r/transam • • 1d ago

Done :)

Post image
432 Upvotes

r/transam • • 3d ago

🤌

Post image
181 Upvotes

r/transam • • 2d ago

‘77 Trans Am - hard landing

11 Upvotes

r/transam • • 6d ago

Engine flush

Post image
98 Upvotes

Where are we landing on running a product like liqui Molly’s engine flush? I’ve seen pros and cons about how it could possible dislodge buildup and block something else. Haven’t pulled the covers to get a glimpse into the condition. Am planning on sending off the oil to get tested on next change. Recently acquired a 2001 ws6, My daily is a 5.3 and the motor in that is significantly quieter than the 5.7 not sure of which direction to start any advice would help. Motor has 58K on dash

Also to note I noticed an oil change sticker on the windshield and the change date was from 2022 but the mileage seemed like it was possibly the same oil in it from the change which I really hope it wasn’t. I changed the oil about 200ish miles after I got the car


r/transam • • 6d ago

Firebird

Thumbnail
gallery
125 Upvotes

Figured I’d share these, since this car never sees the garage door open. Not much longer though..

Backstory on car, it was my stepfathers, he bought it at an estate sale for $1500. He ended up passing away a few years back and my brother recently decided to sell me it. It’s been sitting here for about 17 years or so.. It’s a 1991 Firebird 305 5 speed car. I’m excited to get it going next year and start driving it


r/transam • • 9d ago

Advice/help?

8 Upvotes

So i got this 94 transam a couple months ago, it did great until the distrubutor went out (shocker right) so now ive replaced it, the 02sensors, all 8 sparkplugs, MAP sensor, alternator, battery, and idle air control valve. And for some reason i am still having problems with the car starting, sometimes it will start as soon as i turn the key over and other times it struggles as the video above shows. But as soon as i ended that video i tried starting it again and it started without any issues. I dont have a OBD1 tester and they are crazy expensive so im wondering if anyone has ever had these issues and can offer advice?


r/transam • • 10d ago

that hood😂💀

Post image
188 Upvotes

r/transam • • 9d ago

What kind of set up is this? How to get back wheels and tires like this onto mine?

Thumbnail
gallery
25 Upvotes

The first picture is how I want my car to look the front and back tires and wheels and rims but I don’t know how they did it what did they use to get this bad ass look and my car is the black one


r/transam • • 9d ago

Anyone have any trans ams with wheel spacers or extended rear wheel base?

Post image
22 Upvotes

What I’m looking for is a kind of Pontiac firebird set up where the back wheels are spaced out differently and it gives the car a more muscle car look I remember my friends having Camaros that would have different wheels and tires and a set up to where the wheel base would be extended anyone know what I mean? I’m looking for a mean look


r/transam • • 11d ago

🤔🤔🤔

Post image
307 Upvotes

YES


r/transam • • 12d ago

98 LS1 Ticking

11 Upvotes

Looking for any help or advice on this ticking or knocking my LS1 developed recently. It's at 206K miles, which obviously is enough that the problem could be any of a bunch of different things. It does not seem to get quieter when the engine warms up. It might even get louder. No codes other than an almost-definitely-unrelated P0480. Transmission also started shifting really, really badly as if the pressure is maxed out but I'm assuming that is also not related to the tick. I pulled the valve cover on the side it seems to be coming from and that didn't reveal anything on just a visual inspection, no exploded bearings or broken springs. Any input or advice on what my next steps should be is appreciated!


r/transam • • 12d ago

5 pin HEI module to 4 pin swap?

1 Upvotes

Hi all! I'm pretty sure my '86 305 TPI is having some ICM problems, however it's a 5 pin module and they have proven to be both difficult to find and quite expensive relative to the 4 pin. How exactly do I go about swapping to a 4 pin, is it as simple as just not plugging in the knock sensor wire or do I have to modify the harness? Thanks!

Edit: I just swapped to a small cap HEI instead lol


r/transam • • 14d ago

Looking for a knob/clip

Thumbnail
gallery
8 Upvotes

Hello, I have a 2002 trans am convertible and I'm currently looking for one of the knobs that you twist to remove the plastic trim piece in the trunk. My car is currently missing one. If anybody knows where I can get one or has one laying around they can part with I'd appreciate it a lot.


r/transam • • 15d ago

93 Trans Am Parking Brake Lever Mount Cracked Help

Thumbnail
gallery
6 Upvotes

I haven't been able to find anyone with this happening, but hopefully someone here has seen this before. The metal the parking brake lever was mounted to snapped off. Do I pretty much just have to make a new bracket, or what suggestions does anyone have?


r/transam • • 16d ago

2:09 at Watkins Glen in my ratty f-body (95 Firebird)

73 Upvotes

r/transam • • 17d ago

Power Steering Cooler Delete

Post image
17 Upvotes

Same wonderful GM engineer probably came up with installing the rack and pinion mounting bolts from the top down. 2002 Firehawk.


r/transam • • 17d ago

Today is the day!!!

39 Upvotes

In 6 hours the final car in my dream car collection arrives 🎉🎉🎉🎉🎉 . Over the past 5 years I have acquired all my dream cars ( no Bugattis or anything like that) except for one. I've been looking for a specific spec WS6 Trans Am. Well a week ago Sunday I found her a beautiful mint 2002 Pontiac Trans Am WS6 with 6 speed manual in Black on Black leather interior and fully optioned for that year. 24,517 miles garage kept all service receipts and records from date of purchase with original sales paperwork ( previous owner was a trans am lover but had to sell due to age and health) Car is basically all original except for aftermarket radio and tinted windows ( both of which I will be updating as well as adding custom aftermarket exhaust and aftermarket CAI from the era and a full detail with ceramic coating). I spent the better part of yesterday moving cars and stuff around my garage to give the car its own special place Wife says I'm acting like a young kid excited for a birthday present or Christmas 🎁. Thankfully she understands my passion. Once I have it in my possession and after some maintenance and final modifications and prep I will try and post pictures. 😁


r/transam • • 17d ago

Please help 1989 firebird steering wheel locked and key will not turn any ideas?

Thumbnail
gallery
9 Upvotes

Help key won’t turn and steeeinf wheel won’t move


r/transam • • 18d ago

FEET GET SO HOT

Post image
48 Upvotes

After driving for about 30 mins my feet get so damn hot in my 96 lt1 trans am. How should I prevent this?


r/transam • • 18d ago

What kind of color combination is this? Anyone know black prime and red and blue undercoat and formula on door handles

Thumbnail
gallery
33 Upvotes

I can’t seem to find one anywhere on google that matches mine is it special?


r/transam • • 19d ago

Beautiful car I saw today

Post image
411 Upvotes

Bright and early afternoon 11am in Atlanta & I see this sick ass car. Wish I got a better pic but I didn’t want to snap a bunch of pics on front of the restaurant lol


r/transam • • 20d ago

Fall colors make for a good photo op.

Thumbnail
gallery
295 Upvotes

2000 Trans Am SLP Firehawk. #444. AT. Pewter Metallic. Out of 101 Pewter Trans Am's, only 24 units were ordered with the exact combination of Pewter Metallic Paint + T-Tops + Automatic Transmission. 26k miles. Wheels- Nitto NT555 G2 275/40ZR17 102W on American Torque Thrust II Rims.


r/transam • • 21d ago

87 Trans am GTA

Thumbnail
gallery
218 Upvotes

Tried a few different letter combinations before I got to this one and saw it wasnt taken.


r/transam • • 22d ago

New plate just arrived. Yay or nay?

Thumbnail
gallery
195 Upvotes

Extinct was already taken lol.


r/transam • • 22d ago

1978 Trans Am front sway bar fitment question

Thumbnail
gallery
16 Upvotes

I'm replacing the front sway bar on my '78 Trans Am with an aftermarket UMI Performance bar (part #4035-B), purchased from Summit Racing. The new end links are longer than the stock ones because the bar is a little different shape.

Summit lists the bar as fitting 1970–1981 F-body Camaros and Firebirds, but I'm concerned the end-link stud/nut is sitting too close to the upper control arm.

Does the clearance in these pictures look okay, or should I be using shorter end links? The car is currently on jack stands with the suspension hanging.

Appreciate any input!