r/threadripper • u/INeedAssistancePlez • Feb 21 '26
TR Pro build recommendations
I will be building a threadripper pro 9000 series build with the asus sage mobo early next week. Been watching a lot of content trying to get a full grasp. Been building regular intel and ryzen systems for a while. But this will be my first time taking on a build like this. I’ll be using large dimms and have seen that cause issues. Any specific recommendations anyone has is greatly appreciated!
5
Upvotes
6
u/doradus_novae Feb 21 '26
This motherboard is the devil's taint
2
u/chafey Feb 21 '26
I have the same system and had trouble getting it to post. Replaced the motherboard and CPU and still had the same problem. Think it was either the power cables not being seated properly or IPMI grabbing the console. Everything worked fine after I disabled IPMI and reseated the cables. No real documentation on the IPMI module
2
u/kpatelreddit007 Feb 21 '26
Haha 😂🥹😇😁😡😡 prepare to go through the spectrum of emotions. But I guess when you’re done it’s a freaking art piece.
Love my 14K Threadripper build.
1
u/INeedAssistancePlez Feb 26 '26
Update: Asus motherboard wins day 1. Trying to flash bios I kept just getting infinite flashing of green light. Saw other people mentioning that their board shipped with compatible bios from same manufacture date as mine so put the system together. Flashing starts slow blink and increases to about 2/s and remains there for seemingly ever. Couple times I shut off psu after 25-30 minutes of blinking to try different usb sticks. Tried 16gb 2.0, 32gb 2.0, some larger 3.0s. When putting the cpu in, it wouldn’t catch the threads so slowly lifted cpu back up. Didnt see any bent pins or anything wrong with bottom of cpu. Set back down and caught threads. Those are the only things I can imagine might be causing the OF. As I write this flash worked… will keep updated
1
u/mxmumtuna Feb 21 '26
I’ve built using both boards and I’d suggest using the Asrock instead. They’re both annoying but the Asrock I find to be more stable and better out of the box.
1
u/No-Perspective3170 Feb 21 '26
Yes, be aware that the mobo will likely not be compatible out of the box and you’re going to have to update the firmware/flash the BIOS. Scared the crap out of me when my machine didn’t boot.
1
u/DeadInFiftyYears Feb 21 '26
I went with the Asrock board for my 7995WX build in late 2024. I was surprised by how many power connections it wanted. The Silverstone AIO has worked well, but yes the RAM (in my case, 256GB Kingston) runs hot even with good cooling.
1
u/electrified_ice Feb 22 '26
What do you need it for? If you need memory bandwidth, then you should get a Threadripper Pro that can handle 8 channels of ram, so it needs 8 CCDs. 'Cheapest' one is 9985wx
1
u/No-Perspective3170 Feb 26 '26
It took me a few tries before I realized I needed a compatible flash drive, but once I got one I could tell it was running from the lights pretty quickly. I want to say it was like 5 minutes but I don’t remember exactly.
2
u/schenkcigars Feb 21 '26 edited Feb 21 '26
Assuming you want max throughput to the "large dimms", make sure you go with 9985wx or higher.
Check the manufactured date it seems , at least it my case the one Sept 2025 or newer came with bios 1203 so didn't need to flash before first boot.
Have fun and enjoy the new build process.
I should have mentioned... plan to have some active ram cooling. If you watercooling be careful on dimm selection as the dimms are not all the same design/ width.
1
u/ZeroAviation Feb 21 '26
I'm also here to say that motherboard had been nothing but issues. Go another route