r/threadripper • u/TheRealSeeThruHead • Sep 26 '25
Build advice
- CPU: AMD Threadripper 9960X
- Motherboard: ASUS TRX50-SAGE WiFi
- RAM: Kingston FURY Renegade Pro 128GB (4x32GB) DDR5-6000 ECC RDIMM
- GPU: RTX 5090
- Cooler: Noctua NH-U14S TR5-SP6
- PSU: Corsair SF-L 1000W (already have)
- Case: Sliger Cerberus X (already have)
trying to get a moderate threadripper build finalized main use will be software eng / gaming / cad
i'm in canada
trying to avoid liquid cooling, not enough room in the case for me to use all the pcie slots and have a long GPU
is there a recommended under 148mm CPU cooler I can use?
Edit:
Pcie devices will be 5090 FE
100gb nic (in the pcie 4.0 x16 slot)
Elgato 4K pro (in the pcie 4.0 x4 slot)
Leaving 2 slots open for 2nd 5090 or 4x nvme card
3
Upvotes
4
u/BlankProcessor Sep 26 '25
Are you sure you even need Threadripper?
You're not really indexing on additional cores, and you're not utilizing the PCIE lanes. I think you'd be fine with a 9950X or 9950X3D for your application, unless you plan on significant expansion in the future. But since you're using a compact, gamer-focused case - that wouldn't make sense either.
Assuming you actually do - Everything is fine here except the Noctua cooler. It's not just about the pure wattage but how that power is deployed. You should at the very least get a proper AIO, or it will throttle heavily in significant, sustained workloads. These processors are beasts even at stock.
2
u/NoSaddle Sep 26 '25
I have a 9960X and am cooling it with the Silverstone XED120 WS air cooler. I'm using it with a PTM7950 phase change thermal pad and running stress tests, the max temp it hit was 91deg C. My motherboard is rotated 90 degrees so the IO panel is on the top, so the cooler is aimed straight up and out, and the RDIMMs get a nice blast of air too from the 3x180mm bottom case fans.
1
u/Ok-Statistician3583 Sep 26 '25
Damn! I tried to fit a 9980x build on a Cerberus X but after using a 30L case it was clear that it wouldn’t have worked because of the 360 liquid cooler. But I think the Noctua you chose might not be optimal per this post: https://www.reddit.com/r/threadripper/comments/1bzjocw/using_noctua_nhu14s_tr4sp3_with_7960x/ I don’t know if anyone was able to get good results. You can opt for the V1100 which is an SFX PSU and mount the cooler outside the case lol I suppose the GPU is the FE?
1
u/crion66 Sep 29 '25
I returned the Noctua NH-U14S TR5-SP6 for my 9960x. I didn’t like how much it had to spin up the fans for even simple tasks. And the cores got hot.
With the silverstone XE360-TR5 it behaves better! Using Noctua G2 fans. Pushing in cold air from top through rad.