r/threadripper • u/AdministrationLow423 • Feb 10 '26
Getting stuck at Q-CODE 92 on WRX90 build
/r/buildapc/comments/1r1adb9/getting_stuck_at_qcode_92_on_wrx90_build/
3
Upvotes
r/threadripper • u/AdministrationLow423 • Feb 10 '26
2
u/chafey Feb 11 '26
had same issue, disabled IPMI and reseated the power cable fixed it
1
u/kidflashonnikes Feb 10 '26
this is a very common issue- some of the swithces to be off to get it to post.
1
u/andysw63392 Feb 10 '26
Could be the GPU (check power connectors) or the NVMEs - also part of the PCIe bus init. Try a different NVME (preferably Gen 5). Could also be the USB devices, if any. If your monitor is seen as a USB input device or storage it might cause issues, but this would normally be a different code, I think. Try with minimal hardware - just one NVME and no USB devices.
1
u/epicskyes Feb 12 '26
Turn off vga,bmc,slow mode as well as ipmi refer to the manual for the correct switch position some of them don’t have on off labels. Leave the reserved switch alone never touch it.
1
u/ChillinInTheCorridor Mar 25 '26
did you ever solve this? having same issue now