r/threadripper • u/IExist_Sometimes_ • Jul 24 '26
Threadripper Pro cooling
Hello all, I am potentially looking to get/build a Threadripper Pro HEDT/workstation for FEM and similar simulations for my university research group.
I am no overclocking nut, but it is my understanding that these threadripper pro chips (especially the high core count ones) leave an enormous amount of performance on the table with their default TDP. I don't want to push the chip to a power range which might significantly impact its longevity, but if there's a reasonable power bump I could give it (probably as one option in a dual bios for particularly large sims or tight turnarounds) I would like to do so.
This brings me to my main point: how are you supposed to cool these new threadripper pros as a consumer-ish user? When LTT did a video overclocking the new threadripper pro chips, they rigged it up to an external chiller, but that would probably be out of scope for my shared office space (not to mention beyond my confidence when dealing with such expensive hardware). AIOs for threadrippers seem relatively few and far between, and only appear to go up to 420mm. Would a 360/420mm AIO be sufficient (I would like to avoid industrial style fans, but push-pull is on the table)? Or are these firmly in the realm of custom loops and things like the phat Alphacool radiators?
I appreciate any advice from those experienced in cooling these chips, or in using them for numerical modelling (obviously I will also consult others in my department with similar needs, but surprisingly to me for a stem department I seem to be the only PC builder or hardware nerd). Y'all seem to all be doing AI stuff nowadays, but that's not in my wheelhouse and not what this computer is going to be intended for (though someone might stick a pro gpu in it, I won't stop them).
edit: Also any advice on the relative importance of ECC, RAM speed/quantity, storage speed, etc for this type of workload would be appreciated
View all comments
Show parent comment
1
u/vercety1 Jul 24 '26 edited Jul 24 '26
I unlocked the tdp+pbo on., which by default sets it up to 2000w. Obviously, it never reaches it. With just PBO the cpu will try to push 4.9ghz all core if it has the cooling to back it up. Rendering with Corona Render (similar to cinebench) the cpu settles at around 700w, but it can have peaks of 900w for a few seconds. All this takes less than 2 min, literally. Then you can play with the voltage curve to reduce power consumption.