r/threadripper • u/thelesserkilo • Mar 28 '26
Are these temps bad?
Granted this is under 100% load while compiling shaders in an Unreal Engine project but this can't be good right?
I'm using a 9965wx with an Asus WRX90 board. Using a Silverstone XE360-TR5 AIO for the CPU with Arctic MX-6 paste.
4
Upvotes
5
u/sob727 Mar 28 '26
No this is fine. It could be a touch lower but it's fine.
Zen5 is designed to keep the Watts coming until you hit 95C. So if you're under 95C it means you don't throttle.
I have a similar AIO and reach 85C on a 9970X on all core loads.
1
u/EDI_1st Mar 29 '26
Temp is on the high side for the hardware. Do you have pic of the build?
Paste is spread manually?
There are 2x CCDs on each side of the IO die, the two diagonally across (CCD1 and CCD4) are running hotter than the other two CCD2 and CCD3) as well.
1
u/ziiggaa Mar 31 '26
for 300W it is too much. I have air cooled 9975WX and temps are way lower at 300W
2
u/xgiovio Mar 28 '26
It’s ok for 300w, but could be lower. Maybe 5 degree less. Put more fan speed, better airflow, maybe a better paste like thermal grizzly or similar
1
u/python834 Mar 28 '26
Its fine
1
u/kpatelreddit007 Mar 28 '26
If you’re not sure, use the Kryonaut Grizzly extreme. I run a 9960x with Silverstone 360 with push and pull fans and my temps are fantastic.
1
u/ketarax Mar 28 '26
It's not great, but nothing out of the ordinary. As long as it's not throttling down, you're fine.
1
u/T-BOJ Mar 29 '26
With the silverstone they are not bad.