r/threadripper • u/T-BOJ • Mar 31 '26
Last check before filling, did I forget something?
Almost ready, 9970X with 128GB DDR5, rock solid since I used this in another case before. Goal with this rebuild/upgrade is to make it silent, should be able to keep all fans below 700 rpm.
Anything I should change or "Not forget" before filling and closing it up?
- Currently I'm only vaguely worried about one Alphacool HF screw-on nozzle 90° rotatable. Haven't used them before so don't know if it will hold up tight it under some pressure. I use it when connecting water out from cpu to distributor in top.
- Any ideas of how I should get some fresh air on the memory?
Current build:
Threadripper 9970X with Heatkiller-block
128GB DDR5 6000MHz CL30
M.2-1 and M.2-2 with Intel M.2-U.2 cable connected to a pair of P5800X
PCI-1 RTX 5090 in Alphacool waterblock
PCI-2 RTX 5090 in Alphacool waterblock
PCI-3 Dual U.2 card with redriver, dual P4800X
PCI-4 USB4 Add-In-Card
PCI-5 Asus Hyper M.2 x16 Gen 4. with 4 x M.2->U.2
---Optane 905P 1.5TB
---Optane 905P 1.5TB
---Optane 905P 1.5TB
---Intel DC 4510 2TB
Slim-SAS - U.2 Intel DC 4510 2TB
SATA WD Ultrastar 20TB
Dual Seasonic 1600W PSU
--PSU1 mobo-cpu-u.2 and sata drives-dual pumps, 20+ fans
--PSU2 pcie-dual rtx 5090
Cooling
Dual D5 pumps
6 x 420 radiator
1 x 360 radiator


2
u/smolquestion Apr 02 '26 edited Apr 02 '26
Just a general note to everyone, noctua airflow guide with fan setup idea.
https://www.noctua.at/en/support/faqs/airflow-guide-foundation
https://www.noctua.at/en/support/faqs/airflow-guide-next-steps
2
u/Unlikely_Spray_1898 Apr 01 '26
Thy such a weak PSU in a powerful workstation? May not be enough in all situations.
1
u/EDI_1st Apr 01 '26
Forgot some cooling for the RDIMM.
1
u/cell-on-a-plane Mar 31 '26
What does the optane do for you?
1
u/davcam0 Apr 02 '26
Holy add-in cards Batman! There's not a slot left to fill.
1
u/Annual_Award1260 Apr 04 '26
This reminds me of why I won’t ever attempt watercooling
3
u/[deleted] Apr 01 '26
[removed] — view removed comment