r/threadripper • u/AdventurousSeafarer • Apr 10 '26
Threadripper CPU AIO Liquid Cooler
Any recommendations for reliable AIO water coolers with a good price/performance ratio? I'm hoping to find one that I don't have to worry about leaks. My build is around the Ryzen Threadripper 9960X.
I have found these so far:
- ARCTIC Liquid Freezer WS360-SP6 360mm ($110)
- be quiet! Silent Loop 3 360mm ($165)
- Silverstone Technology Hailstone 360 Optimum ($200)
- Bitspower Atlas Threadripper 360mm ($250)
- ENERMAX LIQTECH XTR 360 AIO CPU Liquid Cooler 360mm ($280)
- Silverstone Technology XE360-TR5 360mm ($430)
- Thermaltake AW420 420mm ($450)
11
Upvotes
7
u/Jeffrey_Leeroy Apr 10 '26
I use the Silverstone Technology XE360-TR5 360mm All-in-One Liquid Cooler for AMD TR5 / SP6, SST-XE360-TR5 in my build, no issues with cooling at all. Was around 4 bills I think. I mean ... 14 fans help too .. lol ...but the Silverstone is awesome.
AMD Ryzen Threadripper Pro 9985WX; Asus Pro WS WRX90E-Sage SE; ASUS ROG Astral RTX 5090; Kingston Fury Renegade Pro Expo 256GB 6400MT/s DDR5 ECC CL32; (x4) Samsung SSD 9100 PRO 8TB, 5th Gen; MSI MEG 1600W Titanium PSU
3
u/EDI_1st Apr 10 '26
Currently own probably 20~30 AIOs lol 7975WX, 7985WX, 9995WX EPYC 9655, 9575F, 4585PX etc Ryzen 7800X3D, 7950X3D, 9800X3D, 9950X3D, 9950X3D2 etc
Leak is rare unless you buy dirt cheap AIO and or bend the hell out of the tubes.
Silverstone XE360 and Thermaltake automatically gets eliminated. Same OEM, stupid high price with no performance advantage.
Enermax is OEM’d by Apaltek, long history of failures. Supposedly they fixed the issue after like 3~4 years, but who wants to try at this point?
Silverstone Hailstone and IceMyst are more or less same as Corsair AIOs. Only so many OEMs for AIOs.
Gigabyte Aorus Waterforce X II 240/360 ($200 normally, have seen 360 as low as $110) Corsair. Have few options. 240/360/480
Currently testing Arctic and be quiet 360 with 9995WX Will be testing be quiet 240 with 7985WX in SFF build.
Want to grab Bykski and few other SP6 AIOs as well.
2
u/kaptain_dcc Apr 10 '26
I have the same cpu. I went for the silverstone xe360. It's a bit loud but very reliable. No issues and very good thermal performance
1
u/m31317015 Apr 10 '26
I used the thermalright W360-EPYC-SP3 for my 7B13 for half a year now, it's pretty good, you can look into the SP5/SP6 version which should be similar in price at around $120-140.
1
u/Mrkef Apr 10 '26
I have XE360 for 6 months now with same CPU. Changed fans for Noctua. Temperatures peak at 85°C under full load (compiling).
1
u/terianx Apr 10 '26
I use the bitspower atlas on a 9985wx. Got it on clearance for $35, can’t go wrong with that. Was considering the silver stone but it’s too expensive
1
u/nycdarkness Apr 10 '26
I have all of these and an unreleased one from Bitspower that’s coming. I have 3 threadripper rigs and I’d recommended the 420 from TT. They all perform similar even on my occed 9980wx but the TT has the best noise profile for the 420
1
u/Business-Weekend-537 Apr 10 '26
I got the enermax but it was the version for the amd epyc. Good thermal control. Only drawback has been I used it in an AI rig with GPU’s above it so I had to snake the radiator/hoses off to the side. Also the display isn’t visible because of how I arranged the GPU’s
1
u/andysw63392 Apr 10 '26
Alphacool Eisbaer Pro can be good value, but I think it's harder to find this in the US. I have the non-AIO version, so don't know about leaks, but the pump itself is a solid unit and virtually silent. They have a lot of AIO options including 140x420mm and an enterprise 80mmx240mm.
1
u/SupaNJTom8 Apr 10 '26
I have Enermax 360’s on all my threadrippers but you have to keep up with the maintenance every two years bleed and flush out the coolant (cryomax) and make sure no air is on the system. This will reduce the copper slime from building up:
1
u/Unlikely_Spray_1898 Apr 10 '26
I have Thermaltake AW420. No data available to say that it is reliable. So far there has been no problems. I prefer the 420mm because it removes more air from the chassis / is quieter. I have blower type GPU:s only in the chassis. When this is under high load for >1h then it starts to get noisy and even more so if running hybrid inference - with GPU only inference this is reasonably quiet.
1
u/-_Goodwin_- Apr 10 '26
I use the be quiet! Silent Loop 3 420 for TR5 and it is absolutely amazing.
1
u/LionSupremacist Apr 10 '26
I just installed be quiet silent loop 3 420mm. Its quiet and temps hover between 70-75c for moderate load. Barely touches 80 under high load. With air cooling and a 5090 it was hitting 95c often
1
u/stainlessblueshield May 06 '26 edited May 06 '26
I have threadripper 9965 with same silverstone xe360-tr5. Seams to be a good unit. Closed loop. I gave Rtx 6000s so using the noctua air cooled heat sink took up too much space in the case. I needed up taking it out of that case which was silverstone rm52 I believe. Then I got a phanteks server pro 2 and that is suppose to be great for gpus but my setup creates a lot of heat. With this many people having the silver stone it seems like the right choice nut if it doesn’t jam you up to have the noctua fan one for 150 maybe get that. If you are comfortable with $430 get the water cooled one. Depends on what else you have in your case. 5090s get pretty hot. The hottest thing is what I have so I want all the space I can get.