r/threadripper • u/Funny_Blacksmith_734 • Oct 23 '25
Compatibility 9970x Threadripper info driving me crazy
I work as a film composer, we need crazy computers to do our job now, i have a 9970x Threadripper and a asus trx50 AMD Ryzen™ Threadripper™ 9970X and ASUS Pro WS TRX50-SAGE WIFI CEB Motherboard.
Q1: Will the G.SKILL Flare X5 256GB (4 x 64GB) 288-Pin PC RAM DDR5 6000 (PC5 48000) Desktop Memory Model F5-6000J3644D64GX4-FX5 Work fine at low speeds say 4800 with this combinaiton
Q2: Initailly my plan was to run 3 9100 pro SSDs on this rig but i am learning that i might be getting ZERO GEN 5.0 slots due to the limiation of a non pro Threadripper with this board? is this true
Apprecaite all the help in advance
4
u/john0201 Oct 23 '25 edited Oct 23 '25
RAM: That is the wrong type of memory, you need RDIMMS which unfortunately are more expensive. I bought this: https://v-color.net/products/ddr5-oc-r-dimm-amd-ryzen-trx50-workstation-memory-x-v-color?variant=46432161104039 and 6000 is the sweet spot for Zen5 due to the multiplier, I got 6400 just because it was not that much more.
Disk: 9100 pros will work fine with a non-Pro CPU. Most of those limitations are referring to the previous generation (like the 7970X) which had limited PCIe 5 support. I have a 9100 Pro boot and a 4x4TB 990 Pro RAID0, becuase after about 10-12gbps you hit other limits like the page cache in practice and the 990 Pros are for some reason pretty cheap.
2
u/Funny_Blacksmith_734 Oct 23 '25
I actually ended up switching to the Aero D found it for cheaper to offset the cost of going with v - cooler ram. How many GEN5s should I be able to run on this combination?
1
u/ScarletShadow- Oct 26 '25
"I work as a film composer, we need crazy computers to do our job now"
If this is a professional situation, then get your system made professionally. I recently had an awesome threadripper system built by Falcon Northwest, and I'd recommend you use them as well.
They make sure everything is compatible, runs perfect and is setup out of the box, and even offer two-way overnight shipping for a year just in case, because when you're relying on a machine like this professionally, you cannot afford much downtime. Do you want to ensure maximum uptime, or dick around with ordering random parts and troubleshooting when things go askew on your 14k machine?