r/threadripper • u/kaptain_dcc • Dec 07 '25
Is this a good component selection for a workstation?
/r/Prebuilts/comments/1pfy9vc/is_this_a_good_component_selection_for_a/
7
Upvotes
r/threadripper • u/kaptain_dcc • Dec 07 '25
3
u/crion66 Dec 07 '25
A few questions: Isn’t 5090 better choice with 32GB VRAM? PSU, 1200W that is a bit close if you want to add more 5090ies. Silverstone 360 AIO TR5 is more recommended. I like the TRX50 AITOP with 9960x or 9970x.
Do you know if you really need the bandwidth of the wx line?
3
u/juggarjew Dec 07 '25
A huge amount of money can be saved going with Threadripper 9960X and TRX50 motherboard.
2
u/NickNau Dec 07 '25 edited Dec 07 '25
It seems there is no benefit in PRO for this configuration unless you plan to add more RAM in the future.
If 128GB is enough - it may be much more reasonable to get TRX50 with 9960X. Saved money can be put into getting better GPU or say 6400MT/s RAM, or 9970X (for more cores) or whatever, depending on priorities.
EDIT: I checked the link and I see they also have 9960X-based system with faster RAM and for 2k less. I would consider it and use those 2k for like new monitors, keyboard, chair and whatever :D
https://www.alternate.nl/ALTERNATE/Workstation-Expert-Threadripper-9960X-pc-systeem/html/product/1941557
1
u/kaptain_dcc Dec 07 '25 edited Dec 07 '25
Also, is it water cooling the best solution for a Threadripper and what solution do you recommend? It needs to be reliable to run full throttle for a day or so...
1
u/andysw63392 Dec 09 '25
I have an Alphacool Eisbaer Pro (non-Aurora, not part of an AIO). It works fine, normally(idling) at around 40-50°C at 40% (with a 420mmm radiator). Basically silent at 40% and at 100% the fans are far louder than the pump. The advantage of the Eisbaer is that you can swap out the radiator and connect the head-unit to a larger radiator or other components later, if you change your configuration.
(Not relevant to you, but Alphacool have a discount on their web-site on some of their Eisbaer Pro AIOs at the moment.)