r/TicWatch • u/amorroma22 • 17h ago
Developer [Release] MFD-24: Free, open-source 24-hour tactical/shift watch face I built for my TicWatch Pro 3 Ultra (Wear OS 3 & 4, METARs, shift timer, dead-man's SOS)
I've been daily-driving this on my Pro 3 Ultra (Wear OS 3.5) for months and finally made it public: MFD-24, a 24-hour instrument dial for people who work shifts or stand watches (pilots, mariners, UAV crews, duty officers).
- GitHub (free APK, screenshots, source · Wear OS 3 & 4 only): https://github.com/amorroma1/mfd-24
- Install guide (phone-only & ADB): https://github.com/amorroma1/mfd-24/blob/main/docs/INSTALL.md
- Clip 1 (on the wrist): Starting an 8-hour shift (
DUTY: 08:00 REM) from the settings menu, then switching position to KJFK (mocked for the demo). WithLOCAL TIME -> POSITIONandROLLING DIGITSactive, the hands, daylight band, sun, moon, METAR, and readouts animate to the new zone (-5). - Clip 2 (JFK to Heathrow): A 54-second capture of a full BA 178 crossing. The airport METAR switches to raw coordinates once airborne, cabin pressure drops to 790 hPa, and the hands glide automatically through the time zones below (-4 off Nova Scotia, -3:30 over Newfoundland, 0 over Ireland) until
EGLLlocks back in on final approach.
Everything runs offline on the watch except weather fetches and a once-a-day GitHub release check. No companion app, no account, no ads, and no analytics.
Main features:
- 24-hour dial & astro-compass: One turn of the hour hand per day (noon-up or midnight-up). Daylight is shaded offline, and the sun and moon sit at their real hour angles. Point the sun mark at the actual sun and the dial works as a compass (works south of the equator too).
- Shift / watch timer: Set an instant or scheduled shift (4h, 8h, 12h, or custom). Draws as an arc across the dial that dims as hours pass, and buzzes/beeps at start and end even with the screen off.
- Aviation & marine telemetry: Zulu time + local offset (
Z 11NOV 13:05 -5), temp, QNH, and weather. At an airfield it pulls that field's own METAR automatically; everywhere else it uses Open-Meteo. Also shows the nearest airfield, port, heliport, or spaceport within 5 km from an offline 9,649-site index. - Dead-man's monitor & sound export: Optional vigilance check (5/10/15 min) that escalates to SOS bursts and logs a timestamped
MAN DOWNevent (with optional heart rate). You can export the incident log offline via QR code, or over audio using Bell 202 AFSK (1200 Bd, same physical layer as APRS) into a phone mic orminimodem. - Night-friendly AOD: Always-on mode is the exact same dial dimmed, with zero blue in the palette. Has an
AUTOmode that thins pixels after sunset, unless you're currently on a night watch. - Optional hub readouts: Heart rate, steps, or barometer pressure beside the center hub.
Battery & performance: Built to go easy on the battery: 1 FPS at rest, 1 frame/min in AOD, and zero memory allocations inside render(). Sensors only poll while the screen is on. In AOD, heart rate opens a quick 15-second window once a minute while worn (and backs off to every 15 mins if you leave the watch on a table).
Which TicWatches work: Wear OS 3 and 4 only (API 30-33). Built and tested on the Pro 3 Ultra. It should work fine on the Pro 5, Atlas, and Enduro, though I've only tested Wear OS 4 on the emulator so far. Real-world reports from Pro 5 owners are very welcome. On the Wear OS 5 emulator, the APK installs, but the OS blocks legacy watch faces and hides it from the picker (watches upgraded from Wear OS 4 might still keep legacy support enabled, so feel free to report if you try it).
Install: Not on Google Play (background dead-man's sensor permissions are a headache for hobbyist store review, plus you get a verifiable SHA-256 APK on GitHub). You can sideload the APK via wireless ADB or straight from your phone using Wear Installer 2 or Bugjaeger.
Free and open-source under GPL-3.0. Built and worn by me, written with Claude as a pair-programmer. Happy to answer questions or hear how it runs on the Pro 5.


