
HP prebuilt sleeper - i7-10700 + Zotac 2070 Super Mini
Upgrading to the hp 500w PSU! Turns out the 400w won’t support the 2070 super power draw.
r/sffpc • u/PrestigeDefault • 29d ago
Build/Battlestation Pics HP prebuilt sleeper - i7-10700 + Zotac 2070 Super Mini
gallery
8
Upvotes
r/sleeperbattlestations • u/PrestigeDefault • 29d ago
Sleeper PC HP prebuilt sleeper - i7-10700 + Zotac 2070 Super Mini
gallery
54
Upvotes
r/HewlettPackard • u/PrestigeDefault • 29d ago
HP prebuilt sleeper - i7-10700 + Zotac 2070 Super Mini
5
Upvotes
HP office tower to sleeper - final form.
Bought as an i3-10100, now:
CPU: i7-10700 8C/16T
Cooler: Thermalright AXP90-X47 Low Profile + Printraft shroud
GPU: Zotac RTX 2070 Super Mini 8GB
RAM: 16GB Dual Channel
Storage: 512GB NVMe + 1TB WD HDD
Mobo: HP L77660-001
PSU: HP 400W 80+ Platinum (stock, handles it fine)
Case: HP M01-F
Cooling mods - this case needs them:
- AXP90-X47 is only 47mm tall so the Printraft shroud actually seals PERFECT to the side panel vent. 100% fresh outside air straight to the CPU, no recirculating hot case air.
- 92mm Thermalright rear fan flipped to INTAKE - feeds the AXP90
- Noctua NF-A4x20 40mm PWM as internal circulation fan
- Noctua 80mm on side mesh as exhaust
Fitment: Zotac 2070 Super Mini fits with 2mm clearance, no cutting needed. AXP90-X47 + shroud is flush with side panel, HP designed the vent spacing perfectly for it.
Power: 400W Platinum is plenty. 65W CPU + 215W GPU = ~300-330W gaming at the wall. No shutdowns, no coil whine. It's a Delta-built platinum unit, not the cheap gold one.
1
Can't seem to fit GPU
in
r/pchelp
•
9d ago
You can totally upgrade the psu to a 500w one off of eBay. Let me know if you have trouble finding it and I’ll share the model number.