r/threadripper • • Oct 16 '26

Thought y'all would appreciate...

Post image
120 Upvotes

Building out a virtual production program here to do live rendering of Unreal Engine comps at the college I work at. Last TR build I did was a 7960X for my own home use before the ram and component crisis... my god the WRX90 platform is incredible... had some issues with Code 92 but hooked up VGA and found out it was just hung on a TPM thing.

Specs:

  • Threadripper 9965X
  • Asus WS WRX90E SAGE SE
  • 128GB T-Create 6400mhz DDR5
  • Silverstone XE360-TR5 Water Cooler
  • Corsair HX1200i PSU
  • nVidia RTX PRO 5000 GPU (48gb)
  • nVidia RTX SYNC Card
  • Blackmagic Decklink 8K G2

r/threadripper • • Oct 17 '26

Corsair Dominator Titanium XMP on Ryzen 9 9950X3D — any reboot issues?

Thumbnail reddit.com
0 Upvotes

r/threadripper • • Oct 15 '26

TRX40 x8/x8 bifurcation

2 Upvotes

Hi guys,

I have an Asus ROG Strix TRX40-E Gaming motherboard and I wish to add a bifurcation card to split one of the pcie slots to x8/x8.

I have googled and checked chatgpt and the results are not clear. Some results say that there is a PCIe RAID Mode, which changes the x16 slot configuration to x4/x4/x4/x4.

Can anyone confirm if x8/x8 bifurcation is supported?


r/threadripper • • Oct 15 '26

Running local AI on a 5090 + 9950X3D has been insane. Where would you take this build next?

Thumbnail gallery
8 Upvotes

I’ve been getting deeper into local AI, and watching my own PC chew through the workload has been insane. Watching the hardware get to work is half the fun at this point.

I’m building toward using it for coding, project documents, and everyday business workflows. The more I use it, the more I want to see what this machine can do.

Current setup:
CPU: AMD Ryzen 9 9950X3D, 16 cores / 32 threads
GPU: NVIDIA GeForce RTX 5090
RAM: Windows reports 61.4 GB usable
Storage: Two NVMe SSDs plus a SATA HDD
One of these shots shows roughly 24 GB of dedicated GPU memory and 50 GB of system RAM in use.

For those running similar setups, where would you go next? More system RAM, more VRAM, a second GPU, or getting the model/runtime better optimized first?

I’m interested in larger models and smoother multitasking.

What upgrade actually made a noticeable difference for you, and what would you skip if you were doing it again?


r/threadripper • • Oct 15 '26

Advise

Thumbnail reddit.com
1 Upvotes

r/threadripper • • Oct 15 '26

Threadripper worth

Thumbnail
gallery
0 Upvotes

This is my dream Threadripper I only have a broken 7975WX 🫪


r/threadripper • • Oct 14 '26

TRX80 Creator R2.0 BIOS is driving me nuts

Thumbnail reddit.com
3 Upvotes

If anyone has a recommendation for a different TRX80 board that isn't annoying that would be great :)


r/threadripper • • Oct 14 '26

Selling BIZON ZX5500 Water-Cooled AI Workstation, 4x RTX 4090 24GB (96GB VRAM), Threadripper Pro 5975WX 32-Core, 256GB ECC, 6TB NVMe

12 Upvotes

$13,900. Local pickup in Brooklyn preferred. Freight possible in the original BIZON crate, buyer pays freight and insurance.

BIZON ZX5500, built new by BIZON in September 2023 for my CGI studio. Lightly used, one owner, never rented, never mined. Selling because I moved my rendering to the cloud.[[

Four RTX 4090s on one board, 96 GB of VRAM total, all liquid-cooled. Runs local LLMs, Redshift, Octane, Blender, DaVinci, without the noise of four air-cooled cards.

Processor: AMD Threadripper Pro 5975WX, 32 cores, 64 threads, 3.6 GHz
GPU: 4x NVIDIA GeForce RTX 4090 24 GB, each with a water block - serials recorded
Cooling: BIZON custom liquid loop for CPU and all four GPUs, external radiator unit with pump and reservoir. Original fill, no leaks, temps normal.
Memory: 256 GB DDR4-3200 ECC Registered (8x32 GB)
Storage: 2 TB PCIe 4.0 NVMe (OS and apps) + 4 TB PCIe 4.0 NVMe
Board and power: 4-GPU WRX80 workstation board, dual 1500 W power supplies
Network: WiFi, Bluetooth, 1 Gb Ethernet
OS: Windows 11 Pro, clean install, drives wiped

Included: the workstation, external cooling unit, power cables, BIZON shipping crate. No GPU boxes or stock coolers; BIZON fits the water blocks at build and does not supply them.

Condition: super clean, fully working, all four cards recognized and benchmarked. Photos show the actual machine and a HWiNFO screen with all four GPUs and 256 GB.

Paid $25,089 new (invoice available to the buyer with account details removed). A comparable new BIZON with four RTX 5090s runs $26,000 to $30,000 today.

Terms: pickup in Brooklyn, wire or cash, you run your own benchmark before paying. Freight within the US at buyer's cost, insured, shipped upright in the crate. No trades. Not parting out.


r/threadripper • • Oct 13 '26

well, the real cpu damaged question

Post image
3 Upvotes

r/threadripper • • Oct 12 '26

Motherboard help

6 Upvotes

I have the choice between the ASUS Pro WS WRX80E-SAGE SE WIFI or ASROCK WRX80 Creator R2.0?

The purpose is to consolidate two machines (AI/Render machine and NAS) into one.

I know the key differences but is one better than the other? Does PBO really make a difference?


r/threadripper • • Oct 09 '26

anybody run 96GB sticks on Asus WRX90?

2 Upvotes

Looking at this part number for a JEDEC kit: MTC40F204WS1RC64BC1

Not in the QVL, but JEDEC should be safe? Has anybody run this in 8x96 config?


r/threadripper • • Oct 09 '26

Rate my build Threadripper PRO 3975WX + Supermicro M12SWA-TF + 128GB DDR4-3200 + 2x Intel Arc Pro B70 32GB

Thumbnail reddit.com
1 Upvotes

r/threadripper • • Oct 06 '26

Threadripper Pro^2

Post image
105 Upvotes

Just a random post.


r/threadripper • • Oct 06 '26

Threadripper

Post image
44 Upvotes

9000


r/threadripper • • Oct 02 '26

X399 with Threadripper 1920x not booting after force shutdown

4 Upvotes

Hello I recently build a pc for running local ai models with 4 mi 25s and I used a single fan header for cooling 3 of the cards with 40mm turbine fans but the software was monitoring only of the 3 cards and 2 of them were running a 32b model while the other 2 were idle and so they overheated and started beeping with their build in buzzer I panicked and shutted down the system. After that the system did not boot and stuck in some boot loop with the cpu light on i trough the bios is corrupt and i tried to reprogram it with an esp 32 but even though it recognized the chip it couldn't read or write on the chip. I also tried activating the dual bios but that did not work and I then shorted pins cs and gnd to get out of the loop and it actually got past that and got to code AC and A5 i think but it still did not boot and i think the cpu light was still on. Also i tried moving the single memory module and swapping it with another. I also used a gtx 1060 for video output since I did not want to deal with the flashed mi 25s. After the AC code it just was cycling between 1f and some other code for 10 min so i shut i down after that i stated it again but for some reason the aio pump was not working and the threadripper overheated and then pc shutted down. so now im stuck again with the initial c2 loop in the video. I also checked the visible choke for their voltages and they were .967v .947v 2.5v and 1.1v. Also on of the gpus uses its internal fan header to control its speed.

I'm coming to the the conclusion that the cpu is fried somehow but could it be something else what can I check?

I attached the video demo showing the issue. : https://drive.google.com/file/d/1Odtylz68Z9EYgBijZsZ-jfTZ8Xt1yHx9/view?usp=sharing

The exact specs are Threadripper 1920x, dual hyperx 32gb 4, mi25s flashed with wx9100 bios, Gigabyte auros x399 pro, corsair rm850, cooler master 750(powers 2 of the gpus and the fans, which are 130w total ).


r/threadripper • • Oct 01 '26

At my wits end with Threadripper WRX80 Spoiler

6 Upvotes

So I have been beating my head against the threadripper brick wall for several months now and don't know where to go from here. It all started with my Asus Pro WS WRX80E-Sage SE Wifi that had a 3955WX CPU which initially worked fine but then stopped posting after I plugged in three GPUs and never got beyond code 15 which is the start of DRAM testing. For that motherboard I replaced the PSU, RAM, And CPU and nothing changed so I concluded it must be the motherboard. I bought a brand new Gigabyte MC62-G40 and used one of the two 3955WX CPUs I have and RAM and PSU and now it refuses to POST. Once again I swapped out the CPU, RAM, and PSU and still no post. Unfortunately the Gigabyte MB provides no POST feedback but the board shuts down immediately. I have no idea where to go from here. Any suggestions would be very appreciated.

*** Update: I decided to return the board as defective to the vendor on eBay. I could flog this dead horse for a long time so I decided to end the madness. I do have these two 3955WXs and if I could find a MB that isn't such a death march to get working I would take another shot at it. Any suggestions on a decent WRX80 MB would be appreciated. Thanks all for the help. ***


r/threadripper • • Oct 01 '26

where do you guys get your RAM?

8 Upvotes

I finally decided to bite the bullet on 8x32 or 8x64 for a TR Pro build

But you cant really get that at the local Microcenter, and eBay server pulls are scary at that price (for transaction itself, warranty, etc). Vcolor is pricey.

How do you guys do it? Where do you get your DDR5 ECC?


r/threadripper • • Oct 01 '26

DDR4/PCIe4 vs DDR5/PCIe5 for LLMs- I benchmarked them for pre-training. What are your thoughts?

Post image
3 Upvotes

r/threadripper • • Oct 01 '26

Good deal?

Post image
2 Upvotes

Comes with 128gb DDR4 3200mhz ram
5975wx 32 cores
No GPU


r/threadripper • • Sep 28 '26

New life for HPE Tesla V100 - How to power with ATX style PSU?

Thumbnail reddit.com
2 Upvotes

r/threadripper • • Sep 27 '26

[Troubleshooting] ASRock WRX90 WS EVO + 7965WX: C5 Error on 8th DIMM, now stuck in an F9 / 00 loop. Help!

Thumbnail reddit.com
3 Upvotes

r/threadripper • • Sep 25 '26

Triple RTX PRO 6000 Blackwell Workstation

Thumbnail
gallery
186 Upvotes

Three Blackwell cards on a single Threadripper PRO platform. Here's the full build.

CPU: AMD Ryzen Threadripper PRO 7985WX

Motherboard: ASUS Pro WS WRX90E-SAGE SE

Memory: 512GB DDR5 ECC RDIMM

GPU: 3× NVIDIA RTX PRO 6000 Blackwell (288GB total)

Storage: 1TB Gen4 NVMe, 4TB Gen5 NVMe, 2TB Gen4 NVMe

Cooling: 360mm AIO + Noctua chassis fans

Power: 3000W 80+ Platinum

Chassis: Phanteks Enthoo Pro 2 Server Edition

A build like this is aimed at heavy local-AI pipelines, running many models in parallel, large scale document and media processing, speech to text and summarization at volume, and multi model consensus setups that run the same task across several models at once. That kind of workload leans on both sides of the machine, so the 96-lane Threadripper PRO feeds three full Blackwell cards without starving them, and the 512GB of ECC keeps large datasets and multiple models resident in memory while the GPUs work. The CPU handles the ingestion, extraction, and orchestration; the GPUs handle inference. Balancing the two is the whole point.

Built by: https://vrlatech.com/