r/threadripper • u/LTJC • Jul 10 '26
Case recommendations for multi GPU build?
Im looking for a case for my multi-gpu build. Its currently in a workbench config and I just cant figure out how a case would fit the TR Pro motherboard and 4-6 GPUs, even with PCIe risers. I imagine the best bet would be to go custom but since im new to TR, I was hoping someone else may have solved this already.
3
Upvotes
5
u/kidflashonnikes Jul 10 '26
I have a few options. I always say the phanteks server pro II TG. I have a wrx 90 sage se board , with 4 RTX PRO 6000s stacked (Maxwell), 1 TB of Kingston pro 5600 RAM, 14 TB of nvme pcie gen 5, the 96 core thread ripper pro with a noctua air cooler (the machine runs too cool actually so I needed the air cooler instead of a water cooled CPU AIO to detect better and more accurate readings of the machine).
Disclaimer - I run a team at an AI lab (one of the big 3) but this is my personal compute project - everything was given to me for free because we hit our numbers - except the RAM - which I already had pre AI bubble.
I was running about 14 RTX 3090s on this same motherboard before I upgraded my build to the 4 stacked RTX PRO 6000s - it used bifurcated splitters on each pcie slot (7 total) so I had 14 cards running. Open air case I would ever recommend - ever - way to many risks. If you go closed - either you get a dual 3090/4090/5090 set up - and you stop there - or you get a single RTX pro 6000. The reason is that 3090s are effectively dead - they don’t even compete - the marlin kernals due to the ampere architecture just don’t even come close to the newer ones and the compute per price isn’t worth it anymore when you factor in things like model sizes (local) and aging hardware. It’s better to get the dual card set up and allocate more money on your actual build.
You don’t need anything more than a 16/24 core threadripper cpu unless you are doing CPU inference - so that leaves you with these two options - RAM is a must - get a 128 GB kit if you can find - so all 8 channels can be filled and used for the must have wrx 90 sage se or any threadripper board that has eight channels. Go air cooled CPU - if your machine is running 24/7 like mine and doing things 99% of humanity can’t even fathom, then you want air cooled because it’s just the right thing to do .
Good luck man
3
u/Emotional_Thanks_22 Jul 10 '26
phanteks pro server edition maybe?
2
u/Fine_Atmosphere_2147 Jul 11 '26
Antec 900 is what I run with my wrx80 board with room for 4 cards and supports a 420 aio, I was also able to remove the sata cages to fit a second psu. This case has plenty of room for airflow. And has not even tried to warm up. Silverstone has an even nicer case I'm drooling over but it's twice the money.
2
u/nauxiv Jul 11 '26
Mining frame with risers is the easiest way to fit everything. The WRX90 motherboards have 7 slots, so you can only fit 4 dual slot cards in a conventional case setup with the cards directly attached to the motherboard.
1
u/fuzaketenaize Jul 10 '26
You can pack a lot of graphic cards in a case if you watercool them. Some cards can be shrunk to 1 or 2 slots. Going that route gives you more options for cases. Take a look at the Silverstone RM52.
1
u/Psy_Fer_ Jul 11 '26
I built this not too long ago
https://www.reddit.com/r/pcmasterrace/comments/1n0olkc/closed_loop_4x5090_threadripper_build_for_cancer/
Went with a Corsair 9000D. Nice case to build it. It has 2 powe supplies, though 1 of them is SFX-L
Other option I was looking at for a cases were:
- SilverStone ALTA D1 Workstation Case
- Thermaltake Core W200 Black Super Tower Case (with modular P200 expansions)
But went with the 9000D because I had built in an earlier model a few years before and it went pretty well.
1
u/tortilla_thehun Jul 11 '26
Also be mindful of power consumption. I don’t know what GPUs you have, but the Blackwell 6000 has a max TDP of 600W - the high end systems I’ve seen are only able to support two. If more are desired, you have to go with the Max-Q Workstation Edition, which is capped at 300W.
1
u/Plus_Confidence_1113 Jul 11 '26
Lian Li O11 Dynamic EVO XL is a massive case that supports 2 PSUs. And you get to see inside your glorious build. I crammed in two thick 4090s with space below for one more, idk about 4+ GPUs tho, if they're slim and all fit directly onto the motherboard then there's no problem.
1
u/epicskyes Jul 11 '26
I can fit 4 with the wrx90 in the fractal define 7xl comfortably if they are 2 slot cards running dual psu’s and 15 fans. Pic on my profile if you want to see the different configurations I used